Public Sector Verticals

Storm Choke® K safety valves are ambient-type, wireline retrievable valves with the largest flow area of all direct controlled safety valves on the market. They are ideally suited for high-volume, low-pressure wells. These valves are normally closed and pre-charged with a set dome pressure. When the well flowing pressure drops below the predetermined dome-pressure charge because of a rupture in flowline or surface equipment, the dome pressure and main valve spring close the valve, shutting in the well below the earth’s surface. This valve contains a detent mechanism to provide a positive snap-action closure at the predetermined disaster rate of the valve. Its bore is not restricted by a flow bean. The valve is designed to resist pressure surges. A metal-to-metal poppet valve and seat comprise the valve’s primary closure mechanism. The K valve is ideal for protecting wells with declining bottomhole pressure. This valve closes in situations where a pressure decline would not activate a valve with a flow bean. To reopen the valve, the operator must fully equalize pressure either by applying pressure in the tubing from the surface or by an equalizing prong. The valve will reopen when the tubing pressure acting on the internal piston area overcomes the dome charge. Applications » Wells with declining bottomhole pressure » High-volume, low-pressure wells » Wells with no provisions for surface-controlled valves Features » Poppet closure » Large ports with capacity for high-volume wells » Designed to resist pressure surges *description excerpted from manufacturers catalogue.

Introducing the BPV (Back Pressure Valve) from Marlin Oil Tools: The Essential Safety Barrier for Coiled Tubing Operations in the Oil and Gas Industry Marlin Oil Tools is proud to present our BPV (Back Pressure Valve), a paramount downhole tool designed to enhance safety and operational integrity during well intervention tasks. Engineered with precision and reliability, the BPV is an indispensable component for maintaining control over well pressure and ensuring the protection of coiled tubing (CT) from potential hazards. Here's a detailed look at the BPV's design, functionality, and benefits, making it a must-have tool for any oil and gas operation. Key Features of the BPV (Back Pressure Valve): Directional Fluid Flow Control: The BPV is designed to allow fluid flow exclusively in one direction—downwards. This capability is crucial for preventing backflow and maintaining operational control during well intervention processes. Dual Flapper Valve System: Equipped with two duplicate cartridges featuring reliable flapper valves, the BPV offers an enhanced level of safety and redundancy. This double flapper back pressure valve system ensures that even if one valve encounters an issue, the other can continue to function effectively, providing an uninterrupted safety barrier. Comprehensive Well Pressure Control: The primary function of the BPV is to act as a safety barrier, preventing well fluids from entering the coiled tubing through the bottom of the Bore Hole Assembly (BHA). This function is vital for the safety of operations and the preservation of equipment integrity. Protection Against Mechanical Particles and Aggressive Environments: In addition to controlling well pressure, the BPV serves an auxiliary role in protecting the coiled tubing from mechanical particles and potentially aggressive well environments, such as those containing H2S and CO2. These elements can cause significant damage to the CT if allowed entry, making the BPV's protective capability critical for long-term equipment durability. Essential Tool for Every Job: Given its crucial safety and protective functions, the BPV is typically run on each well intervention job, underscoring its importance in the toolkit of downhole operations. Elevate your well intervention safety and efficiency with the BPV (Back Pressure Valve) from Marlin Oil Tools, a leading solution in oil and gas coiled tubing tools. Designed for downhole applications, the BPV features a double flapper valve system to ensure fluid flows only downwards, creating an effective barrier against well pressure. This safety essential prevents well fluid backflow into the CT, offering protection from mechanical particles and harsh environments like H2S and CO2. With dual reliable cartridges, the BPV is a critical component for every well intervention job, safeguarding both personnel and equipment by maintaining operational integrity and preventing damage from aggressive well conditions. Why Choose the BPV from Marlin Oil Tools? Unparalleled Safety and Control: Provides a reliable safety barrier for well pressure control, crucial for operational safety. Dual Valve Redundancy: Ensures continued operation and safety even if one valve fails, thanks to its double flapper valve design. Comprehensive Protection: Guards coiled tubing against mechanical damage and corrosion from aggressive well environments. Operational Necessity: An indispensable tool for every well intervention job, highlighting its importance in maintaining a safe and efficient operation. The BPV (Back Pressure Valve) by Marlin Oil Tools represents the pinnacle of safety and efficiency in coiled tubing operations within the oil and gas industry. Incorporate the BPV into your operations to ensure the highest standards of safety and equipment integrity. Contact Marlin Oil Tools today to learn more about how our innovative solutions can support your operational needs.

