Geothermal

The FXE wireline-retrievable flapper valve, which is normally closed, is held open by hydraulic control pressure from the surface. The valve operates on a hydraulic piston principle. To open, hydraulic pressure slightly higher than the well pressure is applied to move the piston downward. This pressure unseats the secondary seat, allowing pressure to enter through equalizing ports. Then, as additional hydraulic pressure is applied to the piston, it continues downward movement, pushing the flapper open. The flapper hinge assembly is designed such that the force on the piston is not applied directly on the hinge pin. Upon loss of hydraulic pressure in the control line, the valve’s large spring serves to lift the hydrostatic head of the control fluid. The flapper spring is designed to close the valve when the piston moves up past the flapper. Opening Prong Nose Seal The FXE valve uses the valve housing as the downstop for the opening prong. This metal-to-metal (MTM) interface is designed to prevent flow from passing between the valve housing and the opening prong. The MTM interface isolates the flapper and seat from fluid flow while the valve is open. This design creates an MTM interface with the full force exerted by the hydraulic piston, minus the spring compression force, holding the two metal faces in contact. Radius of Curvature at Flow Entrance Halliburton conducted a study with various curvatures on the entrance to the valve. The study tested abrasive fluids flowing through different test subs and examined the resulting wear patterns. As a result, an optimum radius of curvature was determined and implemented on the valve housings of all wireline-retrievable safety valves. Applications » General production completions Features » Equalizing-type flapper closure » Solid construction flapper made from bar stock » Spherical radius seat on flapper improves seal reliability » Sealing and seating surfaces are out of the well production flow path when valve is in the open position *information referenced from supplier catalog.

Introducing Poseidon Robotics' Large Aluminum Jaws: Elevating Subsea Search and Rescue Operations Poseidon Robotics, a leading name in subsea robotics and ROV solutions, is proud to announce the launch of our latest innovation: the Large Aluminum Jaws. Designed to enhance the performance of the renowned Blue Robotics Newton Subsea Gripper, these jaws are set to revolutionize search and rescue (SAR) applications and beyond. A Collaborative Breakthrough At Poseidon Robotics, collaboration and customer-centricity lie at the core of our values. We have worked closely with our esteemed partners at Blue Link and engaged with several SAR customers to develop the Large Aluminum Jaws. This joint effort ensures that our product aligns perfectly with the unique needs and challenges faced by search and rescue operators in subsea environments. Engineered for Performance The Large Aluminum Jaws have been meticulously engineered to deliver superior performance in grabbing larger objects underwater. Comparing our Aluminum model to the standard jaws, it becomes evident that we have achieved the perfect balance between strength, precision, and functionality. Precision and Durability Crafted from premium quality Aluminum (6061-T6), our jaws boast exceptional strength and durability. The hard anodized black finish further enhances their resilience, making them resilient to the harsh conditions of subsea operations. Precision flanged bushings ensure smooth and reliable operation, enabling operators to accomplish their tasks with confidence. Versatility Redefined While the Large Aluminum Jaws are designed primarily with search and rescue applications in mind, their versatility extends to various other tasks in subsea environments. Whether it's retrieving objects from the depths or handling delicate operations, these jaws offer unmatched adaptability and efficiency. Your Partner in Subsea Excellence When you choose Poseidon Robotics' Large Aluminum Jaws, you partner with a team dedicated to excellence and customer success. Our commitment to providing the highest quality products is matched only by our dedication to unparalleled customer support. We are here to ensure that you make the most of your subsea operations with our cutting-edge solutions. Experience the Future of Subsea Grabbing Unlock a new era of efficiency and precision in search and rescue operations with Poseidon Robotics' Large Aluminum Jaws. Whether you are a SAR professional or involved in other subsea applications, these jaws will elevate your performance to new heights. Contact Us Today Contact Poseidon Robotics today to learn more about our Large Aluminum Jaws and explore how they can transform your subsea operations. Our team of experts is ready to assist you every step of the way. Embrace the future of subsea robotics with Poseidon Robotics!

