Pneumatic Spooling Unit

Storm Choke® K safety valves are ambient-type, wireline retrievable valves with the largest flow area of all direct controlled safety valves on the market. They are ideally suited for high-volume, low-pressure wells. These valves are normally closed and pre-charged with a set dome pressure. When the well flowing pressure drops below the predetermined dome-pressure charge because of a rupture in flowline or surface equipment, the dome pressure and main valve spring close the valve, shutting in the well below the earth’s surface. This valve contains a detent mechanism to provide a positive snap-action closure at the predetermined disaster rate of the valve. Its bore is not restricted by a flow bean. The valve is designed to resist pressure surges. A metal-to-metal poppet valve and seat comprise the valve’s primary closure mechanism. The K valve is ideal for protecting wells with declining bottomhole pressure. This valve closes in situations where a pressure decline would not activate a valve with a flow bean. To reopen the valve, the operator must fully equalize pressure either by applying pressure in the tubing from the surface or by an equalizing prong. The valve will reopen when the tubing pressure acting on the internal piston area overcomes the dome charge. Applications » Wells with declining bottomhole pressure » High-volume, low-pressure wells » Wells with no provisions for surface-controlled valves Features » Poppet closure » Large ports with capacity for high-volume wells » Designed to resist pressure surges *description excerpted from manufacturers catalogue.

Houston Digital Instruments (HDI) is proud to present the 1000P Pressure Gauge System, a versatile and dependable solution designed to meet your pressure measurement needs. Built on our 30-year field-proven platform, this intrinsically safe, solid-state electronic gauge is the go-to choice for applications requiring accurate readings, even in high vibration and rugged environments. Unmatched Readability and Durability: The 1000P Pressure Gauge System is engineered to deliver clear and reliable pressure readings, regardless of lighting conditions. Our innovative design ensures that the gauge remains easily readable, providing crucial information at the point of measurement. Whether you require a primary or secondary readout, the 1000P delivers consistent performance, making it the ideal choice for critical operations. Exceptional Accuracy and Range: At HDI, accuracy is our priority. The 1000P offers pressure ranges up to 20,000 psi, providing the versatility to meet a wide range of application requirements. With an accuracy of 0.50% of full scale, you can trust that your pressure measurements are precise and reliable. Benefit from our extensive experience as the 1000P has been successfully deployed in the field for over 10 years, proving its performance and durability. Designed for Efficiency and Ease of Use: We understand the importance of simplicity and convenience. The 1000P Pressure Gauge System is powered by batteries, eliminating the need for external power sources and ensuring hassle-free operation. The field repairable system minimizes downtime and reduces maintenance costs, allowing you to focus on your operations with confidence. A low battery indicator keeps you informed of the system's power status, ensuring uninterrupted performance when it matters most. Tailored to Your Application: The 1000P can be utilized in various applications with different connection types, providing flexibility and adaptability to meet your specific needs. Choose from 2" 1502, 2" 2002/2202, flanged, or nut connections, ensuring seamless integration with your existing systems. Our team of experts is ready to assist you in selecting the optimal configuration for your application, ensuring the best performance and compatibility. Quality You Can Trust: HDI is synonymous with safety, accuracy, reliability, and low maintenance. The 1000P Pressure Gauge System upholds these qualities, providing you with peace of mind and enabling efficient and effective pressure monitoring. We are committed to delivering products that withstand the test of time and provide consistent performance in demanding environments. Expand Your Measurement Capabilities: Upgrade your pressure measurement capabilities with the 1000P Pressure Gauge System. Benefit from its reliable performance, durability, and ease of use. Whether you require primary or secondary readouts, this gauge system is designed to meet your needs with unmatched accuracy and versatility. Contact Houston Digital Instruments today to discuss your specific application requirements. Our team of experts is ready to assist you in selecting the ideal solution for your pressure measurement needs. Trust HDI for excellence in measurement and monitoring solutions. Together, we'll achieve efficiency, safety, and success.