Elevate Your Communication with Video Conferencing System Leasing from CWB National Leasing Transforming Your Business Meetings with State-of-the-Art Digital Solutions In an era where digital communication is key to business success, having a reliable and high-quality video conferencing system is essential. Leasing video conferencing systems through Canadian Western Bank (CWB) National Leasing offers a flexible, cost-effective, and modern solution for businesses looking to enhance their digital communication capabilities. Here’s how leasing video conferencing systems can benefit your business: 1. Fast Access to Advanced Communication Technology CWB National Leasing understands the importance of effective digital communication in today’s business landscape. They provide a rapid leasing process, with decisions typically made within 48 hours of application submission. This ensures that your video conferencing systems can be delivered and operational quickly, enabling immediate enhancement of your communication strategies. 2. Increased Financial Flexibility Leasing video conferencing systems with CWB National Leasing enhances your buying power. It allows you to free up capital by choosing periodic payments over a large upfront purchase. The flexibility to add extra features or accessories to your systems for a small payment increase allows for customization to meet specific business communication needs. 3. Effective Cash Flow Management Manageable lease payments over the term mean your video conferencing systems start contributing to your business’s efficiency while they're being paid off. This strategy helps maintain a balanced expense-to-revenue ratio, crucial for business growth and financial stability. 4. Customizable Payment Plans CWB National Leasing offers a variety of payment options, including seasonal, semi-annual, or annual plans, tailored to your business’s financial cycle. This flexibility is particularly beneficial for businesses with seasonal fluctuations in revenue, ensuring that payments are practical and fit your financial situation. 5. Potential Tax Benefits Leasing video conferencing systems can offer tax advantages, such as the ability to expense lease payments instead of capitalizing the cost of the equipment. Consulting with a tax advisor is recommended to understand how leasing can optimize your business’s tax position. Conclusion Choosing to lease video conferencing systems through CWB National Leasing is a strategic decision that equips your business with essential digital communication tools while maintaining financial agility. It ensures access to the latest in video conferencing technology, vital for conducting efficient, high-quality digital meetings, without the financial burden of a large upfront investment. This leasing approach enables enhanced communication, improved collaboration, and increased productivity, contributing significantly to the success and growth of your business in the digital age.

The NE™ tubing-retrievable safety valve (TRSV) is a single rod-piston non-elastomer flapper valve designed for general production with enhanced reliability and long life. The valve includes the non-elastomer hydraulic actuator design from the highly reliable SP™ line of safety valves. Along with the metal-to-metal (MTM) body joints and closure mechanism, the actuator places this valve in the premium category while keeping costs economical. The simple, compact design enhances the valve’s overall reliability and provides for trouble-free operation. Applications » General production completions » Hostile well environments incompatible with elastomers Features » Non-elastomer dynamic piston seals » Simple compact design » 100% MTM well containment in closed position » Positive debris barrier at both ends of flow tube » No construction seals used in the lockout and communication system » Unique flow tube construction prevents debris from settling on top of flow tube *information referenced from supplier catalog.

Power Up Your Mining Gear with the Wisdom NWB-20 Charger from Provix Provix is excited to present the Wisdom NWB-20 Charger, a high-efficiency portable charger that is a game-changer for mining professionals. Tailored to meet the demanding needs of the mining industry, this charger offers reliable, fast, and efficient charging for your equipment. Versatile and Efficient Charging Solution The NWB-20 Charger features a wide-ranging AC input of AC 100-240 V ± 10%, 0.24 A, 50-60 Hz, making it suitable for global use. Additionally, its DC input of 7~30 V, 1.7 A, adds to its versatility, allowing it to adapt to various power sources. Optimized for Wisdom Mining Lamps Designed to complement Wisdom's line of mining lamps, the NWB-20 provides a maximum DC output voltage of 4.20 ± 0.05 V and a DC output current of 2000 mA ± 100 mA. It ensures efficient charging times of 6.5 hours for the KL8M and 4.5-6.5 hours for the KL5M, reducing downtime and increasing productivity in mining operations. Compact, Lightweight, and Portable The NWB-20 Charger is designed for portability and ease of use. It measures 116 x 76 x 56 mm (4.6 x 3.0 x 2.2 in) and weighs only 215 g (7.58 oz), making it easy to carry and store. This compact design is ideal for miners who need a reliable charging solution on the go. Reliable and Durable Charging Accessory This charger is not just about power; it's about durability and reliability. Its robust construction ensures it can withstand the harsh conditions often found in mining environments, providing consistent performance over time. Get the NWB-20 Charger Today Upgrade your mining equipment with the Wisdom NWB-20 Charger for a more efficient, reliable, and portable charging solution. Visit Provix to learn more about how this charger can benefit your mining operations. Explore our products at www.provix.net or contact our team for detailed information.

