Custom buoyancy options for color, depth rating, and covering area

The electrical submersible pump is an efficient and reliable artificial-lift method for lifting moderate to high volumes of fluids from wellbores with volumes rates from 150 B/D to as much as 150,000 B/D (24 to 24,600 m3/d). A complete ESP system can be designed and supplied to meet the requirements from individual wells. The ESP system is comprised of; intake, pump, motor, seal section, cable, feed-through, surface electrical and any sensors, software and variable frequency drives (VFD's). ESP's can be used onshore, offshore, subsea, or in relatively high gas saturations.

The manufacturer has applied the same stringent testing used on its maximum reliability tubing-retrievable safety valves (TRSV) to its BigBore™ wireline-retrievable safety valve (WLRSV). This valve offers the durability and reliability of TRSVs through metal-to-metal (MTM) sealing of the contoured flapper, enhanced body connections, and debris isolation. The contoured flapper provides a large ID compared to other valve designs, while providing enhanced flapper sealing. Another significant feature of this valve is its ease of on-location servicing. The construction of the upper end of the valve provides for easy access to the valve’s external packing. Once the lock is removed, the packing retainer sleeve can be removed and serviced. The savings made possible by an enlarged ID, enhanced performance, and ease of service have made it an excellent choice for replacing equipment currently installed in existing completions. Applications » New completions » Replacement of existing WLRSVs to provide increased ID and reliability Features » MTM sealing contoured flapper closure with large ID » High-strength rod-piston actuation » Dual-sealing minimized body connections » Enhanced debris isolation through MTM interface of flow tube/bottom sub » Radius of curvature at flow entrance » Equalizing feature available » Designed for easy field servicing » Setting depths to 9,000 ft (2743 m) *information referenced from supplier catalog.

The FRN wireline-retrievable flapper valve, which is normally closed, is held open by hydraulic control pressure from the surface. The valve operates on a hydraulic-piston principle. To open, tubing pressure slightly higher than the well pressure below the closed flapper is applied. Once well pressure is equalized across the closed flapper, hydraulic pressure is applied to the piston, which pushes the flapper open. The flapper hinge assembly is designed so the force on the piston is not applied directly on the hinge pin. Upon loss of hydraulic pressure in the control line, the valve's large spring serves to lift the hydrostatic head of the control fluid. The flapper spring is designed to close the valve when the piston moves up past the flapper. Opening Prong Nose Seal The FRN valve uses the valve housing as the downstop for the opening prong. This metal-to-metal (MTM) interface is designed to prevent flow from passing between the valve housing and opening prong. The MTM interface isolates the flapper and seat from fluid flow while the valve is open. This design creates an MTM interface with the full force exerted by the hydraulic piston, minus the spring compression force, holding the two metal faces in contact. Radius of Curvature at Flow Entrance Halliburton conducted a study with various curvatures on the entrance to the valve. The study tested abrasive fluids flowing through different test subs and examined the resulting wear patterns. As a result, an optimum radius of curvature was determined and implemented on the valve housings of all wireline retrievable safety valves. Applications » New completions » Deep set » High pressure Features » High-strength rod-piston actuation » Non-equalizing flapper closure » Solid construction flapper made from bar stock » Spherical radius seat on flapper improves seal reliability » Sealing and seating surfaces are out of flow path of well production when valve is in open position » Designed for easy field servicing *information referenced from supplier catalog.

Houston Digital Instruments (HDI) is proud to present the HDI 3300 Temperature Gauge System, a state-of-the-art intrinsically safe, certified, solid-state electronic temperature gauge. Designed to meet the demanding requirements of industries such as high-pressure nitrogen pumping, geothermal drilling, mud-based drilling, bulk liquid storage, well control manifolds, and flare stacks, this gauge system delivers accurate and reliable temperature monitoring in even the harshest conditions. Unmatched Accuracy and Reliability: When it comes to temperature monitoring, precision is paramount. With the HDI 3300 Temperature Gauge System, you can trust in its exceptional accuracy and reliability. Built on our legacy of excellence, each gauge system offers an impressive 0.5% accuracy of full scale, ensuring that you receive precise and trustworthy temperature readings for your critical operations. Flexible Temperature Ranges and Resolutions: The HDI 3300 accommodates a wide range of temperature requirements, offering temperature ranges up to 150 degrees Celsius or 300 degrees Fahrenheit. Whether you're working in extreme heat or sub-zero environments, our gauge system provides accurate measurements tailored to your specific needs. With a resolution of 0.1 degrees, you can closely monitor temperature changes and respond promptly to any variations, maintaining control and efficiency in your operations. Versatile and Easy to Use: We understand that every application is unique, which is why the HDI 3300 Temperature Gauge System offers a range of configuration options to suit your requirements. Choose from 4-20mA or 0-1 volt output, allowing seamless integration with your existing monitoring systems. The solid-state platform eliminates the need for fluids or moving parts, reducing maintenance requirements and ensuring long-lasting performance. With a simple interface for calibration, you can easily verify and fine-tune temperature measurements to maintain the highest level of accuracy. Designed for Safety and Convenience: Safety is our utmost priority at HDI. The HDI 3300 Temperature Gauge System is intrinsically safe, certified to meet Class 1, Division 1, Groups A, B, C, and D standards by CSA. Additionally, an optional ATEX certification, II 1 G, Ex ia IIC T4, is available to meet the specific requirements of your industry. The battery-powered system provides flexibility and portability, allowing you to monitor temperatures even in remote locations. A low battery indicator ensures you are always aware of the battery status, preventing any interruptions in monitoring. Customize Your Monitoring Experience: At HDI, we understand that every customer has unique needs. The HDI 3300 Temperature Gauge System offers configuration options to tailor the system to your specific preferences. Choose from 4-20mA output, externally powered options, and backlight capabilities to optimize your monitoring experience. Secondary displays are also available, allowing you to extend visibility and control across multiple locations. Trust Houston Digital Instruments: For over 30 years, Houston Digital Instruments has been a leader in providing cutting-edge measurement and monitoring solutions to industries worldwide. Our commitment to safety, accuracy, reliability, and low maintenance shines through in every product we offer. The HDI 3300 Temperature Gauge System is a testament to our dedication to delivering the highest quality solutions that meet the evolving demands of our customers. Experience precise temperature monitoring with the HDI 3300 Temperature Gauge System. Contact our expert team today to discuss your specific requirements and discover how HDI can elevate your operations to new heights. Trust HDI for safety, accuracy, and reliability. Where Precision Meets Performance - HDI, your partner in temperature monitoring excellence.