Transforming Businesses Through Data Strategy Consulting: Unlock Your Data's Full Potential In today's data-driven world, businesses thrive by harnessing the power of data. But how do you navigate this landscape to make smart decisions that drive success? Enter ELEKS' Data Strategy Consulting – a comprehensive solution that combines design, implementation, and provisioning support to help you harness the full potential of your data. Empowering Data-Driven Success: Harness Data for Informed Decisions: Our expert data team lays the groundwork for effective data analysis. Gain insights into customer behaviors, scenarios, and value points, allowing you to make well-informed decisions that add real value. Enhance Operational Efficiency: Say goodbye to duplicated workloads. Our data strategy consultants streamline data management processes across your organization, freeing up your team to focus on your core business. Create New Revenue Streams: Monetize your data to tap into new revenue opportunities. Embed data into your products, services, or even sell it to your customers. This not only enhances customer experience but also boosts brand loyalty and drives sales. Ensure Compliance and Security: Data privacy and security are paramount. Our consultants meticulously plan enterprise data management projects, ensuring data safety through provisioned access and auditing. Streamline Cross-Department Collaboration: Facilitate collaboration between departments by defining clear processes and data management rules. Enhance access to data, fostering collaboration and maintaining peak performance. Navigating Data Strategy Success: Designing Data Strategy: 1. AS-IS Analysis: Our data strategy journey starts by assessing your current data landscape. We identify components, users, and potential limitations, evaluating data processes' maturity, security standards, and more. 2. TO-BE Analysis: Crystalize your future digital strategy. Define success criteria and objectives, merging data analytics with business goals to determine achievable milestones and ambitious targets. 3. Transition Planning: Prioritize value vs. complexity and create a tailored roadmap. Develop a blueprint that includes timelines, milestones, resources, and metrics, while assessing dependencies and risks. Executing Data Strategy: End-to-End Guidance: Our experts support your strategy's implementation, drawing from a pool of skilled engineers and data scientists. We ensure your project aligns with your company's needs. Implementation Support: Seamlessly roll out your data strategy company-wide. We monitor progress using pre-defined metrics and KPIs to ensure successful deployment. Key Deliverables of Enterprise Data Strategy: Our comprehensive approach includes assessing existing practices, decision-making processes, and data architecture. The result? A detailed plan that incorporates performance targets and strategies for moving forward. Why Choose ELEKS for Your Data Strategy: End-to-End Support: ELEKS provides comprehensive support, from design to implementation. Our data strategy consultants offer the full spectrum of services to help you achieve your goals seamlessly. Specialist Expertise: Gain insights from award-winning specialists in domains like data science, DevOps, and cybersecurity. We tailor solutions to your unique needs, ensuring total confidence in your data strategy. Scalable Platforms for Automation: Data Science Platform (eDSP): Our proprietary platform streamlines the design and management of machine learning models. eDSP, based on Kubernetes, enables rapid delivery of data analytical initiatives and significant cost savings. Compliance Automation Platform: Automate compliance efforts in regulated sectors, reducing costs and managing changes in regulations with ease. Seamless integration via RESTful API ensures effortless adoption. ELEKS: Your Partner in Data Transformation: In a world driven by data, ELEKS' Data Strategy Consulting unlocks limitless possibilities. Make informed decisions, enhance efficiency, and create new revenue streams with confidence. Embrace the power of data-driven success today – because your data's potential is boundless.

Introducing Safe-T-Whip Anchor HD (SW-A-HD-01): Your Ultimate Heavy-Duty Anchor for Unparalleled Safety and Reliability At Safe-T-Whip & Restraints Inc., safety is not just a word; it's our commitment. We are excited to unveil our latest innovation - the SW-A-HD-01 Safe-T-Whip Anchor HD. Designed for heavy-duty applications, this anchor is engineered to provide unmatched safety and reliability for flowline restraint in the most demanding oilfield environments. Unrivaled Heavy-Duty Design: Identified by its bold red color and complemented by an orange tag, SW-A-HD-01 Safe-T-Whip Anchor HD is expertly crafted from robust 3/4" 12-Strand HMPE fiber, earning its reputation as a "Heavy Duty" (HD) anchor. This formidable anchor is purpose-built for use on 3-inch 1502 hammer union pipelines up to an impressive 15,000psi or 4-inch iron up to 10,000psi. When it comes to anchoring high-pressure flowlines securely, trust Safe-T-Whip Anchor HD-01 to deliver unparalleled performance. Unmatched Performance, Unyielding Safety: Safe-T-Whip Anchor HD-01 is designed to withstand the toughest challenges the oilfield can present. Its heavy-duty construction guarantees maximum reliability and protection, ensuring your team's safety is never compromised. The high strength of 3/4" 12-Strand HMPE fiber ensures that it stands strong against the forces at play in your operations. Anchoring for Unmatched Safety: When anchoring is required for flowline restraint, Safe-T-Whip Anchor HD-01 is the epitome of safety. Its sturdy and dependable design offers the highest level of protection for your team and equipment, giving you peace of mind in even the most demanding situations. Designed for Extreme Conditions: The Canadian oil patch presents unique challenges and demanding drilling environments. Safe-T-Whip Anchor HD-01 is engineered to thrive in these extreme conditions. Its ability to resist pressure hosing and imperviousness to corrosion, oil spills, and most chemicals ensure it remains effective and reliable, no matter the conditions. Certified and Tested for Quality: Your safety is our priority, and that's why every Safe-T-Whip Anchor HD-01 undergoes rigorous testing to meet the highest industry standards. Our commitment to quality and excellence ensures that you receive a safety anchor you can trust. Your Partner in Safety: When it comes to heavy-duty anchoring for flowline restraint, Safe-T-Whip & Restraints Inc. is your reliable partner. Invest in SW-A-HD-01 Safe-T-Whip Anchor HD to safeguard your workforce, equipment, and operations, ensuring compliance with safety regulations and providing peace of mind. Take Anchoring to the Next Level: Safe-T-Whip Anchor HD-01 is the ultimate heavy-duty anchor for unmatched safety and reliability. Trust in the power of Safe-T-Whip Anchor HD to keep your operations secure in high-pressure environments. With Safe-T-Whip & Restraints Inc., your safety is always anchored.

