Become Cybersecure

Transport trucks for long haul equipment moves. Specializing in international and express shipments. Since truck transportation effectively remains the most direct solution for the transport of your goods and cargo, it is also one of the fastest solutions. In other words, cargo is moved directly from point A to point B without requiring any change in transportation methods, as can be the case with other methods. If you need to get your goods from one place to another in a safe, reliable and cost effective way then truck transportation is hard to beat. So hard in fact that transporting goods by truck is still the most widely used mode of transport in Canada and North America. Contact us to arrange your next rig move or industrial equipment shipment.

The FXE wireline-retrievable flapper valve, which is normally closed, is held open by hydraulic control pressure from the surface. The valve operates on a hydraulic piston principle. To open, hydraulic pressure slightly higher than the well pressure is applied to move the piston downward. This pressure unseats the secondary seat, allowing pressure to enter through equalizing ports. Then, as additional hydraulic pressure is applied to the piston, it continues downward movement, pushing the flapper open. The flapper hinge assembly is designed such that the force on the piston is not applied directly on the hinge pin. Upon loss of hydraulic pressure in the control line, the valve’s large spring serves to lift the hydrostatic head of the control fluid. The flapper spring is designed to close the valve when the piston moves up past the flapper. Opening Prong Nose Seal The FXE valve uses the valve housing as the downstop for the opening prong. This metal-to-metal (MTM) interface is designed to prevent flow from passing between the valve housing and the opening prong. The MTM interface isolates the flapper and seat from fluid flow while the valve is open. This design creates an MTM interface with the full force exerted by the hydraulic piston, minus the spring compression force, holding the two metal faces in contact. Radius of Curvature at Flow Entrance Halliburton conducted a study with various curvatures on the entrance to the valve. The study tested abrasive fluids flowing through different test subs and examined the resulting wear patterns. As a result, an optimum radius of curvature was determined and implemented on the valve housings of all wireline-retrievable safety valves. Applications » General production completions Features » Equalizing-type flapper closure » Solid construction flapper made from bar stock » Spherical radius seat on flapper improves seal reliability » Sealing and seating surfaces are out of the well production flow path when valve is in the open position *information referenced from supplier catalog.

The SP™ tubing-retrievable safety valve (TRSV) is a single rod-piston non-elastomer flapper valve designed for hostile environments and extended life applications where ultimate reliability is required. Potential leak paths within the valve are minimized with the single rod-piston design. The piston achieves a metal-to-metal (MTM) seal at its uppermost and lowermost positions to seal well pressure from the control system. The SP valves incorporate flappers using spherical radius sealing surfaces that help greatly improve seal reliability. The spherical radius design provides full MTM sealing integrity. For applications where either the OD or ID is restrained, SP valves incorporate a contoured flapper. OD/ID relationships are improved by the contoured flapper design, which helps provide superior MTM sealing when compared to other forms of curved flapper technology. Applications » For applications requiring ultimate reliability and longevity, such as high-temperature/high-pressure, and subsea completions, or hostile well environments Features » Non-elastomer dynamic piston seals » MTM static seal at upper and lower piston positions » MTM body joints » Flow tube fluted guide » 100% MTM flapper » Concentric thrust bearing » Wiper ring on upper flow tube » Cleanout ports in flow tube’s upper end » Internal exercise profile » Flow tube shock absorber » MTM face seat at flow tube downstop » Setting depths to 9,000 ft (2743 m) » Critical components isolated from well debris with valve in open position » Area above flow tube free of solids buildup » Flow tube can be manipulated by slickline » Protected from high flow rate slam closures *information referenced from supplier catalog.