Experience Unmatched Efficiency with Kessels ET-30 Single Stage Steam Turbine: Your Powerhouse for Precision In the world of industrial steam turbines, precision, reliability, and efficiency are non-negotiable. Kessels Steam Turbines is proud to introduce the ET-30 Single Stage Steam Turbine, a technological marvel that sets new standards in steam turbine excellence. Mastering Single Stage Steam Turbines Our Single Stage Steam Turbines are the embodiment of economy and reliability, serving as mechanical drives for Pumps, Fans, Knives, Compressors, and Generators. Over the past two decades, our engineering team has tirelessly reviewed customer and consultant requirements, meticulously addressing queries while adhering to the stringent standards of API 611 and 612. Unmatched Performance, Even at Low Pressure Kessels Steam Turbines have earned their stripes across diverse industries, renowned for their exceptional performance even under challenging low-pressure conditions. With over 15 frame sizes and design options, we offer Single Stage Steam Turbines capable of handling steam conditions and applications up to a staggering 4,000 HP in single-stage configurations. Industries Served Our Single Stage Steam Turbines find their utility across a spectrum of industries, including Oil and Gas, Food Processing, Chemical Processing, Pharmaceutical, Steel, Paper, Sugar, Palm Oil, Marine, Edible Oil, Rice, and Fertilizer. Versatility in Applications Kessels ET-30 Single Stage Steam Turbines can be seamlessly integrated into an array of applications, including Pump Drives, Fan Drives, Mill Drives, Generator Drives, Compressor Drives, Knives, and Shredder Drives. Power Capabilities Our turbines boast power capabilities ranging from 100 HP (75 kW) to a formidable 4,000 HP (3000KW), with speeds of up to 17,000 RPM. They can operate efficiently under pressures of up to 65 Kg/cm2 (925 Psig) and temperatures reaching 460°C (860°F). Design Versatility With seven distinct models, including Horizontal (axial and radial split), Vertical, API 611- and 612-compliant, Overhung, and between-the-bearings wheel designs, our turbines offer a range of options to suit your specific needs. Choose between metallic or carbon seals, Electronic/Hydraulic Mechanical governors, customized steam path components, Mechanical/Electronic safety trip systems, and Direct-Drive or integral gearboxes with suitable lubrication systems. Choose Kessels for Unrivaled Excellence Choosing Kessels Steam Turbines is a commitment to excellence, innovation, and reliability. Our ET-30 Single Stage Steam Turbine exemplifies these principles, offering you: Unmatched Efficiency: Harness the power of steam with unmatched efficiency, maximizing productivity while minimizing waste. Reliability Beyond Question: Crafted with precision and subjected to rigorous testing, our turbines ensure uninterrupted operations even in the most demanding industrial environments. Application Versatility: Adapt effortlessly to your unique requirements, confident that Kessels' expertise has you covered. Empower Your Future with Kessels In the competitive landscape of industrial steam turbines, every advantage counts. Step into a future of efficiency, reliability, and sustainability with the Kessels ET-30 Single Stage Steam Turbine. Contact us today to discover how our turbine can revolutionize your operations and lead you toward unprecedented success. Kessels Steam Turbines – Powering Progress, Powering You.

The C-1™ packer can be run as a conventionally set packer or, when run upside down, it can be set in compression. Emergency releases are provided for tension and compression operations. The G™ packer is an economical, compression-set packer, intended for lower pressure production applications. It is set by one-quarter-turn right-hand rotation. Release is accomplished by straight pickup of the tubing. If it is necessary to move the packer further downhole after release, one-fourth-turn left-hand rotation will put the tool back into the running position.