InWaTec Combined: Ensuring Well Integrity with Advanced Pulling and Setting SCSSV Services The oil and gas industry faces the critical challenge of maintaining well integrity for uninterrupted production. At InWaTec Combined, we understand the importance of robust well operations, and our Pulling and Setting Surface Controlled Subsurface Safety Valve (SCSSV) services are at the forefront of addressing this challenge. Revolutionizing DHSV Repair A malfunctioning Downhole Safety Valve (DHSV) can halt production and compromise well integrity, making timely and efficient repairs crucial. Our services are meticulously designed to repair Tubing Retrievable Subsurface Safety Valves (TRSSSV), a process that not only restores well integrity but also resumes production swiftly. By repairing TRSSSVs, we circumvent the need for lock open operations, avoiding the necessity of installing a Wireline Retrievable Subsurface Safety Valve (WRSSSV) which could potentially restrict production flow. Optimized Repair Techniques Conventional repair methods are often time-consuming and costly, requiring extensive workover operations. InWaTec Combined’s approach replaces these outdated methods with cutting-edge techniques that save time and reduce costs. Our expertise in pulling and setting SCSSVs ensures that if a TRSSSV's functionality and integrity cannot be restored, it can be locked open efficiently. We then install a WRSSSV, which is a strategic move that prevents the need for a complex workover, thereby optimizing the repair process. Maintaining Peak Performance The ability to swiftly switch from a TRSSSV to a WRSSSV without a full workover is a game-changer in well service operations. It minimizes downtime and ensures that wells can continue to operate at peak performance levels. Our dedicated teams are equipped with the latest technology and have the expertise to execute these operations seamlessly, ensuring minimal disruption to your production schedules. A Partner in Well Integrity At InWaTec Combined, we pride ourselves on being your trusted partner in maintaining well integrity. Our Pulling and Setting SCSSV services are not just about repairs; they are about providing a comprehensive solution that safeguards your operations against future integrity issues. With our advanced techniques and committed service, we guarantee that your wells remain productive, secure, and profitable. In conclusion, InWaTec Combined is dedicated to providing superior service in the repair and maintenance of SCSSVs. Our innovative approach is designed to keep your wells functioning smoothly, ensuring that well integrity is not just restored but fortified. Trust us to be the guardians of your well's safety and productivity.

KEY360 Inc offers a single integrated Business Management Platform comprising Business Intelligence, Project Management, Big Data & Analytics, ERP, Behaviour and Strategy Modification. - Over 140 Business and Project Management Systems on one platform available - Unique and extremely effective workflow engine - Remarkable “BIG DATA” and bulk transaction capability - Integrated Real Time reporting and dashboarding - Multi-company platform allows all project users to integrate seamlessly KEY Differentiators: - KEY360 Provides an exceptional opportunity for your organisation to attract new clients and build long terms relationships. - KEY360 is a Microsoft Gold Partner and Approved Microsoft Co-Sell Partner and can be purchased directly from the below online marketplaces: - Microsoft AppSource: KEY360 Capital Management Projects - Azure Marketplace: KEY360 Capital Management Projects - KEY360 is reputedly the most comprehensive and versatile Capital Project Management, Business Digitalization & Business Optimization solution available.