Discover Precision Welding with the TIG AC/DC 301 Pulse! At Canaweld, we take pride in providing welding solutions that are powerful, intelligent, and reliable. The TIG AC/DC 301 Pulse is no exception – a welding machine that exemplifies precision and performance. Designed to meet the diverse needs of professionals in the oil and gas industry, this welding powerhouse offers unparalleled versatility and ease of use. Versatile Welding Capabilities The TIG AC/DC 301 Pulse is a welding marvel, capable of both AC and DC TIG welding, including stainless, mild steel, and aluminum, as well as Stick welding. Whatever the application, our advanced TIG welding parameters enable you to fine-tune the welding process, delivering exceptional results every time. From intricate welding tasks to heavy-duty projects, the AC/DC 301 Pulse rises to the occasion, giving you the flexibility to tackle any welding challenge. Power Meets Intelligence Built with intelligence and efficiency in mind, the AC/DC 301 Pulse features digital control of all welding parameters. This intuitive interface empowers you to tailor the welding settings precisely to your needs, ensuring flawless welds with ease. Additionally, the easy-to-use pulse mode, complete with the "easy-pulse" function, simplifies your welding experience, providing maximum control over your welds. Durable and Portable Design Designed for the rigors of the oil and gas industry, the TIG AC/DC 301 Pulse boasts a compact and innovative design. The shock-proof fiber compound front panel and control panel protection safeguard the machine against accidental impact, ensuring long-lasting performance even in challenging environments. The robust handle integrated into the chassis makes it easy to carry, offering mobility and convenience when moving between welding tasks. Efficient and Reliable Performance With a high duty cycle, the AC/DC 301 Pulse proves to be a workhorse, perfect for production TIG welders who demand the best all day, every day. Its exceptional TIG welding characteristics, paired with automatic compensation for power fluctuations, guarantee consistent and reliable performance in every weld. Unmatched Control and Customization Take control of your welding with the TIG AC/DC 301 Pulse. Special TIG torches enable remote control of welding parameters directly from the torch, giving you the flexibility to fine-tune your welds while working. Furthermore, optional software customization offers added features and tailored settings, enhancing your welding experience even further. Experience the Canaweld Advantage As with all Canaweld products, the TIG AC/DC 301 Pulse is backed by our commitment to quality and customer satisfaction. We stand by the durability and reliability of our welding machines, offering a comprehensive 3-year warranty for your peace of mind. Elevate your welding capabilities with the TIG AC/DC 301 Pulse. Discover precision welding like never before and let Canaweld be your partner in achieving excellence in every weld. Embrace the power of intelligence with the TIG AC/DC 301 Pulse - Welding Perfected!

SSG Consulting is a Project, Engineering and Construction Management Consulting firm, specializing in the implementation of Business and Project Management solutions on Mega projects in various industries. - Authorised KEY360 channel partner Our services cover the following: - Project Advisory & Audits - EMPCM Execution - Specialist Project Controls & Forensics - Project Digitalisation - Project Resourcing - Analytics & Dashboarding Our Track Record: - 25 BILLION MANAGED VALUE - 300 MILLION PLATFORM TRANSACTIONS - 80 DEDICATED STAFF - 10X BUSINESS PROCESSES IMPROVEMENT

Simplify Your Charging with the Wisdom USB Adapter – A Smart Solution from Provix Provix is excited to unveil the Wisdom USB Adapter, a cutting-edge charging accessory designed to enhance your charging experience. This magnetic USB charger features self-designed connectors that redefine convenience and efficiency in powering your devices. Innovative Magnetic USB Connectors The USB Adapter boasts unique magnetic USB connectors, specifically engineered for a seamless and secure connection. This design allows for quick and effortless attachment to your devices, ensuring a stable and consistent charge. The user-friendly nature of these connectors makes the charging process incredibly simple, even in less-than-ideal conditions or tight spaces. Versatile for Various Environments The Wisdom USB Adapter is designed to extend your charging capabilities across multiple settings. Whether you're at home, in the office, a hotel, or on the go, this adapter provides a reliable charging solution. Its white color and sleek design add a touch of elegance to your tech collection, making it a stylish and practical choice. Durable and High-Quality Construction Crafted with a focus on durability, the USB Adapter features a high-quality magnetic connector and a robust connecting cable. With a cable length of 1 meter, it offers the flexibility and reach needed in various charging situations. Effortless Charging Process Using the Wisdom USB Adapter is straightforward and efficient: 1. Connect the magnetic head to the multi-purpose lamp's charging interface. 2. Attach the USB connector end to a WISDOM power adapter or any standard USB port. This simple two-step process ensures your devices are charged without any hassle, keeping them ready for use whenever you need them. Ideal for Modern Professionals The Wisdom USB Adapter is a perfect match for professionals who require a reliable and efficient charging solution for their equipment. Its compatibility with various devices and ease of use make it an indispensable tool for miners, construction workers, and outdoor enthusiasts. Get Your Wisdom USB Adapter Today Embrace the convenience of the Wisdom USB Adapter, available now at Provix. Visit our website at www.provix.net to discover more about this innovative charging solution and explore our range of high-quality mining and construction equipment. Stay charged and ready with Wisdom's advanced technology.