Discover the Convenience of Safe-T-Whip Equipment Rental: Your Hassle-Free Solution At Safe-T-Whip & Restraints Inc., we understand the ever-changing needs of your oilfield projects. That's why we are thrilled to offer our top-of-the-line Safe-T-Whip restraints on rental, providing you with a maintenance-free, certified, and budget-friendly solution. Maintenance-Free Peace of Mind: Say goodbye to the hassles of maintenance and inspections. With Safe-T-Whip equipment rental, you'll receive a full line of pre-inspected and certified restraints, ready to tackle the challenges of your projects. Focus on your core operations, while we take care of the safety aspect for you. Try Before You Commit: Not sure if the Safe-T-Whip system is right for your project? Our equipment rental option is perfect for trying out the system before making a long-term commitment. Discover the benefits and efficiency of our restraints firsthand. Flexibility for Short-Term Projects: Short-term projects demand flexibility, and we've got you covered. Our rental service caters to projects of any duration, allowing you to equip your site with top-notch safety restraints for the required timeframe, without long-term commitments. Certified Installation or In-House Training: As part of our turn-key project services, our team of certified installers can assemble the entire Safe-T-Whip system for you, ensuring everything is in place for optimal safety. Alternatively, we offer comprehensive training to one of your own team members through our Safe-T-Whip certification process, empowering them to assemble or disassemble the system on demand. Nationwide Availability: Easy access to our safety solutions is our top priority for you. Safe-T-Whip equipment rental is available throughout Canada, either directly from Safe-T-Whip & Restraints Inc. or through our approved and certified suppliers. No matter where your project is located, we've got you covered. Tailored Solutions for Your Needs: Every project is unique, and so are our rental plans. Let us know your project requirements, and we'll work closely with you to provide the best-suited solution, ensuring the fastest and easiest way to secure the required number of restraint lengths, no matter the project's size. Safety Simplified: Safe-T-Whip equipment rental offers a simplified approach to safety, empowering you to focus on your operations with the confidence that your workforce is protected by the industry's best restraint system. Contact us today and explore the world of convenience and safety with Safe-T-Whip & Restraints Inc. Let us take care of your safety needs while you focus on what you do best - running a successful oilfield operation.

KEY360 Inc offers a single integrated Business Management Platform comprising Business Intelligence, Project Management, Big Data & Analytics, ERP, Behaviour and Strategy Modification. - Over 140 Business and Project Management Systems on one platform available - Unique and extremely effective workflow engine - Remarkable “BIG DATA” and bulk transaction capability - Integrated Real Time reporting and dashboarding - Multi-company platform allows all project users to integrate seamlessly KEY Differentiators: - KEY360 Provides an exceptional opportunity for your organisation to attract new clients and build long terms relationships. - KEY360 is a Microsoft Gold Partner and Approved Microsoft Co-Sell Partner and can be purchased directly from the below online marketplaces: - Microsoft AppSource: KEY360 Capital Management Projects - Azure Marketplace: KEY360 Capital Management Projects - KEY360 is reputedly the most comprehensive and versatile Capital Project Management, Business Digitalization & Business Optimization solution available.

The spill kit contains a curated selection of components designed for effective and targeted response to oil-based spills. 5 Oil-Only Absorbent Pads Size: Standard 8” x 11.5” Purpose: Swiftly absorb and contain oil-based liquids, preventing further spread and facilitating quick cleanup. 3 Oil-Only Absorbent Pillows Size: 18” x 18” Purpose: Larger pillows for enhanced absorption, particularly useful for managing larger volumes of spilled oil. 2 Oil-Only Absorbent Socks (3"x4') Size: 3 inches in diameter, 4 feet in length Purpose: Contain and control the spread of oil spills, especially effective in restricting the movement of liquids in confined spaces. Disposal Bags Purpose: Facilitate the proper containment and disposal of used absorbent materials, ensuring a responsible and hygienic cleanup process. Nitrile Gloves (1 Pair) Purpose: Essential personal protective equipment for safe handling during the cleanup, protecting hands from direct contact with oil-based substances. Advantages and Applications • The combination of pads, pillows, and socks caters to different spill sizes and scenarios, providing a versatile solution for oil-based spills. • The inclusion of larger pillows enhances the kit's capacity to address spills effectively, ensuring a swift and comprehensive cleanup process. • Nitrile gloves prioritize the safety of personnel involved in the cleanup, preventing direct contact with potentially harmful substances. • Disposal bags contribute to responsible waste management, ensuring the proper containment and disposal of used absorbent materials. The spill kit is well-suited for a range of industrial operations, where oil-based spills may occur. Its comprehensive components make it a valuable tool for addressing various spill sizes and ensuring a quick, efficient, and environmentally responsible cleanup process. The spill kit boasts a total absorption capacity, capable of absorbing up to 15 liters (3.87 gallons) of liquid. This capacity signifies the kit's effectiveness in managing spills of varying sizes, making it a reliable and versatile solution for fluid cleanup. Whether addressing smaller incidents or more substantial spills, the spill kit's impressive absorption capacity ensures a comprehensive and efficient response to liquid-based challenges. Water-Resistant Spill Kit is designed for oil-based spills, showcasing water-resistant properties. The kit's composition ensures effective cleanup of oil spills in diverse environments, including land, rivers, lakes, and oceans. By selectively absorbing oil while repelling water, it provides a reliable solution for managing oil spills in various settings, making it versatile and suitable for a wide range of spill response scenarios.