ELEKS: Transforming Energy Excellence with Cloud-First Strategies In the dynamic realm of the energy sector, innovation isn't a luxury – it's a necessity. ELEKS takes the lead, harnessing our unparalleled energy sector technology expertise to redefine the way you manage energy and utilities. With our cutting-edge cloud-first strategies, we're here to propel your operations to new heights of efficiency, cost-effectiveness, and security. Here's how ELEKS can be your catalyst for an energy future that's smarter, more connected, and infinitely more agile: Tailored Cloud-First Strategies: Your organisation is unique, and so are our strategies. ELEKS expertly tailors cloud-first approaches to fit your specific needs, unlocking unparalleled potential for your energy operations. Performance Optimization: Elevate your performance benchmarks with cloud-first strategies. Our solutions optimize the performance of your software systems, ensuring they operate at their peak efficiency. Cost-Effectiveness Amplified: Say goodbye to bloated budgets. Our cloud-first strategies enhance cost-effectiveness, helping you allocate resources efficiently and maximize the return on your technology investments. Resilience Reinvented: Your operations require robustness. ELEKS' cloud-first strategies bolster the resilience of your systems, ensuring seamless operations even in the face of challenges. Data Security Elevated: Data security is non-negotiable. With our cloud-first strategies, safeguarding your data becomes paramount, protecting your valuable assets from any potential threats. Big Data Unleashed: Embrace the power of Big Data with ELEKS. Our cloud migration services enable you to harness Big Data's potential, enhancing customer satisfaction through real-time analytics on energy consumption. Real-Time Customer Insights: Elevate your customer experience game. Our solutions empower you to provide end-users with real-time insights into their energy consumption, fostering satisfaction and engagement. Advanced Data Analytics: Data is your ally. Our team of custom software development experts implements cloud-based solutions infused with advanced data analytics, turning raw information into actionable insights. ML-Driven Precision: Embrace the future of energy management. Our solutions feature Machine Learning (ML) capabilities, enabling predictive maintenance and driving the precision of your energy systems. ELEKS: For an Agile Energy Future ELEKS isn't just a service provider – we're your innovation partner. Our energy sector technology expertise doesn't just promise solutions; it delivers transformation. With ELEKS, you're not just adopting cloud-first strategies – you're embracing an energy future that's agile, connected, and limitless. Join us in scripting a new energy narrative where innovation meets precision, cost-effectiveness is a norm, and security is paramount. With ELEKS, you're stepping into a realm where technology-driven solutions redefine energy excellence and operational aspirations become reality. Embrace a future where cloud-first strategies power your energy journey, and efficiency is at the heart of every operation.

Enhancing Construction with Smart Compactor Leasing from CWB National Leasing Propel Your Construction Business with Strategic Equipment Leasing As a business owner in the construction industry, obtaining the right equipment is pivotal for your success. One such essential tool is a compactor, and leasing it through Canadian Western Bank (CWB) National Leasing offers numerous advantages. Here's how leasing a compactor can benefit your construction business: 1. Rapid Equipment Access With CWB National Leasing, the process of leasing a compactor is swift and efficient. Following a quick review of your application, typically within 48 hours, CWB National Leasing will notify your equipment dealer that payment is underway. This expedited process means your compactor will be on your site and operational in no time. 2. Increased Purchasing Power Leasing a compactor through CWB National Leasing empowers you with greater buying power. Opt for periodic payments instead of a hefty one-time purchase, freeing up capital for other vital business needs. Plus, you have the option to enhance your compactor with additional features or accessories for a slight increase in your payment. 3. Cash Flow Management Manage your finances more effectively with smaller, regular lease payments. This approach means your new compactor starts contributing to your revenue even as you pay for it, facilitating a balanced expense-to-revenue ratio. 4. Flexible Payment Structures Recognizing the diverse nature of construction businesses, CWB National Leasing offers various payment options including seasonal, semi-annual, or annual plans. This flexibility allows you to match payments with your business's cash flow. 5. Potential Tax Advantages Leasing can provide significant tax benefits by allowing lease payments to be expensed, rather than capitalizing the cost of the compactor. Consult with your tax advisor to understand how leasing can favorably impact your business's tax position. 6. Customized Payment Plans CWB National Leasing tailors leases to align with your unique business needs and cash flow patterns, ensuring that the payment schedule fits your business model perfectly. 7. Various Buyout Options At the end of your lease, you can choose from several buyout options, ranging from a nominal amount to 50% of the total equipment cost. This flexibility can lead to eventual ownership of your compactor. 8. Fair Market Value and Adaptive Payment Options Defer a portion of your compactor’s cost to the lease's end, with the option to purchase at fair market value or upgrade. The step-up or step-down payment options also allow for adjustments based on changing cash flow needs. 9. Ideal for Seasonal Revenue For businesses with seasonal income, such as certain construction projects, CWB National Leasing offers payment schedules that align with your business’s revenue cycle, like a six-month-on, six-month-off plan. Conclusion Choosing to lease your compactor through CWB National Leasing is more than just an equipment acquisition; it’s a strategic decision that enhances your business's operational capacity while maintaining financial flexibility. It enables you to deploy state-of-the-art compactors in your projects while managing your finances smartly, paving the way for growth and profitability in the competitive construction industry.