Elevate Your Data Security with Leased Backup Systems from CWB National Leasing Are you ready to take your business to new heights, ensuring the safety and security of your valuable data? Look no further because CWB National Leasing is your trusted partner when it comes to leasing data backup systems. Here's why choosing us is the right move for business owners like you: Get Your Equipment Fast In today's fast-paced digital landscape, data is king, and time is of the essence. At CWB National Leasing, we understand the urgency of securing your data, and we've streamlined our process to be lightning-fast. When you apply for a data backup system lease, you won't be kept waiting. In fact, we take pride in delivering rapid decisions on your lease application. Just how fast are we? Typically, we'll notify your chosen equipment dealer that payment is on its way within a mere 48 hours of your approval. So, while you focus on running your business, you can trust us to handle the logistics, ensuring your data backup equipment is delivered promptly. For more details on our approval turnaround times, take a look! Increase Your Buying Power Your buying power is a valuable asset, and we're here to help you maximize it. Instead of making a substantial upfront purchase, consider the advantages of periodic lease payments offered by CWB National Leasing. By opting for leasing, you can free up critical cash resources that can be invested in other essential areas of your business. But that's not all—we go a step further by allowing you to add extra features or accessories to your data backup equipment for a minor payment increase. Yes, that's right; we put the "POW" in Buying Power, giving you the flexibility to customize your equipment to meet your unique needs. Control Your Cash Flow Effective cash flow management is crucial for any successful business. When you lease data backup systems with CWB National Leasing, you gain a powerful tool for achieving this control. Our lease agreements are structured to ensure small and manageable payments throughout the lease term. What does this mean for you? It means that as you pay off your data backup equipment, it will begin earning you money while you maintain a healthy balance between expenses and revenue. This approach makes it easy to ensure a favorable expense-to-revenue ratio, putting you in control of your financial success. Seasonal Payment Options At CWB National Leasing, we understand that businesses often experience seasonal variations in revenue. We are all about flexibility, and our leasing solutions are designed to adapt to your unique financial cycles. Whether you prefer payments on a seasonal, semi-annual, or annual basis, we can structure your lease to align seamlessly with your revenue patterns. With CWB National Leasing, your data backup system lease will always be convenient and tailored to your specific needs. Potential Tax Savings Leasing data backup systems through CWB National Leasing isn't just a smart business decision; it can also offer potential tax benefits. In many instances, leasing allows you to expense lease payments, providing income tax advantages rather than dealing with the depreciation of equipment capital costs. To fully understand how leasing can optimize your business's tax position, we recommend consulting your tax advisor. Their expertise will help you navigate the tax advantages of leasing data backup systems with confidence. In conclusion, leasing data backup systems with CWB National Leasing is the strategic choice for business owners who are serious about protecting their data and ensuring business continuity. From lightning-fast equipment acquisition to increased buying power, controlled cash flow, flexible payment options, and potential tax savings, our leasing solutions are designed to empower your business. Don't compromise on the security of your data; choose CWB National Leasing for all your data backup system leasing needs today!