Are you in need of a high-quality, dependable bridge plug that can be deployed in small-bore conditions? Look no further than ID OilTools' Permanent Miniature Bridge Plug (PMBP)! Our PMBP system is specially designed to mechanically convert external pressure into additional sealing force, using metal grippers to withstand differential pressures of up to 7,500 PSI at 350°F with HSN elements (with other element options available upon request, such as Viton or Aflas). Our PMBPs boast a number of features that make them the ideal choice for pressure control in the 3/4" (19.05mm) to 1.75" (44mm) setting range. With a small O.D., they can be easily run in tubing with size restrictions like coiled tubing, while still forming a fluid tight seal against the tubing wall. Plus, all of our miniature bridge plugs have a pump-through check-valve option. But the benefits of our PMBPs don't stop there! They can be used in a variety of applications, including pressure control for snubbing operations, as a mechanical barrier to replace failed downhole equipment, as a mechanical barrier for coil tubing/velocity string retrieval, and for coil tubing cleanout using its pump-through feature for nitrogen purges. If you're in need of a high-quality, dependable bridge plug for small-bore conditions, look no further than ID OilTools' Permanent Miniature Bridge Plug. Contact us today to learn more about our PMBPs and how they can benefit your operation!

Just like a hose you might use to water your garden, the purpose of a hydraulic hose is to allow fluid to flow from one component to another – in this case hydraulic fluid. The hose is the conduit that ensures the fluid is able to travel unimpeded and it's a vital part of keeping hydraulics systems moving. A hydraulic hose is used anywhere in a hydraulic system requiring a flexible connection between two fluid ports. A hydraulic hose is a synthetic rubber tube surrounded by some sort of flexible strength enhancing winding, such as metal or fiber, and then covered in another rubber carcass. Flow velocity is determined by both the hydraulic pump's flow rate and the hydraulic hose size. Changing the flow rate of the hydraulic pump but leaving the hydraulic hose size the same will affect flow velocity. Standard high pressure hydraulic hose 1SN can in -40°C to +100°C, ID 4.8–50.8mm, OD 11.8–64mm, operating pressure 40–250, burst pressure 160–1000 bar.

Introducing the Canaweld Welder Cart for Single Phase Machines - Your Ultimate Welding Companion! When it comes to welding, having the right equipment at your fingertips is essential. That's why we've designed the Canaweld Welder Cart - a sturdy and reliable cart that will keep your single-phase machines organized and accessible at all times. With its thoughtful features and robust construction, this cart is the perfect addition to your welding setup. Built for Strength and Durability: The Canaweld Welder Cart is crafted with a strong steel construction that ensures it can handle the demands of the oil and gas industry. Its powder coat finish adds an extra layer of protection, making it resistant to wear and tear from daily use. Rest assured, this cart is built to last. Maximum Convenience, Minimum Effort: Moving your welding equipment has never been easier. The front caster wheels on our cart swivel a full 360 degrees, allowing for smooth and effortless turning. No more struggling to maneuver your machines - our cart does the work for you. Ample Storage Space: Organize your welding essentials with ease. The Canaweld Welder Cart features three-tier shelves thoughtfully designed to accommodate all your portable MIG welders, stick welders, plasma cutters, and necessary accessories. Plus, there's enough room for consumables and a gas cylinder, ensuring you have everything you need at your fingertips. Secure Your Equipment: Your safety is our priority. That's why we've equipped the cart with a chain to secure the gas tank firmly in place. Worried about keeping your cables and helmet tidy? The side hook provides a convenient storage solution for them, eliminating clutter and potential hazards. Unbeatable Dimensions: The Canaweld Welder Cart boasts spacious shelf dimensions that perfectly cater to your welding equipment: • Top Shelf: 18 X 11 X 1 inches • Middle Shelf: 15.5 X 11 X 1 inches • Lower Tray: 27.7 X 11.5 X 2 inches • Gas Bottle Space: 10.2 X 11.4 X 2 inches Ultimate Load Capacity: Our cart can handle the weight. With a load capacity of 110 lbs. (50 kg), you can trust that your valuable equipment is safe and secure while on the move. Efficiency Meets Style: The Canaweld Welder Cart is more than just a functional tool - it's a sleek and stylish addition to your welding setup. Its design not only optimizes your workflow but also adds a touch of professionalism to your workspace. Upgrade Your Welding Experience: Say goodbye to the hassle of transporting your welding equipment and embrace the convenience of the Canaweld Welder Cart. It's time to work smarter, not harder. Elevate your welding experience today with Canaweld - your trusted partner in welding solutions.

