Mechanical Tubing Perforator

Our chemical injection units can be used both onshore and offshore to support a variety of activities in the oil and gas industry. Continuous or standby duty, these chemical injection units are highly reliable and easy to operate. Clients use our chemical injection units for corrosion inhibition, wax inhibition, scale inhibition, hydrate removal, flocculent removal, sulphate removal, glycol injection, methanol injection, PH control, H2S scavenger injection, water chemistry adjustments, nitrate injection, and more. These skids are rated for offshore and desert conditions and can be customized for specific operating areas.

The FRN wireline-retrievable flapper valve, which is normally closed, is held open by hydraulic control pressure from the surface. The valve operates on a hydraulic-piston principle. To open, tubing pressure slightly higher than the well pressure below the closed flapper is applied. Once well pressure is equalized across the closed flapper, hydraulic pressure is applied to the piston, which pushes the flapper open. The flapper hinge assembly is designed so the force on the piston is not applied directly on the hinge pin. Upon loss of hydraulic pressure in the control line, the valve's large spring serves to lift the hydrostatic head of the control fluid. The flapper spring is designed to close the valve when the piston moves up past the flapper. Opening Prong Nose Seal The FRN valve uses the valve housing as the downstop for the opening prong. This metal-to-metal (MTM) interface is designed to prevent flow from passing between the valve housing and opening prong. The MTM interface isolates the flapper and seat from fluid flow while the valve is open. This design creates an MTM interface with the full force exerted by the hydraulic piston, minus the spring compression force, holding the two metal faces in contact. Radius of Curvature at Flow Entrance Halliburton conducted a study with various curvatures on the entrance to the valve. The study tested abrasive fluids flowing through different test subs and examined the resulting wear patterns. As a result, an optimum radius of curvature was determined and implemented on the valve housings of all wireline retrievable safety valves. Applications » New completions » Deep set » High pressure Features » High-strength rod-piston actuation » Non-equalizing flapper closure » Solid construction flapper made from bar stock » Spherical radius seat on flapper improves seal reliability » Sealing and seating surfaces are out of flow path of well production when valve is in open position » Designed for easy field servicing *information referenced from supplier catalog.

Elevate Your Business with ELEKS CRM Consulting and Implementation Services In the realm of modern business, customer relationships are the cornerstone of success. Introducing ELEKS CRM Consulting and Implementation Services – your gateway to harnessing cutting-edge technologies that enhance operations, amplify performance, and drive sales. Join the ranks of industry leaders who have unlocked the power of CRM systems to revolutionize customer engagement, streamline processes, and maximize profits. Experience the ELEKS Advantage: Boost Leads, Ignite Sales: Welcome to a new era of sales excellence. ELEKS helps you pinpoint and implement the perfect CRM system tailored to your organization's needs. This translates into access to cutting-edge tools, enabling sales process automation, pipeline planning, and predictive forecasting. Expand your marketing reach to boost lead volumes and witness improved conversion rates. AI-powered personalization, cross-selling, and upselling further elevate your average deal size. Enhance Retention, Fuel Lifetime Value: Customers are the heartbeat of your success. With the right CRM system, you can create a customer-centric ecosystem that skyrockets sales and marketing ROI. Personalized communication and tailored offerings not only nurture existing clients but also boost customer lifetime value. AI-driven insights into customer behavior provide the ammunition needed to reduce churn rates by offering targeted discounts, benefits, and data-driven recommendations. Elevate Customer Experience: Step into a realm of customer service mastery. Automated processes streamline support, enabling swifter and more personalized responses tailored to individual needs. Adopt an omnichannel approach for seamless communication. The magic doesn't end here – gain a 360° view of customer behavior and preferences, paving the way for tailored approaches, heightened client satisfaction, and a significant reduction in customer attrition. Foster Collaboration for Peak Performance: In a connected world, collaboration reigns supreme. ELEKS' enterprise software experts ensure the implementation of a CRM system that fits like a glove, offering optimal configuration and setup. Experience collaborative workflows and centralized customer management. A unified source of customer data fuels better team alignment, propelling your workforce towards peak performance and remarkable business outcomes. Unleash Potential with ELEKS CRM Consulting Services: Expert Guidance, Optimal Outcomes: Navigate the labyrinth of CRM choices with confidence. Our diverse team of cross-industry enterprise software experts guides you in selecting the best-fit CRM system. From system selection to implementation and customization, ELEKS ensures a seamless journey tailored to your business's unique context and needs. Ongoing Support, Unwavering Excellence: Decades of experience mean we're poised to identify and address any challenges that might arise during your enterprise system's implementation. Our industry-leading CRM support ensures your CRM software performs optimally, empowering your operations to soar to new heights. Optimize Your Processes, Elevate Productivity: When existing systems falter, ELEKS steps in. We analyze your processes, identify bottlenecks, and streamline your operations. Our expert team configures and sets up your system, enhancing productivity and unlocking its full potential for tangible returns. Smooth Implementation, Seamless Transition: For those venturing into enterprise resource management systems, we provide comprehensive support. Our experts guide you through every step, from project roadmap preparation and technical task scoping to stakeholder alignment and change management. Expert Team, Seamless Onboarding: Our extensive pool of skilled software specialists becomes your support network. They configure an expert team that navigates enterprise application consultancy, implementation, training, and ongoing assistance, ensuring your enterprise solution's long-term success. Unveil Opportunities for Growth: With decades of industry experience, our trusted consultants assess your enterprise software ecosystem. We identify areas for improvement and propose integration opportunities that maximize efficiency and cost-effectiveness. ELEKS: Where Vision Meets Implementation Excellence: ELEKS CRM Consulting and Implementation Services redefine what's possible in the realm of customer relationship management. Empower your organization with the tools to forge lasting customer bonds, streamline operations, and propel sales to new heights. Step into the future with confidence, knowing that ELEKS is your trusted partner in achieving CRM-driven success.