Amplifying Control Room Capabilities through Robust Wireless Links by Nulux Network Solutions In the thriving pulse of the oil and gas industry, where operational precision and data integrity are pivotal, control rooms emerge as the neural centers orchestrating myriad operations with absolute finesse. At Nulux Network Solutions, we understand the paramount importance of seamless, secure, and robust communication for control rooms, ensuring that your operational harmony remains undisturbed amidst the cacophony of challenges posed by distance, terrain, and environmental factors. Nulux’s Control Room Wireless Links – Ensuring Uninterrupted Operative Symphonies Navigating through the technological and operational challenges, Nulux’s Control Room Wireless Links ensure that your data – the critical nerve of decision-making processes – travels seamlessly across the challenging terrains and distances, bridging your control room with the various operational nodes dispersed across diverse geographic locales. Wireless Connectivity – The Nulux Difference Our wireless solutions are meticulously crafted, ensuring: Seamless Connectivity: Bridging the communication gaps through point-to-point and multipoint configurations, tailored to meet your unique operational dynamics and challenges. Enhanced Reliability: With proven expertise in implementing robust wireless systems, we ensure that your control room is always in sync with the on-field operations, mitigating downtimes and enhancing decision-making processes. Optimized Cost-Effectiveness: Deploying wireless links that negate the need for extensive hardwired infrastructures, thereby ensuring that your operational efficiencies are not burdened by exorbitant capital expenditures. Intricate Comprehension of Wireless Technologies At Nulux, we prioritize understanding the subtle nuances and stark distinctions in wireless technologies, ensuring that your control room wireless links are not just communicatively optimal but are also operationally coherent. Point-to-Point Networks: Ensuring a dedicated, secure, and high-capacity data transmission channel between your control room and a fixed operational point. Multipoint Configurations: Crafting a network where the control room can communicate with multiple operational points through a single, secure, and reliable wireless channel. Safeguarding Your Data with Nulux In a world where data integrity and security are not mere necessities but vital operational prerequisites, our Control Room Wireless Links are fortified with robust security protocols, ensuring that your operational data is shielded from potential cyber threats, thereby facilitating a secure, reliable, and efficient operative environment. Engage with Operational Excellence Embark on a journey towards enhanced operational efficiencies with Nulux, where your control room is not just a strategic point but is the dynamic conductor of an orchestrated operational symphony. Our wireless links ensure that every note, every data point, is communicated, analyzed, and acted upon with absolute precision, ensuring that your operations resonate with reliability, efficiency, and absolute excellence. Unleash the true potential of your control room, ensuring that every decision, every action is backed by real-time data, secured communication, and the robust reliability of Nulux’s Control Room Wireless Links. Let’s sculpt an operational future where your decisions echo across the vast expanses of your operations, where your actions are timely, and where your control room truly controls, manages, and orchestrates your operational symphony with unmatched precision and reliability. Navigate with Nulux, where your pathways are not just connected but are securely, reliably, and efficiently interlinked.

The WI retrievable injection valve is a high-performance, high-flow rate injection valve. High throughput is achieved by a unique valve configuration that minimizes turbulent and potentially erosive flow. Operation is not dependent on a specific flow rate, pressure, or setting depth, thus negating the need for adjustment over time. The valve incorporates a metal-to-metal valve and seat energized by the combination of an integral spring and well pressure acting from below. The WI injection valve can be deployed on a wireline lock or through-tubing pack-off device, providing flexibility not available with alternative injection valve systems. As a result of the simple design with fewer parts, redress and repair costs are considerably lower than those for other injection valve systems. Applications The WI injection valve is primarily used in water injection applications as an alternative to conventional tubing or wireline-set safety valves. The valve is also commonly used as a retrofit solution in water injectors in which a tubing to annulus leak has occurred. The valve can be deployed below the leak point to eliminate uncontrolled annulus pressure increases when the injection stops. Features » Compatible with all known lock systems » Dedicated designs to suit Halliburton EB0 intervention packers » Enhanced internal flow profile » Simple design and construction » Flow-loop testing performed to establish pressure drop versus pump rate *information referenced from supplier catalog.

Enhance Your Fabrication Capabilities with Pipe Bender Leasing from CWB National Leasing Streamlining Your Operations with Cost-Effective and Flexible Equipment Solutions For businesses in the plumbing, HVAC, automotive, or construction industries, precision in pipe bending is crucial for efficient operations and quality workmanship. Leasing pipe benders through Canadian Western Bank (CWB) National Leasing offers a flexible, cost-effective, and practical solution for businesses seeking to enhance their pipe fabrication capabilities. Here’s how leasing pipe benders can benefit your business: 1. Rapid Access to Advanced Fabrication Equipment CWB National Leasing understands the importance of having the right tools for your trade. They offer a quick leasing process, with decisions typically made within 48 hours of your application. This ensures that your pipe benders can be delivered and operational swiftly, enhancing your production efficiency and reducing downtime. 2. Increased Financial Flexibility Leasing pipe benders with CWB National Leasing boosts your buying power. It allows you to spread costs over manageable periodic payments rather than a significant initial purchase, freeing up capital for other vital business operations. The option to add extra features or accessories to your pipe benders for a small payment increase enables customization to meet specific project requirements. 3. Effective Cash Flow Management Manageable lease payments over the term mean your pipe benders start contributing to your business’s revenue while they're being paid off. This balanced approach helps maintain a healthy expense-to-revenue ratio, essential for business growth and financial stability. 4. Customizable Payment Plans CWB National Leasing offers a variety of payment options, including seasonal, semi-annual, or annual plans, tailored to your business’s financial cycle. This flexibility is particularly beneficial for businesses with seasonal fluctuations in income, ensuring that payments are practical and fit your financial situation. 5. Potential Tax Benefits Leasing pipe benders can offer tax advantages, such as the ability to expense lease payments instead of capitalizing the cost of the equipment. Consulting with a tax advisor is advisable to understand how leasing can optimize your business’s tax position. Conclusion Choosing to lease pipe benders through CWB National Leasing is a strategic decision that equips your business with essential fabrication equipment while maintaining financial flexibility. It ensures access to high-quality pipe benders, vital for precise and efficient pipe fabrication, without the financial burden of a large upfront investment. This leasing approach enables enhanced operational efficiency, improved project quality, and increased profitability, helping your business to excel in its respective industry.