Cross coupling protectors are essential tools used in the oil and gas industry during the installation of completions in oil and gas wells. These protectors provide a variety of benefits that make them a necessary investment for any oil and gas company. Protects Control Lines: Cross coupling protectors help protect control lines from damage that can be caused by the installation process, environmental factors, and other external factors. By providing an extra layer of protection, the control line can last longer and reduce the need for costly repairs or replacements. Prevents Fluid Contamination in Cables: Cross coupling protectors prevent fluid contamination by keeping debris and other unwanted materials out of electrical cables during installation. This is particularly important in the oil and gas industry where contamination can lead to significant safety risks, equipment damage, and production losses. Reduces Maintenance Costs: The installation of cross coupling protectors can help reduce maintenance costs. By protecting control lines and cables the completion is less likely to require maintenance or repair. This can result in significant cost savings over the long-term. Improves Efficiency: Cross coupling protectors help to improve the efficiency of the installation process. By providing a secure connection and preventing contamination, the installation process can be completed more quickly and with fewer re-work. This can help to reduce downtime and increase productivity. Enhances Safety: Cross coupling protectors enhance safety by reducing the risk of equipment failure and fluid contamination. This can help to prevent accidents and injuries, and ensure that the installation process is completed safely. The use of cross coupling protectors is critical to the successful installation of tubing in oil wells. They provide numerous benefits including protecting tubing joints, preventing fluid contamination, reducing maintenance costs, improving efficiency, and enhancing safety. By investing in cross coupling protectors, oil and gas operators can ensure the long-term success of their operations while improving their bottom line.

Revitalize Your Legacy Systems: Unleash Innovation with ELEKS' Application Re-Engineering Services In the rapidly evolving landscape of technology, staying ahead requires more than just keeping up – it demands transformation. Introducing ELEKS' Application Re-Engineering Services, designed to breathe new life into your core legacy systems, boosting performance, agility, scalability, and user experience. Let's explore how ELEKS can help you embrace the future by reimagining the past. Empowering Your Transformation Journey At ELEKS, we understand that your legacy systems are the foundation of your business. However, these systems can become roadblocks as technology advances and market demands change. Our Application Re-Engineering Services are your bridge to the future, combining technological innovation with a focus on superior user experience (UX) and business agility. The ELEKS Advantage: How We Help You 1. Creating a Superior UX: In a competitive marketplace, exceptional user experience is a game-changer. We help you design application interfaces that enhance usability, engage consumers, and give you the edge needed to stand out. Through updating your technology stack and refining application design, we boost functionality and elevate visuals. 2. Scalability and Flexibility: Adaptability is the cornerstone of modern success. Our cloud migration services enhance the scalability, security, and flexibility of your software solutions, enabling you to navigate the ever-changing business environment without the limitations of outdated legacy systems. 3. Faster Optimization: Time is of the essence. Our nearshore team of software experts establishes Continuous Integration/Continuous Deployment (CI/CD) processes, saving substantial time and effort. This eliminates the need for freezes that lead to downtime and revenue loss, ensuring rapid application optimization. 4. Enhanced App Maintainability: Simplify changes and maintenance with our SaaS delivery model. By incorporating the benefits of the Cloud, we streamline application adjustments, all while reducing costs compared to traditional on-site hosting. 5. Proactively Preventing Performance Issues: Don't wait for issues to arise – prevent them. We help you address and anticipate performance issues with strategic re-engineering services that update your architecture and technology stack, ensuring optimal functionality and responsiveness. Our Comprehensive Approach ELEKS' commitment to your success is reflected in our comprehensive approach: • Requirements and Scoping: We dive deep into your unique business proposition, gaining an in-depth understanding before defining project requirements, timelines, and budgets. This ensures our re-engineering solutions align perfectly with your needs. • Application Re-Engineering: Our team of seasoned software engineers designs and rigorously tests robust re-engineering solutions tailored to your legacy setup. Every update and adjustment we make adds tangible value, enhancing efficiency and performance. • Launch and Support: After scoping, we deploy, configure, and launch your re-engineered solution – be it on-premise, through the Cloud, or via mobile app stores. Benefit from ELEKS' L2/L3 Support services that reduce maintenance costs, allowing you to focus your team on essential business activities. Embrace the Future with ELEKS ELEKS' Application Re-Engineering Services are your ticket to a revitalized technological landscape. Experience improved performance, streamlined operations, and enhanced user experiences. Let us transform your legacy systems into powerful tools that drive your business forward. Embrace innovation today for a competitive edge tomorrow – partner with ELEKS and redefine your technological journey.