ELEKS: Your Ultimate Nearshore Software Development Partner Unlock the potential of nearshore software development with ELEKS – your gateway to building top-tier technology solutions across borders. With 11 delivery centers spanning 8 countries, we offer you a seamless collaboration experience that transcends geographical barriers and propels your projects to new heights. ELEKS Nearshore Software Development: The Future of Collaboration Time Zone and Geographical Alignment: Experience a level of synchronicity that offshore development can't provide. ELEKS nearshore software development ensures smooth communication, collaboration, and project delivery. Our nearshore advantage means regular onsite visits and a working partnership that's as cohesive as it is efficient. Unified Cultural Approach: Integration goes beyond technology – it's about embracing culture. Our experts seamlessly blend with your in-house team, adopting your unique ethos. Beyond that, we transfer vital process and behavior-change knowledge, ensuring a truly unified and synergistic approach. Faster Product Launch: Elevate your go-to-market strategy with ELEKS as your nearshore development partner. Our streamlined processes and collaborative approach mean you can launch your product twice as fast. Time is of the essence in today's dynamic market – we help you seize it. Superior Quality of Work: Satisfaction is not a target; it's a standard. At ELEKS, we never rest until you're completely satisfied. Our unmatched client satisfaction rating of 97% speaks volumes about our commitment to excellence. Trust us to deliver top-notch results. Access to Top Talent: ELEKS' talent pool boasts 2000+ multi-skilled specialists rooted in math and physics. This means you can assemble the perfect team to bring your vision to life. The right talent is the foundation of success – with us, it's a given. Dedicated Team: Complexity meets capability with our dedicated teams. We handpick specialists with tailored skills to flawlessly execute your software vision. No matter how intricate your project, our experts are up to the task. ELEKS Global Presence: Spanning 18 locations across three continents, ELEKS ensures swift and streamlined communication. With us, you'll experience the efficiency and cost-saving benefits of offshore development coupled with accessible, onsite collaboration. ELEKS Nearshore Software Development: Where Innovation Meets Excellence Our Nearshore Software Development Services: Our portfolio is a testament to three decades of innovation and expertise. With a wide range of market-leading software and consultancy services, we cater to global clients with diverse needs. What Sets ELEKS Apart? • Nearly three decades of custom software development excellence • Extensive technology consulting prowess • Deep strategic product design proficiency with a UX-certified team • One of Ukraine's largest data science teams • Mitigate investment risk with MVP development • Trailblazing technological innovation through our in-house R&D lab Nearshore vs. Offshore vs. Onshore: A Winning Formula with ELEKS When scaling or upskilling is the name of the game, onshore development can be effective but pricey. Offshore options save you time and money, but often come with control trade-offs. ELEKS introduces the winning formula: nearshore development. It blends cost efficiency with quality, offering streamlined communication and onsite visits without compromising savings. ELEKS Nearshore Software Development: Your Bridge to Innovation Experience the best of both worlds – a nearshore team that combines accessibility with efficiency. ELEKS empowers you to transcend borders, embrace innovation, and redefine success. With us, your nearshore journey is a step towards a more collaborative and prosperous future.

Unlike other TRSVs, the DepthStar valve functions completely independent of well pressure; therefore, it is able to operate at consistently low hydraulic pressures, making it an ideal solution for deepwater completions. The DepthStar® tubing-retrievable safety valve (TRSV) is a revolutionary concept in the realm of surface controlled subsurface safety valves. Previously, solutions to wellbore isolation of the piston required additional seals and/or gas-charged chambers where their reliability is heavily dependent on elastomeric seals and the permanent, long-term containment of a dome charge. The DepthStar valve, through the use of a revolutionary magnetic coupler, allows for positioning the hydraulic actuator completely out of the tubing wellbore. By repositioning the hydraulic actuator outside the tubing wellbore, the DepthStar valve becomes the world’s first 100% metal-to-metal (MTM) safety valve that contains no moving seals within the tubing wellbore. This reduction in seals combined with an intrinsically simple design makes the DepthStar TRSV inherently reliable. The DepthStar TRSV operates with a low operating pressure, making it an ideal solution for deep-set applications. Features » No moving seals exposed to the tubing wellbore » 100% MTM sealing within the tubing wellbore » Less than 5,000-psi maximum valve opening capability regardless of setting depth or pressure » Minimized number of body connections » Proven MTM, non-elastomer hydraulic actuator » Isolated flow tube *information referenced from supplier catalog.