KEY360 Inc offers a single integrated Business Management Platform comprising Business Intelligence, Project Management, Big Data & Analytics, ERP, Behaviour and Strategy Modification. - Over 140 Business and Project Management Systems on one platform available - Unique and extremely effective workflow engine - Remarkable “BIG DATA” and bulk transaction capability - Integrated Real Time reporting and dashboarding - Multi-company platform allows all project users to integrate seamlessly KEY Differentiators: - KEY360 Provides an exceptional opportunity for your organisation to attract new clients and build long terms relationships. - KEY360 is a Microsoft Gold Partner and Approved Microsoft Co-Sell Partner and can be purchased directly from the below online marketplaces: - Microsoft AppSource: KEY360 Capital Management Projects - Azure Marketplace: KEY360 Capital Management Projects - KEY360 is reputedly the most comprehensive and versatile Capital Project Management, Business Digitalization & Business Optimization solution available.

Mobile cranes can be used to access narrow passages and navigate project sites that have limited space, making them a practical solution for many industries, site conditions, and materials. Let us help manage your crane and material handling requirements for your project.

Introducing the Multiprocess 231 SLM: Your Ultimate Welding Powerhouse for the Oil and Gas Industry Are you seeking a welding machine that can do it all? Look no further than the Multiprocess 231 SLM by Canaweld. Our multi-process welding machines are the all-in-one solution you've been searching for, capable of handling MIG welding, MIG Brazing, Flux Cored welding, Flux Cored Gas Less welding, TIG welding, and Stick welding with ease. Unleash the Power of Versatility At Canaweld, we take pride in offering a wide range of multi-process welders to cater to your specific needs. Whether you require an industrial heavy-duty model, a high-tech, programmable welder with an LCD panel, or a portable unit, our production lines have got you covered. Our multi-process welders handle a variety of materials, from mild steel, stainless steel, and aluminum (with or without a spool gun) to chrome molybdenum, titanium, and copper alloys. Empowering Your Welding Journey The Multiprocess 231 SLM represents the pinnacle of welding innovation. This high-tech, synergetic, powerful, and portable inverter welder is equipped with an LCD panel and a convenient saving program facility. Its unmatched capabilities allow for Stick welding, MIG welding, Flux cored welding, and TIG welding with lift start in manual or synergic mode. Experience the perfect balance of simplicity and precision with synergic control and job programming, making it ideal for welders of all experience levels. Save time and costs on machine setup as the LCD display walks you through the process step by step, automatically adjusting parameters to meet your specific needs. It's like having your own personal welding expert right beside you! Adaptable to Your Work Environment The Multiprocess 231 SLM is designed to accommodate your work environment, featuring selectable voltage options of 230 V (±15%) or 115 V (±15%). It doesn't matter where your welding projects take you; this versatile machine adapts seamlessly to any single voltage electrical network. From novice welders to professional production welders, this unit is the ultimate choice for those who demand speed and exceptional quality. Built for Excellence Experience unrivaled welding performance with Canaweld's spool gun compatibility, ensuring trouble-free Aluminum MIG welding. The machine's robust, professional, and heavy-duty wire-feeding mechanisms guarantee smooth and reliable wire feeding, while the 'Energy Saving' function optimizes power source cooling fan operation for efficient energy usage. Total Control at Your Fingertips The Multiprocess 231 SLM puts you in control with its array of adjustable parameters. From voltage, wire speed, wave form, and burn back in the MIG process to material, wire diameter, gas, 2T/4T in MIG, and current, down slope, and post gas in TIG, this welder empowers you to achieve flawless welding results, no matter the project. Designed for Endurance Tested to withstand the toughest conditions, the Multiprocess 231 SLM is built to excel even in extreme heat of 104°F/40°C. Its metal face panel adds to its durability, ensuring it can handle any challenging environment. Our Commitment to Quality At Canaweld, we stand by the quality and reliability of our products. That's why the Multiprocess 231 SLM comes with a comprehensive 3-year warranty, providing you with peace of mind. Discover the Future of Welding Elevate your welding projects to new heights of efficiency and excellence with the Multiprocess 231 SLM by Canaweld. Embrace the power of versatility, precision, and control. Don't settle for ordinary; choose the welding powerhouse trusted by professionals in the oil and gas industry. Experience the Multiprocess 231 SLM for yourself. Invest in the welding machine of tomorrow, backed by Canaweld's dedication to innovation, quality, and customer satisfaction. Unleash your welding potential with the Multiprocess 231 SLM by Canaweld.