Introducing the IDC (Internal Dimple Connector) by Marlin Oil Tools: The Premier Solution for Secure Coiled Tubing Connections in Oil and Gas Well Interventions Marlin Oil Tools proudly unveils the IDC (Internal Dimple Connector), a breakthrough in coiled tubing connector technology, engineered to provide a seamless and secure connection between the smooth lower end of coiled tubing (CT) and various downhole tools essential for effective well intervention operations. Optimized for the oil and gas industry, the IDC ensures a robust link, enhancing operational efficiency and safety. Discover the unparalleled benefits of incorporating the IDC into your well intervention toolkit. Key Features of the IDC (Internal Dimple Connector): Optimized Connection Design: The IDC features innovative spherical recesses in its upper part, designed specifically for the precise and secure fixing of coiled tubing through mechanical or hydraulic pressing. This design ensures a tight and reliable connection, crucial for the demanding environments of well intervention jobs. Threaded Lower Part for Tool Attachment: The connector’s lower section is equipped with a thread to facilitate the easy attachment of downhole tools. This feature allows for a versatile use of the IDC across a wide range of well intervention activities, making it a staple in any operation. Enhanced Sealing with FKM 90 O-rings: Equipped with two O-rings made from the durable FKM 90 material, the IDC offers superior sealing capabilities. This design effectively isolates the internal space of the connector and the annulus, preventing fluid leakage and ensuring the integrity of well operations. Easy and Efficient Installation: The installation of the IDC is streamlined and efficient, compatible with dimple tools for both mechanical and hydraulic pressing. This ease of installation reduces operational downtime, enabling quicker transitions between tasks and enhancing overall productivity. Elevate your well intervention operations with the IDC (Internal Dimple Connector) from Marlin Oil Tools, a leading solution for coiled tubing applications in the oil and gas industry. Designed to securely link the smooth lower end of coiled tubing to downhole tools, the IDC features advanced spherical recesses for a reliable connection and a threaded lower part for easy tool attachment. With dual O-rings made from high-quality FKM 90 material, it offers exceptional sealing, protecting your operations from fluid leakage. Ideal for a variety of well intervention jobs, the IDC is engineered for easy installation with mechanical or hydraulic pressing, ensuring operational efficiency and safety. Choose the IDC for a trusted connection in your coiled tubing operations. Why Choose the IDC from Marlin Oil Tools? Reliability: Engineered for the harsh conditions of downhole operations, the IDC provides a secure and reliable connection, minimizing the risk of disconnections or failures during critical well intervention tasks. Versatility: The threaded lower part of the IDC makes it compatible with a broad array of downhole tools, offering unparalleled flexibility in well intervention operations. Operational Efficiency: Designed for quick and easy installation, the IDC reduces downtime and increases the efficiency of well intervention activities. Safety and Integrity: With its superior sealing capabilities, the IDC enhances the safety and integrity of well operations, ensuring a leak-free connection. Marlin Oil Tools is committed to advancing the efficiency and safety of oil and gas operations with innovative solutions like the IDC (Internal Dimple Connector). Contact us today to learn how our cutting-edge coiled tubing tools can optimize your well intervention strategies.

The Super Spooler SUHT-25-2415 is designed for the heaviest of spooling loads in the most adverse conditions. Spooling units designed to ensure cables or control lines are kept in tension while running in or out of hole. Our spooling units are fully designed, manufactured and assembled with sheaves (half or full moon) to guide control, injection, or mono-conductor cable preventing damage while being tripped in hole. Units are available in pneumatic, hydraulic, or electric drive and are ATEX zone and DNV certified as required by location. Spooling units can also be equipped with a filling pump to monitor pressure while tripping – improving efficiency as a sudden pressure drop indicates line damage.

Revolutionize Your Business with Engraver Leasing from CWB National Leasing Unleashing Creativity and Precision in Your Operations with Flexible Equipment Solutions For businesses in the signage, trophy, customization, or manufacturing industries, engravers are essential tools for adding intricate details and personalization to products. Leasing engravers through Canadian Western Bank (CWB) National Leasing offers an advantageous and financially sound solution for businesses looking to enhance their engraving capabilities. Here’s how leasing engravers can transform your business operations: 1. Quick Equipment Deployment CWB National Leasing recognizes the importance of keeping your operations uninterrupted. They ensure a rapid leasing process, typically making decisions within 48 hours of application submission. This swift turnaround means your engravers can be delivered and ready for use quickly, ensuring your business continues to run smoothly and efficiently. 2. Enhanced Financial Power Leasing engravers with CWB National Leasing increases your financial flexibility. Opting for periodic payments over a substantial initial purchase frees up capital for other critical aspects of your business. Additionally, the option to add extra features or accessories to your engravers for a small payment increase allows for customization to meet specific business needs. 3. Balanced Cash Flow Management Smaller lease payments over the term mean your engravers start contributing to your business’s revenue while still being paid off. This financial strategy is essential in maintaining a healthy balance between expenses and revenue, crucial for long-term business sustainability and growth. 4. Customizable Payment Plans CWB National Leasing offers a range of payment options, including seasonal, semi-annual, or annual plans, to match your business’s revenue cycle. This flexibility is especially beneficial for businesses with variable or seasonal income, ensuring that payments are manageable and fit your financial situation. 5. Potential Tax Benefits Leasing engravers can offer tax advantages, such as the ability to expense lease payments instead of capitalizing the cost of the equipment. Consulting with a tax advisor is advisable to understand how leasing can positively impact your business’s tax position. Conclusion Opting to lease engravers through CWB National Leasing is a strategic decision that equips your business with critical tools while maintaining financial agility. It ensures access to advanced engraving equipment, vital for delivering precision and creativity in your products, without the financial burden of a large upfront investment. This leasing approach enables enhanced operational efficiency, increased production capacity, and greater profitability, helping your business excel in the competitive customization and manufacturing market.