Streamline Your Document Management with Filing System Leasing from CWB National Leasing Optimizing Your Office Organization with Flexible and Efficient Storage Solutions For any business, efficient management of documents and records is crucial for smooth operations. Leasing filing systems through Canadian Western Bank (CWB) National Leasing offers a flexible, cost-effective, and smart solution for businesses seeking to enhance their document storage capabilities. Here’s how leasing filing systems can benefit your business: 1. Rapid Access to Modern Filing Solution CWB National Leasing understands the importance of effective document organization in your business. They offer a quick leasing process, with decisions typically made within 48 hours of your application. This ensures that your filing systems can be delivered and operational quickly, helping to organize your office space efficiently and reduce clutter. 2. Increased Financial Flexibility Leasing filing systems with CWB National Leasing boosts your buying power. It enables you to free up capital by opting for manageable periodic payments rather than a large upfront purchase. The option to add extra features or accessories to your filing systems for a small payment increase allows for customization to meet specific organizational needs. 3. Effective Cash Flow Management Manageable lease payments over the term mean your filing systems start contributing to your business’s efficiency while they're being paid off. This balanced approach helps maintain a healthy expense-to-revenue ratio, which is essential for business growth and financial stability. 4. Customizable Payment Plans CWB National Leasing offers a variety of payment options, including seasonal, semi-annual, or annual plans, tailored to your business’s financial cycle. This flexibility is particularly beneficial for businesses with seasonal fluctuations in income, ensuring that payments are practical and fit your financial situation. 5. Potential Tax Benefits Leasing filing systems can offer tax advantages, such as the ability to expense lease payments instead of capitalizing the cost of the equipment. Consulting with a tax advisor is recommended to understand how leasing can positively impact your business’s tax position. Conclusion Opting to lease filing systems through CWB National Leasing is a strategic decision that provides your business with essential organizational tools while maintaining financial flexibility. It ensures access to high-quality filing systems, vital for effective document management and office organization, without the financial burden of a large upfront investment. This leasing approach enables enhanced office efficiency, improved document accessibility, and increased overall productivity, contributing to the success of your business in a competitive market.

Optimize Downhole Operations with HOCA Oil Tools' BHP Tool Accessories In the ever-evolving oil and gas industry, precision, reliability, and efficiency are paramount. At HOCA Oil Tools, we understand the critical nature of accurate downhole data collection and the tools required to achieve this. Our BHP (Bottom Hole Pressure) Tool Accessories are designed to complement and enhance the performance of downhole pressure measurement tools, ensuring that operators can obtain the most accurate and reliable data possible. HOCA’s BHP Tool Accessories: Enhancing Downhole Data Collection Our BHP Tool Accessories range from specialized adaptors and seals to shock absorbers and carriers, all engineered to ensure that your downhole pressure measurement tools operate at peak efficiency. These accessories are crucial for protecting sensitive instruments, ensuring proper tool placement, and enhancing data transmission from the downhole environment to the surface. Manufactured with the highest quality materials and designed to meet rigorous industry standards, HOCA’s BHP Tool Accessories are the solution to optimizing your downhole operations. Experience the HOCA Oil Tools Advantage Choosing HOCA Oil Tools’ BHP Tool Accessories means opting for quality, reliability, and performance. Our commitment to excellence ensures that our products not only meet but exceed the stringent demands of the oil and gas industry. Whether you’re measuring downhole pressures, temperatures, or other critical parameters, our accessories provide the support needed to ensure successful data collection. Integrating our BHP Tool Accessories into your downhole toolkit signifies a step toward enhanced operational success and efficiency. With HOCA Oil Tools, you gain a partner dedicated to supporting your downhole challenges with innovative solutions and expert service. Select HOCA Oil Tools for your BHP Tool Accessories and transform the efficiency and accuracy of your downhole operations. Partner with us, and unlock the full potential of your downhole data collection with tools and accessories designed for success. With HOCA Oil Tools, you’re not just investing in products; you’re investing in the future of your downhole operations.