Introducing Enviro-Syn® BSD-40™: The Solution to Your NORM Scale Dissolving and Descaling Needs Cleanstream is excited to present our high-performance NORM scale dissolver and descaler, Enviro-Syn® BSD-40™. Our product is specially designed to efficiently remove sulfate scale, with a unique ability to dissolve extremely high amounts of barium sulfate scales. We understand the challenges that come with BaSO4 scale formation, such as reduced production, bacterial growth, fouling of piping, tanks, and process equipment. These issues can greatly reduce the profitability of your operations. That's why we have created Enviro-Syn® BSD-40™, a product that can effectively remove these scales and help improve your operations' profitability. Our product is highly versatile and can be used in a variety of applications, including down-hole scaling issues, production well near wellbore damage from barite-based mud systems, heat exchangers/pipelines, on-shore/off-shore topside processing and production treatments, industrial boiler systems, geothermal well scale treatments, separators/hydrocyclones/degasser treatments, and injection well treatments. One of the significant advantages of Enviro-Syn® BSD-40™ is that it is not corrosive to metal or typical oilfield elastomers and seals. This means that you can use our product without the risk of damaging your equipment. At Cleanstream, we are committed to providing high-quality products that are safe for the environment and the people who use them. Our product is designed to meet the highest industry standards while providing exceptional performance. So why wait? Make the switch to Enviro-Syn® BSD-40™ today and experience the benefits of a highly effective NORM scale dissolver and descaler that is safe for your equipment and the environment. Contact us to learn more about how you can get started with Enviro-Syn® BSD-40™ and start improving your operations' profitability.

SSG Consulting is a Project, Engineering and Construction Management Consulting firm, specializing in the implementation of Business and Project Management solutions on Mega projects in various industries. - Authorised KEY360 channel partner Our services cover the following: - Project Advisory & Audits - EMPCM Execution - Specialist Project Controls & Forensics - Project Digitalisation - Project Resourcing - Analytics & Dashboarding Our Track Record: - 25 BILLION MANAGED VALUE - 300 MILLION PLATFORM TRANSACTIONS - 80 DEDICATED STAFF - 10X BUSINESS PROCESSES IMPROVEMENT

KEY360 Inc offers a single integrated Business Management Platform comprising Business Intelligence, Project Management, Big Data & Analytics, ERP, Behaviour and Strategy Modification. - Over 140 Business and Project Management Systems on one platform available - Unique and extremely effective workflow engine - Remarkable “BIG DATA” and bulk transaction capability - Integrated Real Time reporting and dashboarding - Multi-company platform allows all project users to integrate seamlessly KEY Differentiators: - KEY360 Provides an exceptional opportunity for your organisation to attract new clients and build long terms relationships. - KEY360 is a Microsoft Gold Partner and Approved Microsoft Co-Sell Partner and can be purchased directly from the below online marketplaces: - Microsoft AppSource: KEY360 Capital Management Projects - Azure Marketplace: KEY360 Capital Management Projects - KEY360 is reputedly the most comprehensive and versatile Capital Project Management, Business Digitalization & Business Optimization solution available.

Storm Choke® K safety valves are ambient-type, wireline retrievable valves with the largest flow area of all direct controlled safety valves on the market. They are ideally suited for high-volume, low-pressure wells. These valves are normally closed and pre-charged with a set dome pressure. When the well flowing pressure drops below the predetermined dome-pressure charge because of a rupture in flowline or surface equipment, the dome pressure and main valve spring close the valve, shutting in the well below the earth’s surface. This valve contains a detent mechanism to provide a positive snap-action closure at the predetermined disaster rate of the valve. Its bore is not restricted by a flow bean. The valve is designed to resist pressure surges. A metal-to-metal poppet valve and seat comprise the valve’s primary closure mechanism. The K valve is ideal for protecting wells with declining bottomhole pressure. This valve closes in situations where a pressure decline would not activate a valve with a flow bean. To reopen the valve, the operator must fully equalize pressure either by applying pressure in the tubing from the surface or by an equalizing prong. The valve will reopen when the tubing pressure acting on the internal piston area overcomes the dome charge. Applications » Wells with declining bottomhole pressure » High-volume, low-pressure wells » Wells with no provisions for surface-controlled valves Features » Poppet closure » Large ports with capacity for high-volume wells » Designed to resist pressure surges *description excerpted from manufacturers catalogue.