Unlock Data Protection Excellence with ALCiT's Veeam Partnership In the ever-evolving landscape of data protection, one name reigns supreme: Veeam. Over the past decade, Veeam has transcended from a niche player to a dominant force in the realm of backup solutions. However, at ALCiT, we understand that backups are only half the story – it's the restores that truly matter. What good is a backup if you can't restore it swiftly and flawlessly? Veeam: The Vanguard of Restoration Veeam's journey is one of evolution and innovation. From being a niche contender to becoming the go-to for backup solutions, Veeam has become synonymous with data protection. At ALCiT, we proudly unite with Veeam, focusing on what truly matters – seamless, rapid restoration. ALCiT and Veeam: Fortifying Your Data Assets Backup as a Service (BaaS): With ALCiT, you can now breathe easy. Tell us your restoration needs, and we'll handle the rest – from hardware to software and vigilant monitoring. Your peace of mind is our mission. CloudBackup Redefined: Data security knows no bounds. ALCiT's partnership with Veeam extends to safeguarding your data off-site, in a secure Canadian datacenter. Your data's sanctuary is our promise. Office 365: Protecting What Matters: Microsoft's service agreement might not cover data protection, but ALCiT does. Don't gamble with your data – our Office 365 backup solution ensures your valuable information is never compromised. Disaster Recovery as a Service (DRaaS): In the realm of data protection, disaster recovery is a cornerstone. ALCiT's DRaaS complements our BaaS offering, ensuring that your data remains resilient even in the face of adversity. Guardian of Your Data's Destiny Your data's protection and restoration are not just tasks; they're our commitment. With ALCiT's Veeam partnership, experience data protection that transcends uncertainty and empowers your digital future. Secure Your Data's Future Today ALCiT's partnership with Veeam isn't just a collaboration; it's a commitment to your data's integrity.

EnviroBlu is highly regarded for its cleaning effectiveness. It's designed as a powerful cleaner and degreaser that works well in industrial environments. The product's formulation allows it to break down dirt and grime at the molecular level, ensuring fast and reliable cleaning results. The 1-liter bottle's handy size also makes it convenient for spot cleaning and smaller tasks, offering a practical solution for maintaining hygiene and cleanliness in various industrial environments without the need for larger, bulkier containers. The 1-liter EnviroBlu cleaner- for maintaining hand tools and small equipment parts, and relatively small surfaces for daily use. Choose 1-liter EnviroBlu cleaner - for your hand tool and small equipment cleaning needs. Our 1-litre bottle delivers powerful cleaning performance while protecting the environment.

Elevate Your Textile Business with Embroidery Machine Leasing from CWB National Leasing Transforming Your Creative Ventures with Flexible and Cost-Effective Solutions In the dynamic world of textile and garment production, embroidery machines are pivotal for adding value and uniqueness to products. Leasing embroidery machines through Canadian Western Bank (CWB) National Leasing offers a strategic and financially astute solution for businesses looking to expand their embroidery capabilities. Here’s how leasing embroidery machines can enhance your textile business: 1. Rapid Equipment Access CWB National Leasing values the pace and efficiency of your business. They offer a fast and streamlined leasing process, with decisions typically made within 48 hours of application submission. This swift turnaround ensures that your embroidery machines can be delivered and operational quickly, keeping your production line active and efficient. 2. Enhanced Financial Flexibility Leasing embroidery machines with CWB National Leasing increases your purchasing power. Opting for periodic payments over a large upfront purchase helps free up capital for other crucial business operations. Additionally, the flexibility to add extra features or accessories to your machines for a small payment increase enables customization to meet your specific production requirements. 3. Effective Cash Flow Management With manageable lease payments spread over the term, your embroidery machines begin contributing to your business’s revenue while they are still being paid off. This approach helps maintain a healthy balance between expenses and revenue, which is essential for business growth and stability. 4. Customizable Payment Plans CWB National Leasing offers a variety of payment options, including seasonal, semi-annual, or annual plans, tailored to align with your business’s financial cycle. This flexibility is particularly beneficial for businesses with seasonal fluctuations in income, ensuring that payments are practical and aligned with your financial situation. 5. Potential Tax Advantages Leasing embroidery machines can offer tax benefits, such as the ability to expense lease payments instead of capitalizing the cost of the equipment. Consulting with a tax advisor is advisable to explore how leasing can positively impact your business’s tax position. Conclusion Choosing to lease embroidery machines through CWB National Leasing is a strategic decision that equips your textile business with advanced equipment while maintaining financial agility. It ensures access to state-of-the-art embroidery machines, vital for producing high-quality, detailed designs, without the financial burden of a large upfront investment. This leasing approach enables enhanced operational efficiency, increased production capacity, and greater profitability, helping your business to thrive in the competitive textile industry.