Introducing the BPV (Back Pressure Valve) from Marlin Oil Tools: The Essential Safety Barrier for Coiled Tubing Operations in the Oil and Gas Industry Marlin Oil Tools is proud to present our BPV (Back Pressure Valve), a paramount downhole tool designed to enhance safety and operational integrity during well intervention tasks. Engineered with precision and reliability, the BPV is an indispensable component for maintaining control over well pressure and ensuring the protection of coiled tubing (CT) from potential hazards. Here's a detailed look at the BPV's design, functionality, and benefits, making it a must-have tool for any oil and gas operation. Key Features of the BPV (Back Pressure Valve): Directional Fluid Flow Control: The BPV is designed to allow fluid flow exclusively in one direction—downwards. This capability is crucial for preventing backflow and maintaining operational control during well intervention processes. Dual Flapper Valve System: Equipped with two duplicate cartridges featuring reliable flapper valves, the BPV offers an enhanced level of safety and redundancy. This double flapper back pressure valve system ensures that even if one valve encounters an issue, the other can continue to function effectively, providing an uninterrupted safety barrier. Comprehensive Well Pressure Control: The primary function of the BPV is to act as a safety barrier, preventing well fluids from entering the coiled tubing through the bottom of the Bore Hole Assembly (BHA). This function is vital for the safety of operations and the preservation of equipment integrity. Protection Against Mechanical Particles and Aggressive Environments: In addition to controlling well pressure, the BPV serves an auxiliary role in protecting the coiled tubing from mechanical particles and potentially aggressive well environments, such as those containing H2S and CO2. These elements can cause significant damage to the CT if allowed entry, making the BPV's protective capability critical for long-term equipment durability. Essential Tool for Every Job: Given its crucial safety and protective functions, the BPV is typically run on each well intervention job, underscoring its importance in the toolkit of downhole operations. Elevate your well intervention safety and efficiency with the BPV (Back Pressure Valve) from Marlin Oil Tools, a leading solution in oil and gas coiled tubing tools. Designed for downhole applications, the BPV features a double flapper valve system to ensure fluid flows only downwards, creating an effective barrier against well pressure. This safety essential prevents well fluid backflow into the CT, offering protection from mechanical particles and harsh environments like H2S and CO2. With dual reliable cartridges, the BPV is a critical component for every well intervention job, safeguarding both personnel and equipment by maintaining operational integrity and preventing damage from aggressive well conditions. Why Choose the BPV from Marlin Oil Tools? Unparalleled Safety and Control: Provides a reliable safety barrier for well pressure control, crucial for operational safety. Dual Valve Redundancy: Ensures continued operation and safety even if one valve fails, thanks to its double flapper valve design. Comprehensive Protection: Guards coiled tubing against mechanical damage and corrosion from aggressive well environments. Operational Necessity: An indispensable tool for every well intervention job, highlighting its importance in maintaining a safe and efficient operation. The BPV (Back Pressure Valve) by Marlin Oil Tools represents the pinnacle of safety and efficiency in coiled tubing operations within the oil and gas industry. Incorporate the BPV into your operations to ensure the highest standards of safety and equipment integrity. Contact Marlin Oil Tools today to learn more about how our innovative solutions can support your operational needs.

Elevate Your Auto Service with Vehicle Diagnostic Equipment Leasing from CWB National Leasing Revolutionizing Your Automotive Diagnostics with State-of-the-Art Equipment Solutions For automotive repair shops, dealerships, and service centers, having the latest vehicle diagnostic equipment is essential for providing accurate and efficient service. Leasing this equipment through Canadian Western Bank (CWB) National Leasing offers a flexible, cost-effective, and efficient solution for businesses looking to enhance their diagnostic capabilities. Here’s how leasing vehicle diagnostic equipment can benefit your automotive business: 1. Fast Access to Advanced Diagnostic Tools CWB National Leasing recognizes the importance of having up-to-date diagnostic tools in the automotive industry. They offer a rapid leasing process, with decisions typically made within 48 hours of application submission. This quick turnaround ensures that your diagnostic equipment can be delivered and operational swiftly, enhancing your service quality and turnaround times. 2. Enhanced Financial Flexibility Leasing vehicle diagnostic equipment with CWB National Leasing increases your buying power. It allows you to spread costs over manageable periodic payments rather than a large upfront investment, freeing up capital for other important business operations. The flexibility to add extra features or accessories to your equipment for a small payment increase enables customization to meet specific service needs. 3. Effective Cash Flow Management Manageable lease payments over the term mean your diagnostic equipment starts contributing to your business’s revenue while it's being paid off. This strategy helps maintain a healthy balance between expenses and income, crucial for business growth and financial stability. 4. Customizable Payment Plans CWB National Leasing offers a variety of payment options, including seasonal, semi-annual, or annual plans, tailored to your business’s financial cycle. This flexibility is particularly beneficial for businesses with variable or seasonal income, ensuring that payments are practical and aligned with your financial situation. 5. Potential Tax Benefits Leasing vehicle diagnostic equipment can offer tax advantages, such as the ability to expense lease payments instead of capitalizing the cost of the equipment. Consulting with a tax advisor is advisable to understand how leasing can positively impact your business’s tax position. Conclusion Opting to lease vehicle diagnostic equipment through CWB National Leasing is a strategic decision that equips your automotive business with the latest tools while maintaining financial agility. It ensures access to advanced diagnostic technologies, vital for providing high-quality vehicle maintenance services, without the financial burden of a large upfront investment. This leasing approach enables enhanced service efficiency, improved diagnostic accuracy, and increased customer satisfaction, helping your automotive business to thrive in a competitive market.