Introducing the Revolutionary IRC (Internal Roll-on Connector) by Marlin Oil Tools: Your Key to Efficient and Reliable Coiled Tubing Connections in the Oil and Gas Industry Marlin Oil Tools proudly presents the IRC (Internal Roll-on Connector), a cutting-edge solution engineered to enhance the efficiency and reliability of well intervention operations. Designed to seamlessly connect the smooth lower end of coiled tubing (CT) to any downhole tool, the IRC stands out for its innovative design and superior performance in the demanding environments of the oil and gas industry. Here's why the IRC is an essential tool for your well intervention operations. Key Features of the IRC (Internal Roll-on Connector): Innovative Groove Design: The IRC features unique grooves in its upper part, which are specifically designed for the secure fixing of coiled tubing through a rolling process. This design ensures a tight and reliable connection, crucial for the successful execution of well intervention tasks. Threaded Lower Part for Versatile Tool Attachment: Equipped with a threaded lower section, the IRC allows for easy and secure attachment of various downhole tools. This feature provides the versatility needed to adapt to different operational requirements, making the IRC a versatile tool in your well intervention toolkit. Enhanced Sealing with FKM 90 O-rings: To ensure the integrity of well operations, the IRC is fitted with two O-rings made from the high-quality FKM 90 material. This offers superior sealing capabilities, effectively isolating the connector's internal space from the annulus and preventing fluid leakage. Efficient Installation Process: The installation of the IRC is simplified and efficient, utilizing a mechanical tubing cutter with rolling wheels. This process not only ensures a secure connection but also minimizes downtime, allowing for quicker setup and transition between operations. Elevate your well intervention operations with the IRC (Internal Roll-on Connector) from Marlin Oil Tools, a leading innovator in coiled tubing technology for the oil and gas sector. Designed for the secure connection of coiled tubing to downhole tools, the IRC features a unique groove design for rolling fixation and a threaded lower part for versatile tool attachment. Equipped with dual O-rings made from durable FKM 90 material, it provides exceptional sealing, enhancing operational integrity. The IRC is engineered for easy installation, offering efficiency and reliability in well intervention tasks. Choose the IRC for a seamless, leak-proof connection in your coiled tubing operations. Why Choose the IRC from Marlin Oil Tools? Secure and Reliable Connection: The unique groove design ensures a robust connection between coiled tubing and downhole tools, critical for the success of well intervention operations. Operational Versatility: The threaded lower part enhances the IRC's compatibility with a wide range of downhole tools, offering operational flexibility. Superior Sealing Performance: Dual O-rings made from FKM 90 material provide outstanding sealing, protecting against fluid leakage and ensuring the safety of well operations. Streamlined Installation: Designed for efficiency, the IRC's installation process reduces operational downtime, enhancing productivity and operational flow. Marlin Oil Tools is dedicated to providing the oil and gas industry with innovative solutions like the IRC (Internal Roll-on Connector), designed to meet the rigorous demands of well intervention operations. Contact us today to discover how our advanced coiled tubing tools can optimize your operational efficiency and success.

The WI retrievable injection valve is a high-performance, high-flow rate injection valve. High throughput is achieved by a unique valve configuration that minimizes turbulent and potentially erosive flow. Operation is not dependent on a specific flow rate, pressure, or setting depth, thus negating the need for adjustment over time. The valve incorporates a metal-to-metal valve and seat energized by the combination of an integral spring and well pressure acting from below. The WI injection valve can be deployed on a wireline lock or through-tubing pack-off device, providing flexibility not available with alternative injection valve systems. As a result of the simple design with fewer parts, redress and repair costs are considerably lower than those for other injection valve systems. Applications The WI injection valve is primarily used in water injection applications as an alternative to conventional tubing or wireline-set safety valves. The valve is also commonly used as a retrofit solution in water injectors in which a tubing to annulus leak has occurred. The valve can be deployed below the leak point to eliminate uncontrolled annulus pressure increases when the injection stops. Features » Compatible with all known lock systems » Dedicated designs to suit Halliburton EB0 intervention packers » Enhanced internal flow profile » Simple design and construction » Flow-loop testing performed to establish pressure drop versus pump rate *information referenced from supplier catalog.

Accelerate Your Construction Projects with Excavator Leasing from CWB National Leasing Enhance Your Operational Efficiency and Financial Flexibility In the dynamic world of construction, having access to advanced equipment like excavators is key to staying competitive and efficient. Leasing your excavator through Canadian Western Bank (CWB) National Leasing offers a versatile and financially astute solution that aligns with your project needs and budget. Here’s how leasing an excavator can be a game-changer for your construction business: 1. Swift Equipment Delivery CWB National Leasing prioritizes speed and efficiency. They review your application promptly and typically notify your equipment dealer about the payment within 48 hours of approval. This rapid process means your excavator can be delivered and operational in no time, keeping your projects on track. 2. Boosted Purchasing Power With CWB National Leasing, you can enhance your financial leverage. Opt for manageable periodic payments instead of a large upfront cost, freeing up capital for other critical business needs. Plus, the flexibility to add extra features or accessories to your excavator with a minor increase in payments further enhances its utility and efficiency. 3. Balanced Cash Flow Management Leasing an excavator allows for smaller payments over the term of the lease, enabling the equipment to start generating revenue while you're still paying for it. This approach helps maintain a favorable balance between your expenses and income. 4. Adaptable Payment Plans CWB National Leasing offers tailor-made payment options, including seasonal, semi-annual, or annual plans, to align with your business's cash flow. This adaptability is especially crucial in the construction industry, where income can vary based on project timelines. 5. Potential Tax Advantages Leasing can offer significant tax benefits, such as allowing you to expense lease payments rather than capitalizing the cost of the excavator. It's advisable to consult with a tax advisor to understand how leasing can improve your business’s tax position. Conclusion Opting to lease an excavator through CWB National Leasing is a strategic decision that empowers your construction business with the right tools while maintaining financial agility. It enables you to deploy state-of-the-art excavators in your projects while managing your finances effectively, paving the way for enhanced efficiency, growth, and profitability in the competitive construction market.