Optimize Downhole Operations with HOCA Oil Tools' BHP Tool Accessories In the ever-evolving oil and gas industry, precision, reliability, and efficiency are paramount. At HOCA Oil Tools, we understand the critical nature of accurate downhole data collection and the tools required to achieve this. Our BHP (Bottom Hole Pressure) Tool Accessories are designed to complement and enhance the performance of downhole pressure measurement tools, ensuring that operators can obtain the most accurate and reliable data possible. HOCA’s BHP Tool Accessories: Enhancing Downhole Data Collection Our BHP Tool Accessories range from specialized adaptors and seals to shock absorbers and carriers, all engineered to ensure that your downhole pressure measurement tools operate at peak efficiency. These accessories are crucial for protecting sensitive instruments, ensuring proper tool placement, and enhancing data transmission from the downhole environment to the surface. Manufactured with the highest quality materials and designed to meet rigorous industry standards, HOCA’s BHP Tool Accessories are the solution to optimizing your downhole operations. Experience the HOCA Oil Tools Advantage Choosing HOCA Oil Tools’ BHP Tool Accessories means opting for quality, reliability, and performance. Our commitment to excellence ensures that our products not only meet but exceed the stringent demands of the oil and gas industry. Whether you’re measuring downhole pressures, temperatures, or other critical parameters, our accessories provide the support needed to ensure successful data collection. Integrating our BHP Tool Accessories into your downhole toolkit signifies a step toward enhanced operational success and efficiency. With HOCA Oil Tools, you gain a partner dedicated to supporting your downhole challenges with innovative solutions and expert service. Select HOCA Oil Tools for your BHP Tool Accessories and transform the efficiency and accuracy of your downhole operations. Partner with us, and unlock the full potential of your downhole data collection with tools and accessories designed for success. With HOCA Oil Tools, you’re not just investing in products; you’re investing in the future of your downhole operations.

ELEKS Software Testing and QA Services: Elevate Your Product Excellence In the fast-paced realm of software development, delivering a product that not only works but excels is the key to standing out in the crowd. ELEKS Software Testing and QA Services empower you to not just meet industry standards, but to exceed them. With our custom-built services, you can ensure a robust, high-performing, and user-centric product that captures your audience's attention. ELEKS Software Testing and QA Services: Your Path to Excellence Deliver Seamless User Experience: Our performance testing service empowers you to address issues related to peak performance, responsiveness, security, and stability long before your users encounter your product. By mitigating brand-damaging lag or downtime, you can confidently deliver an experience that resonates with your audience. Accelerate Time-to-Market: With our support, you can speed up your product's journey to market by up to 80%. Through performance and test automation services that align with continuous integration and deployment, we identify issues early in the development cycle, enabling you to avoid costly rework. Trim Development Costs: ELEKS' testing services uncover issues during the early stages of your Software Development Lifecycle (SDLC) when rectifications are less expensive. Experience up to 20% reduction in testing costs with our test automation service, which streamlines human resources and testing time. What's more, your custom test scripts can be reused at no additional cost. Scale Your Business Rapidly: Implement continuous Quality Assurance (QA) to adapt swiftly to your customers' evolving needs. Our independent testing service offers an impartial second opinion, enhancing your ability to identify pitfalls and risks and giving you the confidence to scale your business. Ensure Software Compliance: Guarantee your software aligns with critical quality standards like IEEE 829, ISO 29119, IEEE 730, and ISO 25010. Our framework adheres to industry standards across performance testing, independent testing, and automated testing processes. ELEKS Software Testing and QA Services: Unveiling Excellence Software Audit: Assess your code's quality, test coverage, security, user experience, and integration layer with our software audit service. Make the necessary enhancements to ensure your product's integrity. Performance Testing: Leverage our performance testing service to construct responsive, stable, and scalable applications with an astounding 80% reduction in testing time. Test Automation: Experience up to 20% cost reduction in manual QA expenses. Our test automation detects bugs, eliminates human errors, and tests your software's resilience, ensuring excellence at every level. ELEKS Software Testing and QA Services: Elevate Your Excellence ELEKS Software Testing and QA Services lead you on a journey where quality isn't just a goal – it's a guarantee. Elevate your software products to excellence, with high-performance, user-optimized solutions that exceed expectations. Harness the power of ELEKS to not only meet industry standards but to set new benchmarks for software excellence.