SSG Consulting is a Project, Engineering and Construction Management Consulting firm, specializing in the implementation of Business and Project Management solutions on Mega projects in various industries. - Authorised KEY360 channel partner Our services cover the following: - Project Advisory & Audits - EMPCM Execution - Specialist Project Controls & Forensics - Project Digitalisation - Project Resourcing - Analytics & Dashboarding Our Track Record: - 25 BILLION MANAGED VALUE - 300 MILLION PLATFORM TRANSACTIONS - 80 DEDICATED STAFF - 10X BUSINESS PROCESSES IMPROVEMENT

Enhance Charging Security and Efficiency with the CSA 36 Unit Locking FAST Charger Rack from Provix Provix is proud to offer the CSA 36 Unit Locking FAST Charger Rack (Part # NWI-NWCR-36BLC), an advanced charging solution designed to cater to the needs of mining, construction, and industrial professionals. This charger rack is an ideal blend of speed, security, and capacity, perfect for medium to large-scale operations. Swift Charging for Continuous Operations The CSA 36 Unit Charger Rack is engineered for quick and efficient charging, reducing downtime to a minimum. It boasts a charging time of just 4 hours for the WISE LITE2 and 5 hours for the LAMP3A/4A models. This rapid charging capability ensures your team's equipment is promptly ready for use, enhancing overall productivity. Secure Locking Mechanism for Added Safety With its locking feature, the CSA 36 Unit Charger Rack provides an extra layer of security, safeguarding your valuable equipment during charging. This is especially crucial in environments where the risk of theft or tampering is a concern. The locking mechanism ensures that the equipment remains secure, offering peace of mind and improved safety in the workplace. Space-Efficient Design for Organized Workspaces Despite its capacity to charge 36 units, this charger rack is designed with space efficiency in mind. Its compact form factor makes it an excellent fit for equipment rooms and charging stations where space is at a premium, helping maintain an organized and clutter-free environment. Durable Construction for Industrial Environments Built to withstand the harsh conditions typical of mining and industrial settings, the CSA charger rack is both durable and reliable. Its robust construction ensures it can endure daily wear and tear, offering long-term, dependable performance. Ideal for Varied Operational Needs Whether you’re managing a mining operation, a construction site, or an industrial facility, the CSA 36 Unit Locking FAST Charger Rack is an excellent choice. It accommodates a considerable number of units, making it suitable for operations that require efficient and secure charging solutions. Upgrade Your Charging Setup with Provix Invest in the Wisdom CSA 36 Unit Locking FAST Charger Rack to streamline your charging processes and enhance the security of your equipment. Visit Provix at www.provix.net to learn more about this high-capacity, secure charging solution and explore our range of specialized mining equipment.

A polycrystalline diamond compact (PDC) bit is a special type of diamond drilling bit that does not use roller cones, but instead has polycrystalline diamond inserts. PDC bits get their name from the polycrystalline diamond compacts used for their cutting structure. Since their first production in 1976, the popularity of bits using PDC cutters has grown steadily, and they are nearly as common as roller-cone bits in many drilling applications.

Reliable Gas Supply Solutions: Your Peace of Mind with Lovat Gas Solutions When you reach out to Lovat Gas Solutions, it's because you have a pressing need for gas. We understand the urgency and importance of resolving this issue promptly and efficiently. That's why we take our job seriously – to provide you with a gas supply solution that not only solves your immediate problem but also ensures a seamless experience without creating further headaches for your business. At Lovat Gas Solutions, we pride ourselves on our ability to develop and execute reliable gas supply solutions tailored to your specific application. We prioritize understanding your unique needs and challenges, working closely with you to devise a solution that effectively and consistently meets your requirements. Why choose Lovat Gas Solutions for your gas supply needs? 1. Customer-Centric Approach: Your satisfaction is our top priority. We listen attentively to your concerns, taking the time to understand the intricacies of your gas supply requirements. Our dedicated team is committed to developing and executing a solution that reliably solves your problem without causing additional complications. 2. Reliability: We recognize the critical importance of reliable gas supply for your business operations. With our extensive industry experience and expertise, we ensure that the gas supply solution we provide is dependable, allowing you to focus on your core business activities with peace of mind. 3. Tailored Solutions: We understand that each application is unique, requiring a customized approach. Our team of experts takes a proactive and innovative approach to develop a solution that precisely addresses your gas supply needs. Our goal is to exceed your expectations and provide you with a solution that seamlessly integrates into your existing operations. 4. Seamless Execution: At Lovat Gas Solutions, we believe in delivering on our promises. With meticulous planning, efficient execution, and attention to detail, we ensure a smooth transition from gas supply issues to reliable operations. Our commitment to your success is reflected in our dedication to providing a hassle-free experience. When you choose Lovat Gas Solutions, you choose a partner that takes your gas supply needs seriously. We are dedicated to solving your gas supply challenges without creating further headaches for your business. Contact us today, and let our experienced team develop and execute a reliable gas supply solution that meets your unique requirements. Experience peace of mind with Lovat Gas Solutions as your trusted gas supply partner.