Fire pumps are an essential part of many water-based fire protection systems. They are used to increase the pressure (measured in psi and bar) of a water source when that source is not adequate for the system it's supplying. As part of a fire sprinkler system, a fire pump receives water from either an underground water supply or a water tank, lake, or reservoir, and is powered by electricity or diesel fuel. The high-pressure supplied by the pump distributes water through the sprinkler system and hose standpipes. Fire pumps are typically made with non-corrosive internal parts to avoid clogging due to corrosion.

Maximize Your Downhole Success with HOCA Oil Tools' Running Tools for Lock Mandrels In the complex world of downhole operations, the necessity for precision, safety, and efficiency cannot be overstated. HOCA Oil Tools, a leader in providing advanced downhole slick line tools, introduces a range of Running Tools specifically designed for Lock Mandrels, ensuring seamless integration and operation in your wellbore activities. HOCA’s Running Tools for Lock Mandrels: Precision, Versatility, and Reliability Our Running Tools for Lock Mandrels are engineered with precision, crafted to deliver unmatched performance in downhole settings. These tools are essential for setting or positioning downhole flow controls and devices at predetermined depths efficiently and accurately. Designed for versatility, they accommodate various sizes and types of Lock Mandrels, ensuring compatibility and flexibility for different downhole requirements. Experience the HOCA Oil Tools Difference At HOCA Oil Tools, we are committed to providing the oil and gas industry with downhole solutions that set new standards in quality, efficiency, and reliability. Our Running Tools for Lock Mandrels are a testament to this commitment, designed to enhance your downhole operations and drive success. Incorporating our Running Tools into your downhole toolkit not only ensures optimal performance but also aligns your operations with the highest standards of precision and safety. With HOCA Oil Tools, you gain a partner dedicated to supporting your downhole success with innovative solutions and exceptional service. Choose HOCA Oil Tools’ Running Tools for your Lock Mandrels and elevate your downhole operations to new heights. Partner with us and experience the difference that precision engineering, reliability, and dedicated support can make in your wellbore activities. Embrace the future of downhole operations with HOCA Oil Tools – where innovation meets precision and efficiency.

ELEKS: Powering the Future of Efficient Energy Distribution Management Harness the power of technology to revolutionize energy distribution management with ELEKS. Our expertise in energy software development brings stability, accessibility, cleanliness, and sustainability to your consumers while ensuring the resilience of your networks against challenges and threats. As a leading energy software company, we're at the forefront of developing and integrating Custom Distribution Management Systems (ADMS) that empower utility suppliers to meet customer demands for power quality, reliability, and data security. Elevate Your Energy Management with ELEKS Energy Software Development: Embrace the future of energy management with our advanced software solutions. Dramatically enhance productivity, accessibility, safety, and sustainability in your business power system. Join the ranks of forward-thinkers who are leveraging technology to redefine the energy landscape. Empowering Energy Producers and Distributors: Customized Solutions for You: As a seasoned custom software development company, ELEKS has been empowering energy producers, distributors, smart city developers, and governmental organizations for three decades. Our expertise lies in crafting tailored data-driven software solutions and energy management systems that leverage cutting-edge technologies such as Cloud, IoT, blockchain, and drones. Unveiling the Future of Energy Management: Understanding Your Needs: We comprehend the intricacies of the energy and utility industry – from modern power management solutions for diverse sources to facilities and businesses. Our journey has been marked by refining our understanding of unique industry challenges and leveraging technology to develop innovative solutions. Why Choose ELEKS? Experience That Matters: With a legacy spanning thirty years, ELEKS brings a wealth of experience to the table. Our team of experts is well-versed in addressing complex energy management challenges. Cutting-Edge Technologies: Our energy software development solutions are fueled by the latest technologies, including Cloud, IoT, blockchain, and more. Stay ahead of the curve and embrace the future with confidence. Empower Efficiency and Sustainability: Energy efficiency and sustainability aren't just buzzwords – they're critical factors in a changing world. ELEKS' solutions empower you to meet these demands head-on. Join the Energy Revolution with ELEKS Revolutionize the energy distribution landscape and empower efficient energy management with ELEKS. Our energy software development solutions are designed to catapult your business into a future of resilience, reliability, and sustainability. Embrace innovation – choose ELEKS to lead the way into a brighter, greener future.