Enhance Your Mining Operations with Wisdom's KL5MS Corded Miner's Cap Lamp from Provix Provix is proud to introduce the Wisdom KL5MS Corded Miner's Cap Lamp, a top-tier lighting solution engineered to meet the rigorous needs of the mining industry. Combining advanced technology with user-focused design, the KL5MS ensures both safety and efficiency for miners under the most challenging conditions. Powerful and Efficient Illumination The KL5MS boasts a high-capacity 7,800mAh battery, delivering a continuous discharging time of 13 hours. It features a main light LED with a working voltage of 3.0V, current of 640mA, and power of 1.92W. This efficient configuration provides a luminous flux of 340 lm, along with an impressive initial lighting degree of 18,000 lx at 1 meter, ensuring excellent visibility in dark mining environments. Durability and Longevity Designed for the long haul, the KL5MS has a main light life span of 50,000 hours and an auxiliary light life span of 40,000 hours. The battery's life span extends to 1,200 cycles under normal working conditions, underscoring the lamp's reliability and long-term performance. Safety as a Priority Safety is paramount in mining, and the KL5MS is crafted with this in mind. It is explosion-proof, adhering to ATEX GROUP II standards, and has an IP68 waterproof rating. Additionally, the lamp features a short circuit protection time of less than 320 μs, further enhancing its safety profile. Ergonomic Design for Comfort The KL5MS is designed with the comfort of the miner in mind. Weighing just 550g (19.40 oz) and with a main cable length of 1.4 to 1.65 meters (4.59 to 5.41 feet), it offers ease of use and mobility. The compact dimensions of the battery box (94 x 36 x 90 mm; 3.7 x 1.4 x 3.5 in) ensure that it is not cumbersome during extensive use. Quick and Convenient Charging With a charging time of just 4 to 7.5 hours, the KL5MS is ready for use quickly, reducing downtime and enhancing productivity. The USB charging feature adds an extra layer of convenience, allowing for easy charging in various settings. Get Yours Today Upgrade your mining gear with the Wisdom KL5MS Corded Miner's Cap Lamp for improved visibility, safety, and efficiency. Contact Provix for more information, visit our website at www.provix.net, or come see us in person. The Wisdom KL5MS is your key to safer, more efficient mining operations.

Introducing the BBT Boot Basket from Marlin Oil Tools: The Ultimate Solution for Efficient Debris Management in Oil and Gas Operations Marlin Oil Tools is proud to present the BBT Boot Basket, a cutting-edge tool designed for optimal debris management during oil and gas drilling, milling, or garbage collection operations. Engineered to trap large pieces of sludge that cannot be circulated out of the well to the surface, the BBT Boot Basket is an essential component for maintaining clean and efficient wellbore conditions. Here’s why the BBT Boot Basket is a must-have for your operations. Key Features of the BBT Boot Basket: Efficient Debris Capture: Utilizing a unique design, the BBT Boot Basket efficiently captures large particles. The high-speed upstream flow created by the annular space's small restriction in the lower part of the tool allows for effective trapping as the flow slows down when it passes the upper part, where the gap increases sharply. Optimal Positioning: Designed to be positioned as close to the mill or bit as possible, the BBT Boot Basket ensures that milling procedures can be carried out in normal mode with standard circulation, maximizing debris capture efficiency. Enhanced Capacity Options: To accommodate varying operational needs, several BBT Boot Baskets can be used within the same Bottom Hole Assembly (BHA) to increase overall debris trapping capacity. Customizable Length: Recognizing the diverse requirements of our clients, Marlin Oil Tools offers the option to produce the BBT Boot Basket in different lengths, ensuring a perfect fit for every operation. Durability and Ease of Maintenance: The simple yet robust design of the BBT Boot Basket not only ensures excellent strength characteristics for withstanding torsion and tension but also allows for quick and easy redress, minimizing downtime and extending tool life. Elevate your wellbore cleaning operations with the BBT Boot Basket from Marlin Oil Tools, a premier solution for trapping large sludge particles during drilling, milling, or garbage collection in the oil and gas industry. Featuring an efficient design for optimal debris capture and customizable length options, the BBT Boot Basket enhances operational cleanliness and efficiency. With the capability to position the tool close to the mill or bit and the option to use multiple units for increased capacity, the BBT Boot Basket is adaptable to various operational needs. Its durable construction and easy maintenance ensure long-term reliability and performance. Choose the BBT Boot Basket for a cleaner, more efficient wellbore. Why Choose the BBT Boot Basket from Marlin Oil Tools? Superior Debris Management: Effectively traps large particles, ensuring cleaner wellbore conditions. Customizable and Versatile: Offers options for different lengths and the use of multiple baskets for increased capacity. Durable and Easy to Maintain: Designed for durability and easy redress, reducing operational downtime and costs. Optimized for Efficiency: Enhances milling procedures and maintains normal circulation, optimizing well intervention operations. For operators looking to improve their debris management strategy and maintain efficient well operations, the BBT Boot Basket by Marlin Oil Tools is the ideal solution. Contact us today to learn more about how our innovative oil and gas coiled tubing tools can benefit your operations.