Storm Choke® K safety valves are ambient-type, wireline retrievable valves with the largest flow area of all direct controlled safety valves on the market. They are ideally suited for high-volume, low-pressure wells. These valves are normally closed and pre-charged with a set dome pressure. When the well flowing pressure drops below the predetermined dome-pressure charge because of a rupture in flowline or surface equipment, the dome pressure and main valve spring close the valve, shutting in the well below the earth’s surface. This valve contains a detent mechanism to provide a positive snap-action closure at the predetermined disaster rate of the valve. Its bore is not restricted by a flow bean. The valve is designed to resist pressure surges. A metal-to-metal poppet valve and seat comprise the valve’s primary closure mechanism. The K valve is ideal for protecting wells with declining bottomhole pressure. This valve closes in situations where a pressure decline would not activate a valve with a flow bean. To reopen the valve, the operator must fully equalize pressure either by applying pressure in the tubing from the surface or by an equalizing prong. The valve will reopen when the tubing pressure acting on the internal piston area overcomes the dome charge. Applications » Wells with declining bottomhole pressure » High-volume, low-pressure wells » Wells with no provisions for surface-controlled valves Features » Poppet closure » Large ports with capacity for high-volume wells » Designed to resist pressure surges *description excerpted from manufacturers catalogue.

The SP™ tubing-retrievable safety valve (TRSV) is a single rod-piston non-elastomer flapper valve designed for hostile environments and extended life applications where ultimate reliability is required. Potential leak paths within the valve are minimized with the single rod-piston design. The piston achieves a metal-to-metal (MTM) seal at its uppermost and lowermost positions to seal well pressure from the control system. The SP valves incorporate flappers using spherical radius sealing surfaces that help greatly improve seal reliability. The spherical radius design provides full MTM sealing integrity. For applications where either the OD or ID is restrained, SP valves incorporate a contoured flapper. OD/ID relationships are improved by the contoured flapper design, which helps provide superior MTM sealing when compared to other forms of curved flapper technology. Applications » For applications requiring ultimate reliability and longevity, such as high-temperature/high-pressure, and subsea completions, or hostile well environments Features » Non-elastomer dynamic piston seals » MTM static seal at upper and lower piston positions » MTM body joints » Flow tube fluted guide » 100% MTM flapper » Concentric thrust bearing » Wiper ring on upper flow tube » Cleanout ports in flow tube’s upper end » Internal exercise profile » Flow tube shock absorber » MTM face seat at flow tube downstop » Setting depths to 9,000 ft (2743 m) » Critical components isolated from well debris with valve in open position » Area above flow tube free of solids buildup » Flow tube can be manipulated by slickline » Protected from high flow rate slam closures *information referenced from supplier catalog.

Superior Cleaning Power Our 4-liter EnviroBlu cleaning solution is engineered to tackle the toughest industrial grime, delivering unparalleled cleaning performance. Perfect for maintaining clean, safe, and efficient workplaces, EnviroBlu is your go-to solution for industrial environments. Eco-Friendly Formula Committed to sustainability, EnviroBlu's eco-friendly formula ensures that while you achieve peak cleaning efficiency, the impact on the environment is minimized. Ideal for industries aiming to maintain environmental responsibility alongside operational excellence. Diverse Uses Whether you're cleaning heavy machinery, warehouse floors, or complex equipment, EnviroBlu's potent formulation is designed to handle diverse industrial cleaning needs. This 4-liter size offers convenience and sufficient volume for extensive cleaning tasks, ensuring thorough coverage and effectiveness. Environmental EnviroBlu provides top-notch, environmentally safe cleaning and degreasing products. Emphasizing their commitment to sustainability, all EnviroBlu products are water-based, non-toxic, and phosphate-free. This makes them not only safe for various industrial, commercial, and residential applications but also gentle on the environment. The formulation is designed to deliver efficient cleaning without compromising ecological integrity. EnviroBlu's ongoing mission is to help industries reduce their carbon footprint and environmental impact through innovative cleaning solutions, aligning with initiatives like the Green Marine program to further environmental excellence. Boost your industrial cleaning standards with EnviroBlu. Available in a 4-liter package, it's ready to tackle your most challenging cleaning jobs.

