NWB-20 Charger

Storm Choke® K safety valves are ambient-type, wireline retrievable valves with the largest flow area of all direct controlled safety valves on the market. They are ideally suited for high-volume, low-pressure wells. These valves are normally closed and pre-charged with a set dome pressure. When the well flowing pressure drops below the predetermined dome-pressure charge because of a rupture in flowline or surface equipment, the dome pressure and main valve spring close the valve, shutting in the well below the earth’s surface. This valve contains a detent mechanism to provide a positive snap-action closure at the predetermined disaster rate of the valve. Its bore is not restricted by a flow bean. The valve is designed to resist pressure surges. A metal-to-metal poppet valve and seat comprise the valve’s primary closure mechanism. The K valve is ideal for protecting wells with declining bottomhole pressure. This valve closes in situations where a pressure decline would not activate a valve with a flow bean. To reopen the valve, the operator must fully equalize pressure either by applying pressure in the tubing from the surface or by an equalizing prong. The valve will reopen when the tubing pressure acting on the internal piston area overcomes the dome charge. Applications » Wells with declining bottomhole pressure » High-volume, low-pressure wells » Wells with no provisions for surface-controlled valves Features » Poppet closure » Large ports with capacity for high-volume wells » Designed to resist pressure surges *description excerpted from manufacturers catalogue.

Solidifying Your Fiber Optic Networks with Nulux’s Splice-On Connectors In the vast and dynamically intricate world of the Oil and Gas industry, where every drop of energy and every byte of data pulsates through extensive networks, ensuring stability, reliability, and durability in communication is pivotal. In this domain of seamless connectivity, Nulux Network Solutions, proudly presents its stellar service of Fiber Optic Splice-On Connectors, a vital link in fortifying and enhancing your fiber optic networks. Unveiling the Potency of Splice-On Connectors Splice-on connectors employ the refined technology of fusion splicing to facilitate the installation of standard fiber optic connectors even amidst the rigors of the field. In essence, they provide exceptionally low-loss terminations, becoming a fundamental component, particularly in sprawling and multifaceted fiber optic networks where every decibel of loss is critical. Not just a technological solution, splice-on connectors, when adeptly utilized in the right environments, endow the network with a termination that is not only highly durable but can also stoically endure the harsh and often unyielding conditions, so synonymous with the oil and gas sector. Nulux’s Splice-On Connectors: A Synthesis of Technology and Reliability Nulux Network Solutions, steeped in its unwavering commitment to providing products, solutions, and services across the entirety of the energy value chain, seeks to uplift and support the Oil and Gas sector by ensuring that every bit of your data, every communication, is transmitted with absolute integrity. Choosing Nulux for your Fiber Optic Splice-On Connectors means: Embarking on Sustainable Connectivity: Our services go beyond mere installations and solutions; we are your partners in charting a course towards a sustainable future, ensuring that every connection, every splice, is a step towards enhanced operational and environmental efficacy. Optimizing Network Performance: Our splice-on connectors, renowned for their low-loss terminations, ensure that your complex networks are bolstered with optimal performance, minimizing loss and maximizing data transmission integrity. Enduring Harsh Realities: The rugged durability of our splice-on connectors assures that even amidst the most austere and challenging conditions, your terminations remain steadfast, ensuring continuous, unimpeded connectivity. Forge Ahead with Confident Connectivity In an industry where data and communication flow with an undercurrent of criticality akin to the resources being extracted, processed, and transmitted, Nulux Network Solutions stands as a beacon of reliable, sustainable, and superior quality connectivity solutions. Join us in a journey where every splice is a testament to robust, unyielding, and impeccable connectivity, ensuring that every bit of data courses through your networks with precision and reliability, even in the most stringent of environments. Navigate through the pulsating veins of your operations with Nulux’s Fiber Optic Splice-On Connectors – because when it comes to connecting the vital lifelines of your operations, we ensure that every connection counts.

The Premier™ Packer with Striker™ interventionless packer setting system is a proven product for interventionless actuation of the Premier packer. It is the new class of “removable” packers designed for wells that demand the sealing performance of a permanent packer and the flexible workover options of a traditional retrievable packer. Because the Premier can be remotely actuated, rig time/cost is reduced and risks associated with standard well intervention setting methods, are minimized. This results in a cost-savings benefit for the operator. The Striker system is a device that generates packer setting force from hydrostatic well pressure. As a secondary or contingent setting method, it can also be set by hydraulic pressure. The Striker modular design is a derivation of the innovative and successful SB- 3H™ hydrostatic/hydraulic retainer production packer. It can be removed on the production string by cutting the mandrel with a chemical or mechanical cutting tool. The Premier system offers unique high-performance and multiple-removal options for high-cost intervention completions. We can source from current stock or direct from the manufacturer.

Cleanstream: Ensuring Safe and Efficient Storage of NORM Material At Cleanstream, we understand the importance of maintaining a safe and sustainable environment. That's why we have developed rigorous procedures and controls to ensure that NORM material is stored safely and efficiently until proper cleaning and/or disposal can be carried out. NORM, or Naturally Occurring Radioactive Material, is present in many industries, including oil and gas, mining, and manufacturing. While it is a naturally occurring substance, it can be harmful if not handled properly. That's why Clearstream has taken proactive steps to ensure that our clients can safely and responsibly manage their NORM material. Our state-of-the-art storage facilities are equipped with the latest technology to monitor and control environmental factors, including temperature, humidity, and radiation levels. Our experienced team of professionals is trained to handle NORM material safely and efficiently, ensuring that it is stored in compliance with all regulatory requirements. At Cleanstream, we understand that our clients' needs are unique, and we work closely with them to develop customized solutions that meet their specific requirements. Our flexible storage options are designed to accommodate various types of NORM material, and we can quickly and efficiently adapt to changing circumstances. We take great pride in our commitment to safety, quality, and environmental responsibility. Our rigorous procedures and controls ensure that our clients can have peace of mind, knowing that their NORM material is stored safely and efficiently until proper cleaning and/or disposal can be carried out. Contact us today to learn more about how Cleanstream can help you safely and responsibly manage your NORM material.