The FXE wireline-retrievable flapper valve, which is normally closed, is held open by hydraulic control pressure from the surface. The valve operates on a hydraulic piston principle. To open, hydraulic pressure slightly higher than the well pressure is applied to move the piston downward. This pressure unseats the secondary seat, allowing pressure to enter through equalizing ports. Then, as additional hydraulic pressure is applied to the piston, it continues downward movement, pushing the flapper open. The flapper hinge assembly is designed such that the force on the piston is not applied directly on the hinge pin. Upon loss of hydraulic pressure in the control line, the valve’s large spring serves to lift the hydrostatic head of the control fluid. The flapper spring is designed to close the valve when the piston moves up past the flapper. Opening Prong Nose Seal The FXE valve uses the valve housing as the downstop for the opening prong. This metal-to-metal (MTM) interface is designed to prevent flow from passing between the valve housing and the opening prong. The MTM interface isolates the flapper and seat from fluid flow while the valve is open. This design creates an MTM interface with the full force exerted by the hydraulic piston, minus the spring compression force, holding the two metal faces in contact. Radius of Curvature at Flow Entrance Halliburton conducted a study with various curvatures on the entrance to the valve. The study tested abrasive fluids flowing through different test subs and examined the resulting wear patterns. As a result, an optimum radius of curvature was determined and implemented on the valve housings of all wireline-retrievable safety valves. Applications » General production completions Features » Equalizing-type flapper closure » Solid construction flapper made from bar stock » Spherical radius seat on flapper improves seal reliability » Sealing and seating surfaces are out of the well production flow path when valve is in the open position *information referenced from supplier catalog.

The Baker Hughes SC-2™ retrievable packer is a high-performance, retrievable, sealbore packer. It can be run and set on electric wireline, slick line/tubing with the same setting tools used for the D packer. We can source from current stock or direct from the manufacturer.

Unlock Energy Efficiency with Kessels API-611 Steam Turbine: The Ultimate PRV Replacement Solution In the dynamic world of industrial applications, energy efficiency is the cornerstone of sustainable operations. Kessels Steam Turbines is proud to offer a groundbreaking solution that replaces traditional Pressure Reducing Valves (PRV) with our robust, reliable, and highly efficient API-611 Steam Turbines. Revolutionizing Energy Efficiency Kessels Single Stage Steam Turbines are tailor-made to handle Saturated Steam at low inlet pressures, harnessing the pressure drop of steam to generate power through the turbine via geared or gearless Turbo Generator set solutions. Choice in Generators for Your Unique Needs Our Turbo Generator sets can be configured with either Induction Generators or Synchronous Generators, catering to the specific requirements of our customers. Energy Recovery at Its Best Kessels Industrial PRV replacement solutions are designed to recover wasted energy by reducing steam pressure through our steam turbines, surpassing the limitations of traditional PRVs. This not only generates valuable power for industrial use but also caters to the process steam requirement of the industry. The result? Drastically reduced operational costs and reduced reliance on the grid and other more expensive power sources. Balancing Act: PRV and Power Generation Kessels Single Stage Steam Turbines are ingeniously designed to enable customers to enjoy the full benefits of a PRV system while simultaneously generating useful power. This equilibrium is achieved without compromising the stability or safety of the system or their setup. Maximizing Power Output For optimum performance, Kessels offers the option of Multiple Valve Operated Steam Turbines. These turbines ensure customers get maximum power output, even at partial loads and varying steam flows. Our valves, available in the Single Stage Steam Turbine range, can be controlled automatically through the special PLC-based governing system provided by Kessels for turbines coupled to Induction Generators. Versatile Powerhouses Kessels API-611 Steam Turbines are versatile, highly efficient, rugged, and robust. They boast single disc one-row and two-row Curtis impulse-type wheels, making them suitable for a wide range of industrial applications. Additionally, these turbines can be retrofitted to any existing boiler setup, making them a versatile choice for various installations. Key Features: Versatile and highly efficient. Single disc one-row and two-row Curtis impulse-type wheels. Retrofittable to existing boilers. Operates efficiently with high exhaust steam pressures. PLC-based control panel with HMI screen for ease of use (optional). Compatible with both Induction and Synchronous Generators. Operates in solo mode or synchronized mode. Can be synchronized with the grid and/or other power sources. Reduces operational costs with a short payback period. Quick startup times and option for complete automatic operation. Choose Kessels for a Sustainable Future Elevate your industrial operations with the Kessels API-611 Steam Turbine, the ultimate PRV replacement solution that combines energy efficiency, reliability, and versatility. Contact us today to discover how our turbine can revolutionize your energy management and lead you toward unprecedented success.