Enhance Your Manufacturing Precision with Lathe Leasing from CWB National Leasing Transforming Your Production with Flexible and Advanced Equipment Solutions In the manufacturing and metalworking industries, lathes are essential for precision shaping and machining of various materials. Leasing lathes through Canadian Western Bank (CWB) National Leasing provides a strategic and financially sensible solution for businesses looking to upgrade or expand their production capabilities. Here’s how leasing lathes can benefit your manufacturing operations: 1. Rapid Equipment Procurement CWB National Leasing understands the need for timely equipment acquisition in fast-paced manufacturing environments. They offer a swift leasing process, with decisions typically made within 48 hours of application submission. This quick turnaround means your lathes can be delivered and operational promptly, minimizing disruption and enhancing your production line efficiency. 2. Increased Financial Leverage Leasing lathes with CWB National Leasing empowers your business with enhanced buying power. Opting for periodic payments over a hefty initial purchase frees up capital for other vital business needs. Additionally, the flexibility to add extra features or accessories to your lathes for a small payment increase allows for customization to meet your specific production requirements. 3. Effective Cash Flow Management Smaller lease payments over the term mean your lathes start contributing to your business’s revenue while they're still being paid off. This approach is essential in maintaining a balanced expense-to-revenue ratio, crucial for the financial health and growth of your business. 4. Customizable Payment Plans CWB National Leasing offers various payment options, including seasonal, semi-annual, or annual plans, tailored to your business’s revenue cycle. This flexibility is particularly beneficial for businesses with fluctuating or seasonal income, ensuring that payments are manageable and fit your financial situation. 5. Potential Tax Benefits Leasing lathes can offer tax advantages, such as the ability to expense lease payments instead of capitalizing the cost of the equipment. Consulting with a tax advisor is recommended to explore how leasing can optimize your business’s tax position. Conclusion Opting to lease lathes through CWB National Leasing is a strategic decision that equips your manufacturing business with essential machinery while maintaining financial agility. It ensures access to advanced lathes, vital for precise and efficient production, without the financial burden of a large upfront investment. This leasing approach enables enhanced operational capabilities, increased production capacity, and greater profitability, helping your business to thrive in the competitive manufacturing sector.

The Lufkin Conventional Crank Balanced Pumping Unit, widely known and accepted, is the old reliable “Work Horse” of the oil patch. This is the most universally adaptable unit in the Lufkin line. These units are simple to operate and require minimum maintenance. Unit Size* C-1824D-305-240 A 120.00 B 228.00 C 340.00 E 263.50 F 396.50 H 545.00 I 25.50 J 110.00 L 64.00 M 80.25 N - N1 24.50 R 161.00 T 58.88 U 92.38 V 52.00 W 50.00 X 112.50 AA 51.69 AB 90.88 UU 24.13 VV 57.00 In addition to being the world’s leading manufacturer and supplier of sucker rod pumping units, Lufkin Oilfield Services refurbishes and sells used pumping units and provides installation, field service, machine shop repair and new OEM parts for its’ customers. All brands – Lufkin, Churchill, American, LeGrand, Bethlehem, National, etc. – are supported. Additionally, Lufkin Automation is the industry leader in oil production automation and well optimization products and services (pump-off controllers, dynamometers, fluid level equipment, well analysis, design/analysis software, well design consulting and training). With the acquisition of Delta-X and Nabla and with thousands of controllers in service, Lufkin Automation continues the Lufkin tradition of helping producers lower their production costs and optimize well efficiency.