MC (flapper-type) injection valves are used in injection wells to automatically shut-in the tubing string when injection stops or flow reverses. MC injection valves are spring-loaded, wireline-retrievable valves with large bores. The MC injection valves also feature sealing areas that are out of the direct flow path. These valves are designed to be held open by injection pressure for fluid passage. If injection flow becomes static or reverses for any reason, the spring and/or reverse flow causes the valves to close. These valves are designed to remain closed until pressure differential across the valves is equalized and injection is resumed. Applications » Injection wells Features » MC valves have sealing areas that are out of the direct flow path *information sourced from manufacturer

Streamline Your Logistics with Shipping Container Leasing from CWB National Leasing Enhancing Your Storage and Transportation Capabilities with Flexible Leasing Solutions For businesses involved in logistics, transportation, or needing additional storage solutions, shipping containers are essential. Leasing shipping containers through Canadian Western Bank (CWB) National Leasing offers a flexible, cost-effective, and practical solution for businesses seeking to expand their operational capabilities. Here’s how leasing shipping containers can benefit your business: 1. Rapid Access to Storage and Transportation Solutions CWB National Leasing understands the importance of timely access to logistical resources. They offer a quick and efficient leasing process, typically providing decisions within 48 hours of application submission. This rapid turnaround ensures that your shipping containers can be delivered and operational quickly, enhancing your storage and transportation capabilities without delay. 2. Increased Financial Flexibility Leasing shipping containers with CWB National Leasing boosts your financial power. Opting for periodic payments over a large upfront purchase frees up capital for other vital aspects of your business. Additionally, the option to add extra features or accessories to your containers for a small payment increase allows for customization to meet specific operational needs. 3. Effective Cash Flow Management Manageable lease payments over the term mean your shipping containers start contributing to your business’s revenue while they’re being paid off. This balanced approach helps maintain a healthy expense-to-revenue ratio, which is crucial for the financial health and growth of your business. 4. Customizable Payment Plans CWB National Leasing offers various payment options, including seasonal, semi-annual, or annual plans, tailored to your business’s revenue cycle. This flexibility is especially beneficial for businesses with seasonal fluctuations in income, ensuring that payments are practical and fit your financial situation. 5. Potential Tax Advantages Leasing shipping containers can offer tax benefits, such as the ability to expense lease payments instead of capitalizing the cost of the equipment. Consulting with a tax advisor is advisable to understand how leasing can positively impact your business’s tax position. Conclusion Opting to lease shipping containers through CWB National Leasing is a strategic decision that provides your business with essential logistics equipment while maintaining financial flexibility. It ensures access to high-quality shipping containers, crucial for efficient storage and transportation, without the financial strain of a large upfront investment. This leasing approach enables enhanced operational efficiency, improved logistics management, and increased profitability, helping your business to excel in the competitive marketplace.

Introducing BMS VerSol B: The Perfect Replacement for Harmful Chemicals Cleanstream is proud to present BMS VerSol B, an environmentally friendly alternative to standard solvents like D-Limonene, Dearomatized hydrocarbons, and Perchloroethylene. We understand the negative impact that harmful chemicals have on our planet and that's why we have developed a product that is not only effective but also safer for the environment. With BMS VerSol B, you can say goodbye to traditional solvents and hello to a more sustainable future. BMS VerSol B is a chemical product that provides a more environmentally conscious alternative to D-Limonene. It's a perfect replacement for all your solvent needs, providing exceptional cleaning performance without the environmental hazards of traditional solvents. Whether you're a small business owner or a large industrial company, BMS VerSol B is the right choice for you. By choosing our product, you're taking a step towards reducing your costs and making a positive impact on the environment. At Cleanstream, we are committed to creating a sustainable future, and we believe that BMS VerSol B is just one of the many ways we can contribute to a cleaner, greener planet. So what are you waiting for? Make the switch to BMS VerSol B today and experience the benefits of a safer, more eco-friendly solvent. Contact us to learn more about how you can get started with BMS VerSol B.