Introducing the Magna Range Bridge Plug from ID OilTools – the ultimate solution to passing restrictions and securely setting in larger tubing or casing. Our plug has been specially designed to handle differential pressures of up to 10,000psi at 350°F, making it the perfect choice for your downhole operations. Due to the extended setting range this plug has no pressure rating and as such the differential pressures are not guaranteed, even though the plug has passed several tests in these conditions. What sets our plug apart is its extended setting range, which allows it to pass through restricted I.D. tubing, saving you valuable time and money. With case-hardened slips above and below a three-piece nitrile rubber pack-off system, our plug is designed to maintain a constant sealing pressure. The slips are specially heat-treated to ensure a secure anchoring even in P-110 casing, with a hard outer layer for gripping and a soft inner layer for easier milling. To ensure centered setting of the small diameter plug in large I.D. pipe, our Magna Range Plug features ribbed cones that direct the slips to evenly spaced positions against the pipe. And should it be necessary to remove the plug after setting, a milling process is recommended as the plug is constructed of mild steel and is not considered drillable. Don't compromise on quality and reliability when it comes to your downhole operations. Choose the Magna Range Bridge Plug from ID OilTools, and experience the ultimate in performance and efficiency.

Introducing the MIG/STICK 202: Your Versatile Welding Companion for Oil and Gas Industry When it comes to MIG welding machines that deliver unmatched performance and precision, Canaweld is the name you can trust. Our high-performance MIG welders are designed to tackle the toughest welding jobs in the oil and gas industry, offering a wide range of durable MIG welders, industrial heavy-duty MIG welders, high-tech MIG pulse welders, and portable MIG welders to suit your needs. The Ultimate Welding Solution Canaweld MIG welding machines are not just powerful; they are versatile too. Whether you need to perform Flux-cored or Flux-cored gasless welding or MIG Brazing, our machines have got you covered. Designed for speed, ease of use, and cost savings, our MIG welders are engineered to handle various materials, including mild steel, stainless steel, aluminum (with or without a spool gun), chrome molybdenum, titanium, and copper alloys. Precision and Durability in Every Weld The MIG/STICK 202 is the epitome of portability, power, and versatility in welding. This unit is capable of welding up to 3/8-inch steel in either MIG mode or SMAW setting, providing you with the flexibility to tackle light to medium-duty welding jobs effortlessly. With the ability to run 0.023–0.045-inch MIG wire or up to 3/16-inch SMAW rods with a stable arc, this welding machine delivers exceptional results with every weld. Outstanding Features to Boost Your Productivity At Canaweld, we prioritize your welding experience. That's why the MIG/STICK 202 is equipped with an array of features that set it apart from the rest: • High power output: Enjoy 170A @ 100% Duty Cycle & 200A @ 35% Duty Cycle, giving you the power you need for demanding welding tasks. • Tested for the toughest conditions: The machine has been rigorously tested in extreme temperatures of 104°F /40°C to ensure optimal performance in any environment. • Inverter power source: The MIG/STICK 202 boasts an inverter power source with optimal welding characteristics in both MIG and Stick modes. • Power fluctuations compensation: The automatic compensation for main power fluctuations within ± 20% ensures a stable and consistent welding process. • Long-distance welding capability: With the ability to use up to 165 feet (50 meters) leads without any power loss at the weld, you can tackle distant welding projects effortlessly. • Precise wire feed: The high-grade metal dual drive roll system ensures precise and constant wire feed, preventing bird nesting and improving efficiency. • Wide welding range: Weld up to 3/8” steel and aluminum with ease, making it suitable for a wide range of applications. • Graduated knob for accuracy: Achieve the most accurate settings with the graduated knob, giving you full control over your welding process. • Stable arc with minimal spatter: The MIG/STICK 202 automatically controls wire speed by voltage feedback, resulting in an extremely stable arc with minimal spatter. • Reliable cooling and protection: Fan-cooled and thermally protected against overheating, this welding machine ensures longevity and durability. • Built-in polarity changeover: Easily switch between common gas and gasless wires with the built-in polarity changeover feature. • User-friendly design: The metal face panel adds durability, while the spool gun compatibility and support for both 8 and 12-inch wire spool sizes enhance convenience. • Comprehensive warranty: Enjoy peace of mind with our comprehensive 3-year warranty, knowing that your investment is protected. Experience Welding Excellence with Canaweld When it comes to welding machines for the oil and gas industry, Canaweld delivers superior performance, precision, and durability. Invest in the MIG/STICK 202 and take your welding capabilities to new heights. With Canaweld's commitment to quality and customer satisfaction, you're choosing a welding companion that will exceed your expectations. Unlock your welding potential with Canaweld. Experience the future of welding technology and achieve exceptional results with the MIG/STICK 202.