Boost Your Business Efficiency with Blower Leasing from CWB National Leasing Streamlining Operations with Flexible and Cost-Effective Equipment Solutions For businesses that require the use of blowers – whether for landscaping, construction, or industrial purposes – having reliable and efficient equipment is key to maintaining productivity. Leasing blowers through Canadian Western Bank (CWB) National Leasing provides an advantageous and financially savvy solution. Here’s how leasing blowers can benefit your business: 1. Rapid Equipment Acquisition CWB National Leasing prioritizes your business needs with a swift leasing process. Decisions are typically made within 48 hours of your application, ensuring that payment is promptly processed. This efficiency means your blowers can be delivered and operational quickly, reducing downtime and enhancing your operational capacity. 2. Enhanced Financial Flexibility Leasing blowers with CWB National Leasing boosts your buying power. By opting for periodic payments over a substantial initial purchase, you can free up capital for other crucial business areas. Additionally, the option to add extra features or accessories to your blowers for a small payment increase allows for customization to meet your specific needs. 3. Balanced Cash Flow Management Smaller lease payments over the term mean that your blowers start contributing to your business’s revenue while they are being paid off. This approach is essential in maintaining a healthy balance between expenses and income, fostering long-term business stability and growth. 4. Flexible Payment Options CWB National Leasing offers a range of payment plans, including seasonal, semi-annual, or annual options, to align with your business’s revenue cycle. This flexibility is especially beneficial for businesses with variable or seasonal income, ensuring that payments are manageable and aligned with your financial capacity. 5. Potential Tax Benefits Leasing blowers can offer tax advantages, such as the ability to expense lease payments instead of capitalizing the cost of the equipment. Consulting with a tax advisor is recommended to understand how leasing can positively impact your business’s tax situation. Conclusion Opting to lease blowers through CWB National Leasing is a strategic decision that equips your business with essential equipment while maintaining financial agility. It ensures access to high-quality blowers, vital for efficient operations, without the financial burden of a large upfront investment. This leasing approach paves the way for enhanced operational capabilities, business expansion, and increased profitability.

Introducing the NIU ROV: Your Ultimate Pipe Inspection Solution Poseidon Robotics is thrilled to unveil the latest addition to our fleet of advanced subsea robotics: The NIU ROV - The Pipe Inspection Remote Operated Vehicle. Engineered to excel in pipe and tunnel inspections, the NIU ROV sets new standards for versatility, precision, and efficiency in the subsea industry. Unleash the Power of NIU ROV The NIU ROV is purpose-built to navigate the intricate and challenging environments of pipes and tunnels. With its compact design, this remarkable ROV can effortlessly maneuver through a 12-inch diameter pipe, providing unparalleled access to previously hard-to-reach areas. From industrial pipelines to underwater tunnels, the NIU ROV is your go-to solution for comprehensive inspections. Unparalleled Performance The NIU ROV is equipped with state-of-the-art technology and robust features that ensure exceptional performance in every operation. Its advanced thrusters enable precise movement and control, allowing operators to conduct inspections with utmost accuracy. The powerful onboard lighting system ensures crystal-clear visibility even in the darkest and murkiest conditions. Efficiency Redefined At Poseidon Robotics, we understand the value of time and efficiency in subsea operations. The NIU ROV is designed to streamline your inspection processes, significantly reducing downtime and operational costs. Its ease of deployment and user-friendly interface enable quick setup and seamless integration into your inspection workflows. Tailored for Pipe and Tunnel Inspections Unlike generic ROVs, the NIU ROV is engineered specifically for the unique challenges of pipe and tunnel inspections. Its rugged construction and protective measures safeguard it from potential hazards encountered in these confined environments. With the NIU ROV, you can confidently conduct inspections with minimal risk and maximum efficiency. Cutting-Edge Technology The NIU ROV incorporates cutting-edge technology, including high-resolution cameras, to provide a comprehensive view of the inspection area. Its real-time data transmission capabilities allow operators to monitor and analyze data on the surface, making informed decisions on the spot. Unlock New Possibilities with NIU ROV From oil and gas pipelines to municipal infrastructure, the NIU ROV opens up a world of possibilities for inspecting critical subsea assets. Its adaptability and versatility make it an indispensable tool for various industries, including energy, construction, engineering, and more. Partner with Poseidon Robotics When you choose the NIU ROV from Poseidon Robotics, you not only invest in a top-of-the-line inspection solution but also gain access to our unmatched expertise and support. Our team of subsea specialists is ready to assist you every step of the way, ensuring that you harness the full potential of our advanced ROV technology. Embark on a New Era of Pipe Inspections Step into the future of subsea inspections with the NIU ROV - The Pipe Inspection Remote Operated Vehicle. Experience unparalleled performance, efficiency, and precision in your pipe and tunnel inspections. Contact Poseidon Robotics today to explore how the NIU ROV can revolutionize your subsea operations. Your success is our mission!

Flange connections are one of the best options for pipe end connections that have bends that are subjected to very high lateral forces inclined to cause the loosening of the assembly. Flanges are used instead of welded connections to facilitate maintenance operations (a flanged joint can be dismantled quickly and conveniently). Upgrading threaded connections to flanged connections increases reliability and integrity while maintaining operational flexibility.