Elevate Your Auto Service with Vehicle Diagnostic Equipment Leasing from CWB National Leasing Revolutionizing Your Automotive Diagnostics with State-of-the-Art Equipment Solutions For automotive repair shops, dealerships, and service centers, having the latest vehicle diagnostic equipment is essential for providing accurate and efficient service. Leasing this equipment through Canadian Western Bank (CWB) National Leasing offers a flexible, cost-effective, and efficient solution for businesses looking to enhance their diagnostic capabilities. Here’s how leasing vehicle diagnostic equipment can benefit your automotive business: 1. Fast Access to Advanced Diagnostic Tools CWB National Leasing recognizes the importance of having up-to-date diagnostic tools in the automotive industry. They offer a rapid leasing process, with decisions typically made within 48 hours of application submission. This quick turnaround ensures that your diagnostic equipment can be delivered and operational swiftly, enhancing your service quality and turnaround times. 2. Enhanced Financial Flexibility Leasing vehicle diagnostic equipment with CWB National Leasing increases your buying power. It allows you to spread costs over manageable periodic payments rather than a large upfront investment, freeing up capital for other important business operations. The flexibility to add extra features or accessories to your equipment for a small payment increase enables customization to meet specific service needs. 3. Effective Cash Flow Management Manageable lease payments over the term mean your diagnostic equipment starts contributing to your business’s revenue while it's being paid off. This strategy helps maintain a healthy balance between expenses and income, crucial for business growth and financial stability. 4. Customizable Payment Plans CWB National Leasing offers a variety of payment options, including seasonal, semi-annual, or annual plans, tailored to your business’s financial cycle. This flexibility is particularly beneficial for businesses with variable or seasonal income, ensuring that payments are practical and aligned with your financial situation. 5. Potential Tax Benefits Leasing vehicle diagnostic equipment can offer tax advantages, such as the ability to expense lease payments instead of capitalizing the cost of the equipment. Consulting with a tax advisor is advisable to understand how leasing can positively impact your business’s tax position. Conclusion Opting to lease vehicle diagnostic equipment through CWB National Leasing is a strategic decision that equips your automotive business with the latest tools while maintaining financial agility. It ensures access to advanced diagnostic technologies, vital for providing high-quality vehicle maintenance services, without the financial burden of a large upfront investment. This leasing approach enables enhanced service efficiency, improved diagnostic accuracy, and increased customer satisfaction, helping your automotive business to thrive in a competitive market.

The FRN wireline-retrievable flapper valve, which is normally closed, is held open by hydraulic control pressure from the surface. The valve operates on a hydraulic-piston principle. To open, tubing pressure slightly higher than the well pressure below the closed flapper is applied. Once well pressure is equalized across the closed flapper, hydraulic pressure is applied to the piston, which pushes the flapper open. The flapper hinge assembly is designed so the force on the piston is not applied directly on the hinge pin. Upon loss of hydraulic pressure in the control line, the valve's large spring serves to lift the hydrostatic head of the control fluid. The flapper spring is designed to close the valve when the piston moves up past the flapper. Opening Prong Nose Seal The FRN valve uses the valve housing as the downstop for the opening prong. This metal-to-metal (MTM) interface is designed to prevent flow from passing between the valve housing and opening prong. The MTM interface isolates the flapper and seat from fluid flow while the valve is open. This design creates an MTM interface with the full force exerted by the hydraulic piston, minus the spring compression force, holding the two metal faces in contact. Radius of Curvature at Flow Entrance Halliburton conducted a study with various curvatures on the entrance to the valve. The study tested abrasive fluids flowing through different test subs and examined the resulting wear patterns. As a result, an optimum radius of curvature was determined and implemented on the valve housings of all wireline retrievable safety valves. Applications » New completions » Deep set » High pressure Features » High-strength rod-piston actuation » Non-equalizing flapper closure » Solid construction flapper made from bar stock » Spherical radius seat on flapper improves seal reliability » Sealing and seating surfaces are out of flow path of well production when valve is in open position » Designed for easy field servicing *information referenced from supplier catalog.