The WI retrievable injection valve is a high-performance, high-flow rate injection valve. High throughput is achieved by a unique valve configuration that minimizes turbulent and potentially erosive flow. Operation is not dependent on a specific flow rate, pressure, or setting depth, thus negating the need for adjustment over time. The valve incorporates a metal-to-metal valve and seat energized by the combination of an integral spring and well pressure acting from below. The WI injection valve can be deployed on a wireline lock or through-tubing pack-off device, providing flexibility not available with alternative injection valve systems. As a result of the simple design with fewer parts, redress and repair costs are considerably lower than those for other injection valve systems. Applications The WI injection valve is primarily used in water injection applications as an alternative to conventional tubing or wireline-set safety valves. The valve is also commonly used as a retrofit solution in water injectors in which a tubing to annulus leak has occurred. The valve can be deployed below the leak point to eliminate uncontrolled annulus pressure increases when the injection stops. Features » Compatible with all known lock systems » Dedicated designs to suit Halliburton EB0 intervention packers » Enhanced internal flow profile » Simple design and construction » Flow-loop testing performed to establish pressure drop versus pump rate *information referenced from supplier catalog.

The SP™ tubing-retrievable safety valve (TRSV) is a single rod-piston non-elastomer flapper valve designed for hostile environments and extended life applications where ultimate reliability is required. Potential leak paths within the valve are minimized with the single rod-piston design. The piston achieves a metal-to-metal (MTM) seal at its uppermost and lowermost positions to seal well pressure from the control system. The SP valves incorporate flappers using spherical radius sealing surfaces that help greatly improve seal reliability. The spherical radius design provides full MTM sealing integrity. For applications where either the OD or ID is restrained, SP valves incorporate a contoured flapper. OD/ID relationships are improved by the contoured flapper design, which helps provide superior MTM sealing when compared to other forms of curved flapper technology. Applications » For applications requiring ultimate reliability and longevity, such as high-temperature/high-pressure, and subsea completions, or hostile well environments Features » Non-elastomer dynamic piston seals » MTM static seal at upper and lower piston positions » MTM body joints » Flow tube fluted guide » 100% MTM flapper » Concentric thrust bearing » Wiper ring on upper flow tube » Cleanout ports in flow tube’s upper end » Internal exercise profile » Flow tube shock absorber » MTM face seat at flow tube downstop » Setting depths to 9,000 ft (2743 m) » Critical components isolated from well debris with valve in open position » Area above flow tube free of solids buildup » Flow tube can be manipulated by slickline » Protected from high flow rate slam closures *information referenced from supplier catalog.

MC (flapper-type) injection valves are used in injection wells to automatically shut-in the tubing string when injection stops or flow reverses. MC injection valves are spring-loaded, wireline-retrievable valves with large bores. The MC injection valves also feature sealing areas that are out of the direct flow path. These valves are designed to be held open by injection pressure for fluid passage. If injection flow becomes static or reverses for any reason, the spring and/or reverse flow causes the valves to close. These valves are designed to remain closed until pressure differential across the valves is equalized and injection is resumed. Applications » Injection wells Features » MC valves have sealing areas that are out of the direct flow path *information sourced from manufacturer