Introducing the X-SPAN Tubing/Casing Patch System from ID OILTOOLS! This proven, durable and dependable system is the solution you've been looking for to seal perforations, holes, splits, corrosion or leaks of any kind in all types of tubulars. The X-SPAN system is incredibly versatile and can be deployed using a myriad of methods in virtually any type of well bore. It's the economical and reliable solution for a wide range of applications, including shutting off unwanted water or gas influx, zonal protection for frac-through applications, repairing tubular leaks from pin holes to collar leaks, repairing corroded or eroded tubing or casing, as well as isolating frac ports and auxiliary tools in horizontal wells. With its large bore, the X-SPAN system allows for easy passage of service tools including bridge plugs, drop balls, seal bore assemblies, logging tools and perforating systems. Plus, its minimal surface equipment required for deploying the patch and rigless intervention results in significant savings for the operator. The metal-to-metal X-SPAN seal is proven technology engineered for high temperature applications while yielding the highest burst and collapse pressure ratings in the industry. The X-SPAN Tubing Casing Patch can be deployed to protect up to 300ft (91m) sections of tubing or casing on a single trip. Multi-trip stackable systems are available to span intervals longer than 300ft (91m). At ID OILTOOLS, we understand that extreme well bore environments require premium alloys. That's why we offer custom sized X-SPAN systems designed using premium alloys to meet your specific needs. Choose the X-SPAN Tubing/Casing Patch System from ID OILTOOLS for proven, reliable and versatile tubular repair solutions. Contact us today to learn more!

Introducing the Canaweld TR4-D Series Welding Cart - Your Ultimate Welding Companion! Are you tired of welding carts that just don't meet your needs? Look no further - Canaweld's TR4-D Series is here to revolutionize your welding experience. Our design team has meticulously crafted a welding cart that addresses all the flaws and drawbacks of existing carts, giving you a product that is versatile, sturdy, and designed to cater to your specific requirements. Unmatched Versatility: The TR4-D Series welding cart is a true game-changer. It's compatible with a wide range of welding machines, including MIG, TIG, Stick, Plasma, Cooling Unit, and more. Plus, you have the flexibility to choose between the TR4-D1-1 Single Gas Bottle configuration or the TR4-D1-2 Double Gas Bottle configuration, depending on your needs. Need extra storage space? You can even opt for a version with a cabinet to keep all your welding helmets and personal items neatly organized. Smart Design for Easy Transport: Transporting your welding equipment has never been easier. The TR4-D Series welding cart boasts a lightweight yet robust construction that guarantees easy mobility. The excellent balance ensures smooth movement, even on slanted surfaces, making it perfect for use in the oil and gas industry's demanding conditions. Customizable to Fit Your Machines: We understand that every welding machine is unique, which is why the TR4-D Series offers a middle horizontal panel that can be adjusted to the height of different machines. With CNC machine precision manufacturing, assembly is a breeze, and the fixed nut system eliminates the need for time-consuming nut separation. Experience quick and accurate installation, allowing you to focus on what matters - welding! Safety and Security at the Core: Safety is paramount when it comes to welding equipment. The TR4-D Series welding cart comes equipped with belts, locks, and chains to keep your gas bottles and capsules securely in place. The added security lock ensures your machine stays safe during transport and storage. Smooth Maneuverability: Navigating through your welding workspace is effortless with the TR4-D Series welding cart. The front swivel casters with brakes, along with the 10-inch wheels at the back, allow for smooth and stable movement, even in tight spaces. Built to Last: We understand that durability is vital in the oil and gas industry. That's why the TR4-D Series welding cart features galvanized parts, providing enhanced protection against scratches and wear, ensuring it stands the test of time. Unparalleled Convenience: We've thought of everything to make your welding experience a breeze. The TR4-D1-2 Double-Gas-Bottle model even includes storage space for TIG ROD, brackets for hanging welding cables and power cords, and a TIG Torch and MIG GUN holder. Elevate Your Welding Experience: Don't settle for subpar welding carts that fail to meet your expectations. Upgrade to the Canaweld TR4-D Series Welding Cart and experience the ultimate in versatility, convenience, and durability. Take your welding to new heights with Canaweld - your trusted partner in welding excellence.

Storm Choke® H safety valves are ambient-type, wireline retrievable valves that are normally closed and precharged with a set dome pressure. When the well flowing pressure drops below the predetermined dome-pressure charge, as a result of a rupture in the flowline or surface equipment, the dome pressure and valve spring are designed to close the valve, shutting in the well. The H valve is used in wells producing large volumes of abrasive fluids. Its large bore is not restricted by a flow bean. The valve is designed to resist pressure surges. A metal-to-metal (MTM) ball and seat is used as the primary closure mechanism. The H valve is ideal for protecting wells with declining bottomhole pressure because this valve is tubing pressure sensitive instead of velocity sensitive. To reopen, the valve pressure must be fully equalized either by applying pressure in the tubing from the surface or by running a prong to allow equalization from below. The valve will reopen when the tubing pressure acting on the internal piston area overcomes the dome charge. Applications » Wells producing large volumes of abrasive fluids » Wells with declining bottomhole pressure » Wells with no provisions for surface-controlled valves Features » Large bore not restricted by a flow bean » MTM ball and seat » Designed to resist pressure surges *description excerpted from manufacturers catalogue.