Unleash the Power of Custom Hydraulics: Poseidon Robotics' Metering and Auxiliary Pump Solutions In the depths of the ocean, where precision and reliability are paramount, having the right hydraulic system can make all the difference in the success of your subsea operations. At Poseidon Robotics, we take immense pride in introducing our cutting-edge Custom Hydraulics, including the Metering Pump and Auxiliary Pump solutions. Designed to excel in the harshest subsea environments, our hydraulic systems offer unrivaled performance, efficiency, and adaptability. Custom Engineered for Your Unique Needs At Poseidon Robotics, we understand that every subsea mission is unique, and off-the-shelf solutions may not always suffice. That's why we offer custom-engineered hydraulics tailored to your specific requirements. Our team of experts works closely with you to design and manufacture hydraulic systems that perfectly align with the demands of your subsea projects. Metering Pump: Precision at Its Best When it comes to accurate fluid control and metering, our Metering Pump stands in a class of its own. Whether you need precise dosing in underwater chemical injections, flow rate control in subsea sampling, or any other application that demands precision, our Metering Pump delivers flawless results. With unparalleled accuracy and reliability, you can trust our Metering Pump to handle the most critical tasks with ease. Auxiliary Pump: Boosting Your Subsea Power The Auxiliary Pump from Poseidon Robotics is your reliable companion when you require additional hydraulic power for your subsea equipment. Whether it's powering hydraulic manipulators, tooling skids, or other heavy-duty operations, our Auxiliary Pump is up to the task. Its robust construction and high-performance capabilities ensure seamless integration with your existing hydraulic system, expanding its capabilities to new heights. Built to Withstand the Abyss Operating in the challenging subsea environment demands hydraulic systems that can endure the pressure—both literally and figuratively. Our Custom Hydraulics are engineered and tested to withstand the extreme conditions of the deep ocean. With superior corrosion resistance, rugged construction, and advanced sealing technology, our hydraulic solutions thrive even in the most demanding underwater scenarios. Safety and Performance, Hand in Hand At Poseidon Robotics, safety is our guiding principle. Our Custom Hydraulics are equipped with cutting-edge safety features, ensuring smooth and secure operation during every subsea mission. With precise flow control and reliable power delivery, you can focus on your objectives without compromising on safety. Unlock Your Subsea Potential with Poseidon Robotics Choosing Poseidon Robotics means partnering with a company that is dedicated to pushing the boundaries of subsea technology. Our Custom Hydraulics, including the Metering Pump and Auxiliary Pump, have been engineered to optimize your subsea operations, increase efficiency, and deliver unmatched performance. Experience the Future of Subsea Hydraulics Elevate your subsea missions to new heights with Poseidon Robotics' Custom Hydraulics. Whether you are in research, exploration, or offshore engineering, our hydraulic solutions will be the driving force behind your success. Join the Subsea Revolution Join hands with Poseidon Robotics and become a part of the subsea revolution. Contact us today to explore the possibilities of our Custom Hydraulics and embark on a journey of groundbreaking discoveries beneath the waves. With Poseidon Robotics, the ocean's secrets are within your grasp.

Elevate Your Operations with ELEKS Full-Cycle ERP Consulting and Implementation Services In the realm of modern business, operational excellence is the bridge to success. Introducing ELEKS Full-Cycle ERP Consulting and Implementation Services – your partner in achieving unrivaled performance, minimizing costs, and achieving a comprehensive, uninterrupted view of your organization. Embark on a transformative journey that redefines efficiency, optimizes processes, and unlocks your business's true potential. Experience the ELEKS Advantage: Streamline Inventory Management: The key to seamless operations lies in inventory management. ELEKS empowers you with a robust ERP system that automates and optimizes inventory, supply chain, vendor management, sourcing, and procurement processes. Leverage our decades of experience in ERP implementation and customization to choose the perfect solution that aligns with your business needs. Unlock Seamless Communication Flows: Efficient communication is the bedrock of success. A well-implemented ERP solution minimizes data-related hiccups, enhancing transparency, eliminating redundant workflows, and paving the way for intelligent, data-driven decisions. With a centralized database, all sources of information merge into a cohesive whole, simplifying data utilization and harnessing its true potential. Bridging the Gap from Manual to Automated: Manual processes hinder growth. ELEKS' ERP consulting experts revolutionize your operational landscape by implementing an ERP system that automates document management across various domains – from finance to HR and project management. By eliminating manual document processing, your team is free to focus on value-driven work while reducing errors and slashing time and labor costs. Enhance Security and Data Protection: In a data-driven world, security is paramount. ELEKS' ERP system empowers you to enhance data accuracy, consistency, and security. Controlled access and restrictions ensure a superior user experience across diverse profiles. Centralized data storage and secure information exchange further fortify your data fortress, fostering collaboration while keeping data integrity intact. Unleash Cost-Optimizing Processes: Repetitive tasks drain resources. ELEKS introduces an ERP solution that automates manual processes, particularly in procurement and sourcing management. Reduce costs, allocate resources more efficiently, and benefit from comprehensive data analysis and visualization tools that fuel performance optimization across your organization. ELEKS' Full-Cycle ERP Consulting Services: Expert Guidance, Optimal Outcomes: Navigating the ERP landscape is seamless with ELEKS' team of experts. From system selection to implementation, our experience-rich specialists guide you toward the ERP solution that best aligns with your unique business needs. Fit-Gap Analysis, Operational Efficiency: Meticulous analysis of your processes uncovers areas ripe for ERP optimization. Our multi-skilled software experts offer end-to-end project support, implementing customizations or applications as needed. Customization with ABAP Services: For SAP solutions that need a tailored touch, ELEKS offers ABAP language expertise. Harness tried-and-tested ABAP programming combined with deep domain knowledge to create a perfectly tuned ERP system. Seamless Implementation, Ongoing Excellence: From process design to post-launch support, ELEKS provides full-cycle ERP consulting and implementation services. Our 30+ years of enterprise software development experience ensure your ERP integration delivers exceptional results. Quality Assurance and System Performance: Our comprehensive quality assurance guarantees flawless ERP performance. Any issues or gaps in implementation are identified, resolved, and optimized, ensuring peak performance, robust security, and adherence to industry standards. Empower with BI/BO Implementation: ELEKS elevates your data value with modern BI and BO functionality. Predictive analytics drive decision-making, complex queries unearth insights, and data visualization dashboards become your trusted tools within an integrated ERP solution. Seamless Integration for Streamlined Communication: Our experts facilitate seamless integration between your ERP and other business applications, fostering secure data exchange and streamlined communication throughout your enterprise ecosystem. Unlock Your ERP's Full Potential: ELEKS redefines ERP excellence. For existing systems that fall short, our experienced team conducts post-implementation reviews. For every ERP we deploy, we ensure flawless integration with your environment, meeting your expectations and setting you on a path to operational brilliance. ELEKS: Your Bridge to Operational Excellence: Experience operational brilliance like never before. ELEKS Full-Cycle ERP Consulting and Implementation Services propel your organization to new heights of efficiency, cost optimization, and unparalleled performance. With ELEKS, the future of your organization's success is not just a vision – it's a tangible reality.