Expand Your Business Capabilities with Utility Trailer Leasing from CWB National Leasing Streamlining Operations with Flexible and Efficient Transportation Solutions For many businesses, utility trailers are an essential asset for transportation and logistics, providing the flexibility to move goods, equipment, and materials as needed. Leasing utility trailers through Canadian Western Bank (CWB) National Leasing offers a smart, financially viable option to enhance your operational capabilities. Here’s how leasing utility trailers can benefit your business: 1. Quick and Efficient Equipment Access CWB National Leasing values the pace of your business operations. They offer a rapid review and approval process for lease applications, typically providing a decision and notifying your equipment dealer about the payment within 48 hours. This prompt service ensures your utility trailers are delivered and ready for use quickly, aiding in keeping your business activities uninterrupted and efficient. 2. Improved Financial Flexibility Leasing utility trailers with CWB National Leasing boosts your buying power. It enables you to avoid large upfront purchases and instead opt for manageable periodic payments. This approach frees up capital for other critical business investments. Additionally, the flexibility to customize your trailers with additional features or accessories for a minimal increase in payments enhances their utility to suit specific business needs. 3. Optimal Cash Flow Management With smaller lease payments spread over the term, your utility trailers begin to contribute to your business’s revenue while still being paid off. This financial strategy is key in maintaining a favourable balance between expenses and income, which is essential for the growth and stability of your business. 4. Customizable Payment Plans Recognizing the diverse needs of businesses, CWB National Leasing offers various payment options, including seasonal, semi-annual, or annual plans, to align with your business’s revenue cycle. This flexibility is particularly beneficial for businesses with variable or seasonal income patterns, ensuring that payments are practical and aligned with your financial situation. 5. Potential Tax Benefits Leasing utility trailers can offer tax advantages, such as the ability to expense lease payments instead of capitalizing the cost of the equipment. It’s advisable to consult with a tax advisor to explore how leasing can positively impact your business’s tax position. Conclusion Opting to lease utility trailers through CWB National Leasing is a strategic decision that equips your business with vital transportation resources while maintaining financial agility. It ensures access to the necessary trailers for your logistics and delivery operations without the financial burden of a large upfront purchase, paving the way for enhanced operational efficiency, business expansion, and increased profitability.

Streamlining OCTG Tubular Goods Management with PipeDNA: Boosting Efficiency and Reliability Efficient management of OCTG (Oil Country Tubular Goods) is critical in the oil and gas industry to ensure the success of drilling and production operations. Introducing PipeDNA, a smart cloud-based platform dedicated to managing pipe and tube throughout the oil and gas supply chain. With its powerful features and innovative technology, PipeDNA empowers stakeholders to proactively manage their OCTG tubular goods, increase visibility, and optimize their operations for enhanced efficiency and reliability. Comprehensive Inventory Management and Tracking: PipeDNA offers a comprehensive inventory management and tracking system specifically tailored for OCTG tubular goods. Gain full visibility into your OCTG inventory, including utilization, activity, and trends. By monitoring the status and location of each OCTG pipe, stakeholders can proactively plan for upcoming drilling projects, streamline logistics, and optimize inventory levels. PipeDNA enables accurate tracking, reducing the risk of stockouts, minimizing downtime, and maximizing operational efficiency. Efficient Logistics Management: With PipeDNA, stakeholders can efficiently manage all aspects of logistics operations related to OCTG tubular goods. From shipments to status tracking and documentation, PipeDNA simplifies the entire process, ensuring seamless coordination across multiple locations and parties involved. Furthermore, the platform facilitates pipe bundling, enabling stakeholders to optimize transportation and storage, minimizing costs and improving overall efficiency. Streamlined Inspection Management: PipeDNA's inspection management feature provides a centralized platform to manage inspection jobs for OCTG tubular goods across multiple sites. With real-time tracking and status updates, stakeholders can monitor the progress of inspection jobs, ensuring timely completion and adherence to quality standards. Additionally, the platform enables the management of inspection profiles, allowing for efficient scheduling, tracking, and reporting of inspection activities. Automated Tally Operations: Pipe tallying is a crucial process in OCTG tubular goods management, and PipeDNA simplifies this operation with automated tally operations. Stakeholders can create and manage tally operations within the platform, streamlining the process and eliminating manual calculations. By automating pipe tally jobs and workflows, PipeDNA saves time, reduces errors, and ensures accurate and up-to-date tally results, enhancing overall operational efficiency. Enhanced Identification and Traceability: PipeDNA offers quick and accurate identification of OCTG tubular goods, providing stakeholders with essential pipe details, activity history, and traceability documentation. With seamless integration of popular barcode standards such as UPC, EAN, and QR codes, PipeDNA enables easy identification and tracking of each pipe, ensuring precise inventory control and reducing the risk of misplaced or misused OCTG tubular goods. This enhanced traceability minimizes downtime and improves resource allocation. Designed for the Oil and Gas Industry: PipeDNA was specifically designed for stakeholders across drilling, manufacturing, and oilfield services, catering to their unique needs in OCTG tubular goods management. Whether you are a drilling contractor, oilfield rental company, oilfield and inspection service provider, steel pipe manufacturer, or pipe distribution and storage provider, PipeDNA offers tailored solutions to streamline your OCTG operations and drive efficiency. Leveraging Emerging Technologies: At its core, PipeDNA harnesses the power of today's emerging technologies to optimize OCTG tubular goods management processes. The platform seamlessly integrates with popular barcode standards, such as UPC, EAN, and QR codes, enabling efficient barcoding and labeling. Moreover, PipeDNA is RFID ready, supporting the integration of RFID technologies for accurate asset tracking. The platform also facilitates IoT data integration using the MQTT standard, enabling fast and reliable sensor data integration for enhanced decision-making. PipeDNA revolutionizes OCTG tubular goods management in the oil and gas industry, providing a smart cloud-based platform that enhances efficiency, reliability, and visibility. With its comprehensive inventory management, streamlined logistics operations, automated tallying, and robust identification and traceability features, PipeDNA empowers stakeholders to optimize their OCTG operations and make informed decisions based on real-time data. Leverage the power of PipeDNA and take your OCTG tubular goods management to new heights of efficiency and reliability.