The tubing hanger holds a feed-through mandrel equipped with the proper seals. Feed-through mandrel seals contain well pressure and prevent gas leaks at the surface. Power cables are connected to the two ends of this device via their three-phase connectors (also called: lower and upper pigtails). The feedthru portion of the system provides a fluid block at the wellhead permitting electrical power to pass safely and reliably through the well’s pressure barrier. The connector works with the wellhead manufacturer to assure proper fit and material compatibility.

Revolutionizing Industrial Cleaning: The 1000 Litre IBC of EnviroBlu At Mekapisk EnviroBlu Solutions Inc., we’re driven by a relentless pursuit of innovation and sustainability. Imagine a cleaning solution that’s not just powerful but also designed for the most demanding environments—continuous cleaning operations, remote locations, and mobile solutions. Introducing the 1000 litre IBC of EnviroBlu cleaner. This isn't just a product; it's a paradigm shift in industrial maintenance. The EnviroBlu Vision Our mission is simple: to create a cleaner, safer world for everyone. Built on the indigenous values of respecting and protecting our lands and waters, Mekapisk EnviroBlu Inc. and the EnviroBlu brand are dedicated to transforming industries through sustainable practices. Why EnviroBlu? Unparalleled Efficiency and Cost Savings In the industrial world, time is a precious commodity. The 1000 litre IBC of EnviroBlu cleaner is engineered for efficiency. Our advanced aqueous surfactant technology penetrates dirt and grime at the molecular level, ensuring rapid and thorough cleaning. Whether you’re running continuous operations, working in remote locations, or need a self-contained mobile solution, EnviroBlu gets the job done faster, cutting down cleaning time significantly. 1. Continuous Cleaning Operations For facilities requiring round-the-clock cleanliness, the 1000 litre IBC of EnviroBlu is a game-changer. Its large capacity ensures you have a consistent supply of powerful cleaner, reducing downtime and keeping your operations running smoothly. No more frequent refills; just uninterrupted, efficient cleaning. 2. Remote Locations In remote areas, logistics can be a challenge. The 1000 litre IBC of EnviroBlu provides a self-sufficient solution, eliminating the need for constant resupply. Its robust design and high capacity mean fewer deliveries, reducing transportation costs and environmental impact. 3. Mobile Solutions For industries that require mobility, such as maritime, construction, and oil and gas, the 1000 litre IBC offers a portable, self-contained cleaning system. Mounted on trucks, ships, or platforms, it delivers powerful cleaning capabilities wherever you need them. Environmentally Responsible EnviroBlu’s water-based, non-toxic, phosphate-free formula is safe for both people and the planet. Certified food safe by the Canada Food Inspection Agency (CFIA) and recognized as a Green Marine Partner, EnviroBlu ensures that you meet the highest environmental standards while maintaining superior cleanliness. The EnviroBlu Advantage 1. Superior Cleaning Power EnviroBlu’s advanced formula delivers industrial-strength cleaning without compromising safety. From heavy machinery and equipment to large surface areas, it tackles the toughest grime efficiently. 2. Significant Cost Savings With the 1000 litre IBC, you reduce product usage, labor, and downtime. The high-capacity container minimizes the need for frequent refills and resupply, lowering operational costs. Our powerful formula ensures you use less product for maximum results, saving you money. 3. Versatility Across Applications EnviroBlu is ideal for a range of applications, from industrial and commercial to remote and mobile operations. Its versatility makes it an indispensable tool in various sectors, including: • Industrial: Continuous operations in manufacturing, processing plants, and heavy industry. • Remote Locations: Mining sites, oil rigs, and remote construction projects. • Mobile Solutions: Maritime, transportation, and emergency response units. Green Marine Partner: Advancing Environmental Excellence EnviroBlu is a proud Green Marine Partner, participating in North America's leading environmental certification program for maritime industries. This voluntary initiative helps participants improve their environmental performance beyond regulations, targeting key issues related to air, water, and soil quality. How to Use EnviroBlu For Continuous Operations: 1. Connect the IBC to your automated cleaning system. 2. Monitor and maintain levels to ensure uninterrupted cleaning. For Remote Locations: 1. Position the IBC in a central, accessible location. 2. Use as needed, ensuring regular checks to maintain supply. For Mobile Solutions: 1. Secure the IBC on your mobile platform. 2. Connect to your pressure washers or cleaning systems. Stay Green, Go Blu! Choose the 1000 litre IBC of EnviroBlu for your continuous cleaning operations, remote locations, and mobile solutions. Experience unparalleled efficiency, cost savings, and environmental stewardship with EnviroBlu. Together, we can build a cleaner, greener future.