Introducing the RBS (Replaceable Blades Stabilizer) from Marlin Oil Tools: The Ultimate Solution for Precise Well Intervention Marlin Oil Tools is proud to unveil the RBS (Replaceable Blades Stabilizer), a cutting-edge downhole tool engineered to enhance the precision and efficiency of well interventions. Designed for seamless integration into the Bottom Hole Assembly (BHA), the RBS is essential for operations requiring the stabilization and centralization of the BHA within wells of varying inclinations and geometries. Key Features of the RBS (Replaceable Blades Stabilizer): Optimal BHA Centering: The RBS ensures that the BHA remains centered relative to the well's axis, vital for maintaining operational integrity in inclined wells up to 90 degrees. Versatile Blade Replacement: Equipped with replaceable blades, the RBS offers unparalleled adaptability, allowing for customization based on wellbore size and operational requirements. Enhanced Milling and Perforation: By centralizing the tool within the well, the RBS significantly improves the effectiveness and accuracy of milling and perforation tasks. Correction of Eccentric Placement: The stabilizer addresses issues related to the residual bending of coiled tubing, ensuring the CT BHA is correctly positioned within the well. Wide Range of Operations: With a set of different size blades, one tool can accommodate various operational needs, making it a versatile addition to any well intervention toolkit. Elevate your well intervention strategies with the RBS (Replaceable Blades Stabilizer) from Marlin Oil Tools, a premier downhole tool designed for maximum operational precision in the oil and gas industry. Featuring innovative replaceable blades for adaptability and enhanced centralization capabilities, the RBS stabilizer ensures accurate positioning for critical tasks such as milling and perforation. Suitable for wells with significant inclinations and equipped to correct coiled tubing bending issues, the RBS is your go-to tool for ensuring BHA stability and efficiency. Choose the RBS for a reliable, versatile solution to meet the demands of complex well interventions. Why Choose the RBS from Marlin Oil Tools? Precision in Well Intervention: Guarantees accurate BHA positioning for improved operational outcomes. Customizable for Specific Needs: Interchangeable blades provide flexibility for a wide array of well conditions and tasks. Ideal for Challenging Wells: Effectively stabilizes the BHA in wells with up to 90 degrees of inclination. Operational Versatility: One tool can adapt to multiple operational scenarios, reducing the need for multiple specialized tools. The RBS (Replaceable Blades Stabilizer) by Marlin Oil Tools represents the pinnacle of downhole stabilization technology, providing operators with a powerful tool for enhancing well intervention accuracy and efficiency. Incorporate the RBS into your operations to achieve superior performance and operational success.

OH-BGE Bilge Absorbent Boom is engineered to address the specific challenges of oil accumulation in the bilge, arising from engine leaks and oil changes. With its unique design and technical specifications, this product is your ally in safeguarding the environment. Technical Specifications: Part Number: OH-BGE Product Type: Absorbent Bilge Fluids Absorbed: Oil-Based Liquids Volume Absorbed per Unit: 1.59 gallons Color/Pattern: White Outside Skin Material: Polyester Rope Along Length: No Neutralizing: No Floating: Yes UV Resistant: No Size: 10” x 44” Filler Material: Polypropylene Filler Flame Resistant: No Incinerable: Yes Applications: • Marine vessels • Boats • Oil-powered machinery In the maritime tapestry where vessels traverse vast waters, a silent guardian emerges—the OH-BGE Bilge Absorbent Boom. Beyond its utilitarian role, this product narrates a story of efficiency, environmental consciousness, and unwavering commitment to technical excellence. Can is known for its testament to precision in oil cleanup. Meticulously crafted, it targets oil floating in the bilge, whether a result of engine leaks or the aftermath of oil changes. A Polypropylene Filler ensures optimal absorption, leaving the bilge spotless and safeguarding marine environments from potential contamination. Very handy to learn that the OH-BGE, equipped with an integrated loop of rope, effortlessly finds its place in the bilge. This seamless application isn't merely convenient; it's a strategic move to efficiently absorb oil before water circulates back to the ocean, lake, or river. Choosing the OH-BGE isn't merely a cleanup decision; it's a commitment to safeguarding our waters. This absorbent boom becomes a catalyst for environmental protection, actively contributing to the preservation of aquatic ecosystems. With every use, it signifies a pledge to a cleaner and more sustainable maritime future. the OH-BGE becomes an investment in environmental stewardship. It transcends being a product and emerges as a strategic choice for compliance with rigorous environmental regulations. This proactive step shields against potential fines tied to oil pollution, aligning fiscal prudence with ecological responsibility. OH-BGE orchestrates a symphony of technical prowess. Tailor-made with a specific size of 10” x 44” and an impressive volume absorption of 1.59 gallons per unit, it becomes an exemplar of efficient and targeted oil cleanup in the bilge. This isn't just a boom; it's a harmonious blend of technical excellence and environmental responsibility. Choose OH-BGE – where every ripple narrates a tale of environmental stewardship.