Storm Choke® K safety valves are ambient-type, wireline retrievable valves with the largest flow area of all direct controlled safety valves on the market. They are ideally suited for high-volume, low-pressure wells. These valves are normally closed and pre-charged with a set dome pressure. When the well flowing pressure drops below the predetermined dome-pressure charge because of a rupture in flowline or surface equipment, the dome pressure and main valve spring close the valve, shutting in the well below the earth’s surface. This valve contains a detent mechanism to provide a positive snap-action closure at the predetermined disaster rate of the valve. Its bore is not restricted by a flow bean. The valve is designed to resist pressure surges. A metal-to-metal poppet valve and seat comprise the valve’s primary closure mechanism. The K valve is ideal for protecting wells with declining bottomhole pressure. This valve closes in situations where a pressure decline would not activate a valve with a flow bean. To reopen the valve, the operator must fully equalize pressure either by applying pressure in the tubing from the surface or by an equalizing prong. The valve will reopen when the tubing pressure acting on the internal piston area overcomes the dome charge. Applications » Wells with declining bottomhole pressure » High-volume, low-pressure wells » Wells with no provisions for surface-controlled valves Features » Poppet closure » Large ports with capacity for high-volume wells » Designed to resist pressure surges *description excerpted from manufacturers catalogue.

The FXE wireline-retrievable flapper valve, which is normally closed, is held open by hydraulic control pressure from the surface. The valve operates on a hydraulic piston principle. To open, hydraulic pressure slightly higher than the well pressure is applied to move the piston downward. This pressure unseats the secondary seat, allowing pressure to enter through equalizing ports. Then, as additional hydraulic pressure is applied to the piston, it continues downward movement, pushing the flapper open. The flapper hinge assembly is designed such that the force on the piston is not applied directly on the hinge pin. Upon loss of hydraulic pressure in the control line, the valve’s large spring serves to lift the hydrostatic head of the control fluid. The flapper spring is designed to close the valve when the piston moves up past the flapper. Opening Prong Nose Seal The FXE valve uses the valve housing as the downstop for the opening prong. This metal-to-metal (MTM) interface is designed to prevent flow from passing between the valve housing and the opening prong. The MTM interface isolates the flapper and seat from fluid flow while the valve is open. This design creates an MTM interface with the full force exerted by the hydraulic piston, minus the spring compression force, holding the two metal faces in contact. Radius of Curvature at Flow Entrance Halliburton conducted a study with various curvatures on the entrance to the valve. The study tested abrasive fluids flowing through different test subs and examined the resulting wear patterns. As a result, an optimum radius of curvature was determined and implemented on the valve housings of all wireline-retrievable safety valves. Applications » General production completions Features » Equalizing-type flapper closure » Solid construction flapper made from bar stock » Spherical radius seat on flapper improves seal reliability » Sealing and seating surfaces are out of the well production flow path when valve is in the open position *information referenced from supplier catalog.