Unleashing the Full Potential of the Lanai ROV with Poseidon M0020 Backplates At Poseidon Robotics, we are dedicated to pushing the boundaries of subsea exploration and empowering our customers with the most advanced and field-friendly tools. Our latest innovation, the Poseidon M0020 backplate, takes the capabilities of our Lanai ROV to new heights, offering a versatile and efficient solution for all your underwater missions. Designed for Field-Friendly Operations When it comes to subsea operations, ease of use and adaptability are paramount. We understand the challenges our customers face in the field, which is why we developed the Poseidon M0020 backplate with their needs in mind. Our team of experts meticulously engineered this backplate to optimize its performance and enhance the overall ROV experience. Unrivaled Connectivity and Expandability The Poseidon M0020 backplate is a feat of engineering, incorporating a carefully planned configuration that includes multiple threaded locations to accommodate various connectors, sensors, and accessories. With 8 locations threaded for 7/16-20 connectors, 7 locations threaded for M10 sensors, and a small M6 location for lights, this backplate opens up a world of possibilities for customization and expansion. Enhanced Functionality with Manipulators and Accessories We designed the M0020 backplate to provide optimal support for a grabber, such as the BLUEPRINTLAB Reach Alpha, and two auxiliary ports for accessories like sonar, USBL, or mini-SVX. This flexibility allows you to tailor the Lanai ROV precisely to your mission requirements, ensuring that you have the right tools at your disposal to get the job done efficiently and effectively. Durable Construction for Deep-Water Missions The Poseidon M0020 backplate is crafted from 7075 Aluminum, renowned for its exceptional strength and durability. This material not only ensures that the backplate can withstand the rigors of challenging subsea environments but also provides a depth rating in excess of 500 meters. With the M0020 backplate, you can explore deeper and reach areas that were previously beyond your grasp. Seamless Integration with Lanai ROV The M0020 backplate is designed specifically for the Lanai ROV, ensuring a perfect fit and seamless integration. As with all our products, the backplate undergoes rigorous testing and quality assurance procedures to meet our stringent standards. When you choose Poseidon Robotics, you can be confident that every component is engineered with precision and dedication to excellence. Elevate Your Subsea Missions with Poseidon Robotics Our Poseidon M0020 backplate is just one example of our commitment to providing innovative solutions that empower our customers to achieve their goals in subsea exploration. Whether you are conducting scientific research, performing complex inspections, or participating in search and rescue operations, our technology equips you with the tools you need to excel in your mission. Discover the Possibilities Today Explore the limitless possibilities that the Poseidon M0020 backplate brings to your Lanai ROV. Take your subsea operations to new depths and expand your capabilities with ease. Get in touch with Poseidon Robotics today to learn more about our advanced backplate and how it can revolutionize your underwater missions. Choose Poseidon Robotics for Unmatched Performance As the premier provider of subsea robotics and ROV solutions, Poseidon Robotics stands as a trusted partner to professionals worldwide. Our dedication to innovation, quality, and customer satisfaction sets us apart, and we are ready to join you on your journey of discovery beneath the waves. Let us be your guide to unlocking the hidden wonders of the deep ocean.

Storm Choke® K safety valves are ambient-type, wireline retrievable valves with the largest flow area of all direct controlled safety valves on the market. They are ideally suited for high-volume, low-pressure wells. These valves are normally closed and pre-charged with a set dome pressure. When the well flowing pressure drops below the predetermined dome-pressure charge because of a rupture in flowline or surface equipment, the dome pressure and main valve spring close the valve, shutting in the well below the earth’s surface. This valve contains a detent mechanism to provide a positive snap-action closure at the predetermined disaster rate of the valve. Its bore is not restricted by a flow bean. The valve is designed to resist pressure surges. A metal-to-metal poppet valve and seat comprise the valve’s primary closure mechanism. The K valve is ideal for protecting wells with declining bottomhole pressure. This valve closes in situations where a pressure decline would not activate a valve with a flow bean. To reopen the valve, the operator must fully equalize pressure either by applying pressure in the tubing from the surface or by an equalizing prong. The valve will reopen when the tubing pressure acting on the internal piston area overcomes the dome charge. Applications » Wells with declining bottomhole pressure » High-volume, low-pressure wells » Wells with no provisions for surface-controlled valves Features » Poppet closure » Large ports with capacity for high-volume wells » Designed to resist pressure surges *description excerpted from manufacturers catalogue.