ELEKS IT Technical Support and Maintenance Services: Your Steady IT Compass In today's dynamic business landscape, flawless IT operations are imperative. The ever-evolving tech ecosystem requires impeccable management of technical challenges and periods of transformation. Enter ELEKS' advanced IT support and maintenance services – your guiding light in the realm of IT stability. ELEKS IT Technical Support and Maintenance Services: Guiding Your Path Protect Your IT Solution: Identifying issues and potential risks with your IT solution is the first step towards ensuring uninterrupted operations. Our swift resolutions minimize revenue loss and enable you to adapt seamlessly to environmental, IT infrastructure, and integration changes. No matter the landscape shift, your systems remain operational. Reinforce Your Skills: Equipped with expertise across multiple technological domains, we stand ready to help you overcome technical challenges and navigate digital transformations. Our knowledge base sets the stage for faster incident resolution and empowers your end-users with self-service capabilities, ensuring readiness for future changes. Overcome Complex Issues: Our IT technical support and maintenance services offer two tiers – L2 and L3. L2 swiftly gets you back on track post-failure, while L3 dives deep into complex issues, improving software by altering program code for enhanced performance. Reduce TCO of IT Systems: Years of experience pave the way for a seamless setup and robust support framework. This not only slashes your Total Cost of Ownership (TCO) but also facilitates faster issue resolution, garners superior customer feedback, and curtails systems maintenance expenditure. Transfer and Manage Duties and Risks: Our services enable your in-house team to focus on your core business, while we manage your IT infrastructure. Moreover, we're poised to provide after-hours support, ensuring you're covered for unforeseen circumstances. ELEKS IT Technical Support and Maintenance Services: Navigating Reliability Problem Resolution: Once an issue is reported, our team swiftly isolates the root cause and resolves it. Our proactive approach involves setting up monitoring tools to preempt incidents and potential problems, ensuring seamless operations for your users. L2 Technical Support: Quick recovery following a systems failure is guaranteed with our L2 support, all without making any alterations to your software code. This comprehensive service covers applications, databases, integration points, related environment components, and virtual cloud infrastructure. L3 Technical Support: For advanced software issues and improvements, our L3 support is your go-to solution. Our team of experts adeptly modifies your program code, covering everything from bug fixes and security/performance issues to system compliance checks and updates to integration interfaces. ELEKS IT Technical Support and Maintenance Services: Your IT Rock In a world where IT stability is paramount, ELEKS emerges as your steadfast partner. With our advanced support and maintenance services, your IT ecosystem gains the strength to navigate challenges and seize opportunities. Trust ELEKS to be your IT compass, guiding you towards unwavering operations and unwrapping the full potential of your digital endeavors.

The FXE wireline-retrievable flapper valve, which is normally closed, is held open by hydraulic control pressure from the surface. The valve operates on a hydraulic piston principle. To open, hydraulic pressure slightly higher than the well pressure is applied to move the piston downward. This pressure unseats the secondary seat, allowing pressure to enter through equalizing ports. Then, as additional hydraulic pressure is applied to the piston, it continues downward movement, pushing the flapper open. The flapper hinge assembly is designed such that the force on the piston is not applied directly on the hinge pin. Upon loss of hydraulic pressure in the control line, the valve’s large spring serves to lift the hydrostatic head of the control fluid. The flapper spring is designed to close the valve when the piston moves up past the flapper. Opening Prong Nose Seal The FXE valve uses the valve housing as the downstop for the opening prong. This metal-to-metal (MTM) interface is designed to prevent flow from passing between the valve housing and the opening prong. The MTM interface isolates the flapper and seat from fluid flow while the valve is open. This design creates an MTM interface with the full force exerted by the hydraulic piston, minus the spring compression force, holding the two metal faces in contact. Radius of Curvature at Flow Entrance Halliburton conducted a study with various curvatures on the entrance to the valve. The study tested abrasive fluids flowing through different test subs and examined the resulting wear patterns. As a result, an optimum radius of curvature was determined and implemented on the valve housings of all wireline-retrievable safety valves. Applications » General production completions Features » Equalizing-type flapper closure » Solid construction flapper made from bar stock » Spherical radius seat on flapper improves seal reliability » Sealing and seating surfaces are out of the well production flow path when valve is in the open position *information referenced from supplier catalog.