Optimize Your Downhole Retrieval Operations with HOCA Oil Tools' Shear Down External Fishing Neck Pulling Tools In the intricate world of oilfield operations, ensuring seamless downhole tool retrieval is pivotal for maintaining efficiency and minimizing downtime. HOCA Oil Tools, a specialist in crafting superior downhole slick line tools, proudly presents its Shear Down External Fishing Neck Pulling Tools. These tools are engineered with precision to facilitate the secure and efficient retrieval of subsurface equipment, enhancing operational effectiveness and safety. HOCA’s Shear Down External Fishing Neck Pulling Tools: Precision Engineered for Enhanced Retrieval Our Shear Down External Fishing Neck Pulling Tools are designed for operators who demand reliability and precision in their downhole activities. Built to engage and retrieve subsurface equipment with external fishing necks, these tools are essential for operations requiring the removal of downhole instruments. Equipped with a shear-down mechanism, these pulling tools allow for disengagement in scenarios where the retrieved equipment becomes immovably stuck, thereby ensuring the safety and continuity of operations. Experience the Difference with HOCA Oil Tools At HOCA Oil Tools, we are dedicated to providing the oil and gas industry with downhole solutions that meet the demands of modern well operations. Our Shear Down External Fishing Neck Pulling Tools represent our commitment to innovation, quality, and customer satisfaction. Whether you are addressing routine retrieval tasks or facing complex downhole challenges, our tools are designed to enhance the efficiency, safety, and success of your operations. By incorporating our Shear Down External Fishing Neck Pulling Tools into your downhole toolkit, you are choosing a product that delivers on the promise of operational excellence. With HOCA Oil Tools, you gain not just a supplier, but a partner committed to supporting your success with state-of-the-art solutions and expert service. Choose HOCA Oil Tools for your downhole needs and take the first step towards more efficient, safe, and cost-effective retrieval operations. Elevate your downhole performance with HOCA Oil Tools – where innovation, quality, and reliability come together to drive your success.

Everything You Need, and MORE POWER Are you ready to take your subsea exploration to the next level? Meet the Lanai Pro ROV, the epitome of power, performance, and cutting-edge technology. Built on the strong foundation of the Lanai, the Pro version elevates your underwater missions with its unparalleled capabilities. Engineered by ROV Operators for More Power At Poseidon Robotics, we understand the challenges that subsea operators face. That's why we designed the Lanai Pro with precision and expertise, ensuring it meets your most demanding requirements. Step into the world of More Power with the Lanai Pro ROV. The Ultimate Powerhouse The Lanai Pro ROV is built to handle higher currents, making it a true powerhouse for your subsea operations. Experience a whole new level of control and efficiency with the following enhanced features: • 2kW Power Supply: The Lanai Pro comes equipped with a robust 2kW power supply, providing ample energy for extended missions and the most demanding payloads. • Extra Video Input: With an additional HD video input, the Lanai Pro allows you to expand your visual capabilities, capturing every intricate detail of the underwater realm. • Integrated 22in HD Monitor: Experience real-time, crystal-clear visuals with the integrated 22in HD monitor right at your fingertips, seamlessly integrated into the Console. Mastering the Depths with Precision The Lanai Pro ROV is designed by ROV operators, ensuring it meets the specific needs of professionals like you. Embrace its rugged design and dive into depths up to 400m (optional 975m). Its compact dimensions of 559x356x305mm (LWH) allow for easy maneuverability in the most confined spaces. Payload Flexibility and Imaging Excellence Unleash your creativity with the Lanai Pro's increased payload space, accommodating imaging sonar, scanning sonar, altimeter, CTD, UT, and more without requiring a tool skid. The 4 lateral (35deg) and 4 vertical Blue Robotics T200 connectorized thrusters ensure precise movements, enabling you to capture stunning visuals and data. Empowering Telemetry and Advanced Control The Lanai Pro boasts an Advanced Telemetry System, including 1x AUX Ethernet (10/100mbps) and 4x AUX RS485/RS232/RS422 interfaces. Two additional HD video inputs further enhance your visibility, while the power supply offers regulated 5/12/24VDC options. Pro Integrated Console - A Perfect Companion With the Lanai Pro Integrated Console, your control center becomes an oasis of efficiency. Operating at an output voltage of 350-420VDC and 2.2kW, the Console's Intel i5 with stable Linux UI ensures seamless operations and easy monitoring with its 22in HD sunlight-readable MINI monitor. Trust in Quality When you choose Lanai Pro ROV, you invest in quality and reliability. Rest assured with a 2-year warranty and a comprehensive standard equipment package that includes a 250m tether/spool, Newton grabber, console/pro controller, spares, and cases. Dive into Discovery with Lanai Pro ROV Experience the future of subsea exploration with the Lanai Pro ROV. Propel your missions to greater depths and efficiency. Contact us today to unleash the power of exploration with the Lanai Pro – Big Performance from Small ROVs.

MC (flapper-type) injection valves are used in injection wells to automatically shut-in the tubing string when injection stops or flow reverses. MC injection valves are spring-loaded, wireline-retrievable valves with large bores. The MC injection valves also feature sealing areas that are out of the direct flow path. These valves are designed to be held open by injection pressure for fluid passage. If injection flow becomes static or reverses for any reason, the spring and/or reverse flow causes the valves to close. These valves are designed to remain closed until pressure differential across the valves is equalized and injection is resumed. Applications » Injection wells Features » MC valves have sealing areas that are out of the direct flow path *information sourced from manufacturer