Are you tired of dealing with stubborn paraffin buildup in your wells? Look no further than HotStixx by StimStixx Technologies. Our cutting-edge product utilizes a specially formulated solid acid stick to deliver heated acid vapor with pinpoint accuracy at the zone of interest, creating a powerful combination of pressure and heat downhole to eliminate paraffin buildup. HotStixx is engineered to tackle paraffin-related challenges head-on. The heated acid vapor, generated by our innovative technology, interacts with paraffin deposits, breaking them down effectively. The precise delivery of pressure and heat ensures maximum penetration, targeting the problematic areas with unparalleled accuracy. Witness the power of HotStixx as it removes paraffin buildup, revitalizing your well's performance. As the heated acid vapor does its job, it quickly vaporizes and becomes fully spent down-hole. Thanks to its high reactivity and relatively low volume, no residual contaminated effluent remains. This eliminates the need for post-treatment clean-up or disposal, reducing environmental risks and streamlining your operations. With HotStixx, you can confidently overcome paraffin challenges while minimizing downtime and maximizing efficiency. Say goodbye to costly and time-consuming maintenance associated with paraffin buildup. With StimStixx Technologies, you can focus on optimizing production and enhancing your well's performance. Join the ranks of forward-thinking industry leaders who trust HotStixx by StimStixx Technologies to eliminate paraffin buildup effectively and efficiently. Experience the power of precision pressure and heat, and unlock the true potential of your wells. The future of paraffin removal starts here.

Introducing Safe-T-Whip™ Continuous RD-Long 13’ (SW-RD-02-L): Unparalleled Safety and Reliability for Longer Restraint Applications At Safe-T-Whip & Restraints Inc., safety is at the core of everything we do. We are thrilled to introduce our latest innovation - the SW-RD-02-L Safe-T-Whip™ Continuous RD-Long. Designed specifically for regular duty applications that require a longer restraint, this safety whip offers unmatched protection and reliability for pressurized pipe fittings in the oilfield. Dependable Regular Duty Design: Identified by its eye-catching yellow color and complemented by a yellow tag, SW-RD-02-L Safe-T-Whip™ Continuous RD-Long is meticulously crafted from robust 1/2" 12-Strand HMPE fiber. This reliable safety restraint is engineered for use on 2-inch 1502 hammer union pipelines up to an impressive 15,000psi or 3-inch iron up to 10,000psi. When you need a longer restraint without compromising on safety, trust Safe-T-Whip™ Continuous RD-Long to deliver. Enhancing Safety with Continuous Restraints: The Safe-T-Whip™ Continuous RD-Long is an integral part of our safety restraint system, designed to contain uncontrolled movement on both sides of a pipe union during sudden and total failure. By creating a choke on either side of a potential rupture, it effectively reduces in-line flowline movement as well as lateral movement, minimizing dangerous impacts. Engineered for Maximum Security: The Safe-T-Whip™ Continuous system offers end-to-end restraint of flowlines for all lengths of pipe sections, as well as swivels and joints. Each section is secured by both the upstream and downstream sections of the flowline in the event of failure. However, it is essential to evaluate the piping system to ensure adequate anchoring both upstream and downstream for optimum safety. Certified for Excellence: Safety is our priority, and that's why all Safe-T-Whip™ Restraints and Anchors are thoroughly tested and certified to meet the highest industry standards. Our commitment to quality ensures that you receive a safety restraint system you can trust. Versatile and Effective: The Safe-T-Whip™ Continuous RD-Long is a variation of restraint designed for use on 2, 3, and 4-inch iron 1502 hammer union pipes, with recommended pressures ranging from 2,000psi to 15,000psi. This versatility allows you to tailor your safety configuration to your specific needs, ensuring the highest level of protection for your operations. Enhanced Flowline Safety: Once installed correctly, the Safe-T-Whip™ Continuous RD-Long is designed to limit unsafe flowline movement throughout the entire linear series of a flowline. With Safe-T-Whip™ Continuous RD-Long, you can rest assured that your operations are protected from catastrophic failures. Invest in Unparalleled Safety: SW-RD-02-L Safe-T-Whip™ Continuous RD-Long is the ultimate safety restraint for longer applications. Trust in the power of Safe-T-Whip™ to safeguard your workforce, equipment, and operations. With Safe-T-Whip & Restraints Inc., safety is always at the forefront. Secure your Safe-T-Whip™ Continuous RD-Long today.