Unleash the Power of Versatility with the Stickwelder 162 D! At Canaweld, we understand the diverse welding needs of the construction, oil & gas industries, and more. That's why we are thrilled to introduce the Stickwelder 162 D - a welding marvel that offers high-quality performance across a wide range of metals and thicknesses, ensuring impeccable results in every project. Portable Powerhouse The Stickwelder 162 D is designed to be your reliable companion, offering portability, power, and versatility in one compact unit. Whether you require Stick Welding or TIG welding with a lift start, this welding machine rises to the occasion, delivering consistent and exceptional welds. Safety and Efficiency Combined We understand the challenges of adverse conditions, which is why we've equipped the Stickwelder 162 D with an extra function that reduces power draw, ensuring safer and more efficient performance in challenging environments. When precision matters, trust the Stickwelder 162 D to get the job done. Ideal for Light to Medium Duty Projects From construction sites to oil & gas projects, the Stickwelder 162 D is the ideal choice for light to medium-duty projects, providing reliability and flexibility in all weather conditions. Its lightweight construction and convenient carrying belt make transportation a breeze, ensuring you can take this welding powerhouse wherever the job demands. Weld with Confidence Enjoy excellent arc characteristics with the most common rods up to 5/32 inches, providing you with the confidence to tackle a variety of welding tasks. Experience low power consumption, making it energy-efficient and eco-friendly. Ready for the Outdoors The Stickwelder 162 D is designed to work outdoors with the appropriate power generator, offering you the freedom to take on welding projects wherever they may be. It's fan-cooled and thermally protected, ensuring durability and performance even in demanding conditions. The Canaweld Promise With Canaweld's Stickwelder 162 D, you can rely on the Canaweld promise of excellence and durability. Our comprehensive 3-year warranty further solidifies our commitment to quality and customer satisfaction. Get the job done right with the Stickwelder 162 D. Embrace the power of versatility, portability, and efficiency, and elevate your welding experience with Canaweld. Whether you're on a construction site or in the oil & gas industry, trust the Stickwelder 162 D to deliver flawless welds. Choose the welding machine designed with your needs in mind - the Stickwelder 162 D. Welding Perfected!

Introducing the SBP Solvable Bridge Plug from Marlin Oil Tools: A Revolutionary Approach to Temporary Well Barrier Solutions Marlin Oil Tools is proud to unveil the SBP Solvable Bridge Plug, an innovative downhole tool designed for the efficient and environmentally friendly isolation of oil and gas wells. Engineered with state-of-the-art materials that fully dissolve in downhole conditions, the SBP offers a temporary barrier solution that simplifies well intervention processes and enhances operational efficiency. Key Features of the SBP Solvable Bridge Plug: Eco-Friendly Dissolution: Designed to completely dissolve over time, the SBP eliminates the need for mechanical removal, reducing environmental impact and operational costs. Efficient Well Isolation: The plug is set using a hydraulic Setting Tool (STT), ensuring a quick and secure installation to create a reliable temporary barrier and isolate underlying intervals. Fully Soluble Materials: Constructed from entirely soluble materials for both collets and the sealing element, ensuring that the plug will fully disintegrate without leaving residue. Field-Proven Reliability: The effectiveness and reliability of the SBP Solvable Bridge Plug have been rigorously tested and confirmed through extensive field work, offering peace of mind in its performance. Optimized for Oil and Gas Wells: Specifically tailored for use in oil and gas wells, the SBP is an ideal solution for operators seeking to enhance well management and operational flexibility. Streamlined Operations: By dissolving directly in the well, the SBP streamlines the workflow, eliminating the need for follow-up interventions for plug removal. Maximize your operational efficiency and environmental stewardship with the SBP Solvable Bridge Plug from Marlin Oil Tools, a leading-edge solution engineered for temporary well isolation in the oil and gas industry. Utilizing fully soluble materials that dissolve in downhole conditions, the SBP offers a reliable, cost-effective, and eco-friendly alternative to traditional bridge plugs. Set with a hydraulic Setting Tool (STT), this plug is designed to create an effective barrier and then dissolve, simplifying well interventions and eliminating the need for mechanical removal. Choose the SBP Solvable Bridge Plug for its field-proven reliability, operational efficiency, and commitment to environmental sustainability. Why Choose the SBP Solvable Bridge Plug from Marlin Oil Tools? Sustainable Well Management: Provides an environmentally friendly solution that reduces the ecological footprint of well operations. Cost-Effective Operations: Eliminates the expense and time associated with traditional plug removal, enhancing operational efficiency. Reliable Temporary Isolation: Ensures secure and effective temporary well isolation, supporting a wide range of intervention tasks. Proven in Field Applications: Backed by rigorous field testing, the SBP offers reliability and peace of mind for operators. The SBP Solvable Bridge Plug by Marlin Oil Tools represents the cutting edge in downhole tool technology, providing oil and gas operators with a smart, sustainable, and efficient solution for well isolation. Incorporate the SBP into your operations to benefit from its innovative design, operational excellence, and environmental benefits.