Revitalizing Wells with Precision: InWaTec Combined’s E-line Re-perforating Services In the lifecycle of an oil or gas well, the need to enhance production or manage reservoir depletion often leads to re-perforating—a strategic intervention aimed at revitalizing well performance. InWaTec Combined's E-line Re-perforating Services leverage the proven efficacy of wireline technology to refine and optimize this crucial process. Wireline, or electric line, has been the traditional mode for deploying perforating guns due to its substantial benefits. The real-time depth control ensures that each perforation is placed with surgical precision, while the selectivity afforded by wireline allows for targeted interventions, focusing on zones with the greatest potential for increased production. Moreover, the reduced logistics of wireline operations, as opposed to tubing deployment, offer a streamlined, cost-effective approach to well servicing. Historically, wireline perforating guns were differentiated based on their use—either as casing guns for pre-completion perforation or through-tubing guns for post-completion jobs. In today's industry, however, this distinction has been transcended. InWaTec Combined has embraced the versatility of wireline to deliver any engineered perforating system, regardless of the well's stage of life, alongside an extensive array of explosive devices. Our E-line Re-perforating Services are not merely about revisiting existing perforations. They represent a strategic re-evaluation and reconfiguration of the well's production strategy. Whether it's addressing areas of the reservoir that were initially bypassed, bypassing damaged perforations, or creating new pathways in depleted zones, our re-perforating services are tailored to meet the unique demands of each well. At InWaTec Combined, we understand that re-perforating is an opportunity to enhance well productivity significantly. Our expert teams, equipped with advanced diagnostic tools, evaluate the well's current status to identify the most promising zones for re-perforation. With this data, we employ the latest in shaped-charge technology and explosive devices, ensuring that new perforations deliver the maximum flow and recovery possible. Choosing InWaTec Combined's E-line Re-perforating Services means entrusting your well's performance to a company that values precision, efficiency, and innovation. Our commitment to excellence ensures that your re-perforating interventions are executed with the highest level of expertise, from planning to execution. Partner with us to revitalize your wells. With InWaTec Combined's E-line Re-perforating Services, you can expect to turn potential into production, optimizing your well's output and extending its productive life. Let us help you unlock the hidden value in your wells, one precise perforation at a time.

Introducing the SFF Surface Filter from Marlin Oil Tools: The Ultimate Solution for Protecting Your Downhole Equipment Marlin Oil Tools is proud to offer the SFF Surface Filter, a highly efficient tool designed to safeguard your downhole equipment by filtering mechanical particles from the liquid flow. Engineered with precision, the SFF Surface Filter is an essential addition to any oil and gas operation, ensuring the longevity and reliability of your valuable downhole tools. Key Features of the SFF Surface Filter: Advanced Filtration Technology: Utilizes a wire wound welded to the frame, creating gaps smaller than the permissible size of particles, thereby capturing and retaining mechanical impurities as the liquid flows through. Customizable Filtration Levels: Offers versatile filtration options with membrane fineness primarily available in 0.25 mm, 0.5 mm, and 0.9 mm, allowing operators to select the appropriate level of filtration for their specific well conditions. Durable and Reliable Design: Crafted for durability and long-term use, the SFF Surface Filter stands up to the demanding conditions of oil and gas extraction environments. Protects Sensitive Downhole Tools: Especially beneficial for tools that are highly sensitive to mechanical impurities, such as downhole mud motors with Metal-to-Metal power sections and downhole gas separators. Easy Installation: Designed for straightforward installation in the pipeline running from the pump to the well, ensuring seamless integration into your existing workflow. Enhanced Operational Efficiency: By preventing mechanical particle contamination, the SFF Surface Filter contributes to the smooth operation and reduced maintenance needs of downhole equipment, ultimately saving time and costs. Elevate the protection and efficiency of your oil and gas operations with the SFF Surface Filter from Marlin Oil Tools, a premier downhole tool solution engineered to filter mechanical particles from liquid flows. Featuring advanced filtration technology and customizable filtration levels, the SFF Surface Filter is designed to meet the rigorous demands of the oil and gas industry, ensuring the protection and longevity of sensitive downhole equipment. Whether you're dealing with downhole mud motors, gas separators, or other critical tools, the SFF Surface Filter offers a reliable, durable, and easy-to-install solution to maintain clean liquid flows and enhance operational efficiency. Opt for the SFF Surface Filter and invest in the safety and productivity of your downhole operations. Why Choose the SFF Surface Filter from Marlin Oil Tools? Superior Protection: Provides unmatched filtration to protect downhole equipment from mechanical impurities. Operational Versatility: Adaptable to a wide range of oil and gas operations with customizable filtration to suit diverse needs. Long-lasting Durability: Built to withstand the harsh conditions of oil and gas extraction, ensuring reliability and longevity. Cost-Efficient Maintenance: Reduces the need for frequent downhole tool maintenance, saving both time and operational costs. The SFF Surface Filter by Marlin Oil Tools represents the forefront of filtration technology in the oil and gas industry, providing a vital solution for maintaining the integrity and efficiency of your downhole equipment. Choose the SFF Surface Filter for an enhanced level of protection and operational excellence in your well interventions.

Introducing the new multi-trip stackable STX-SPAN version from ID OILTOOLS! This cutting-edge system is the perfect solution for isolating longer intervals in flowing or static wells. With the ability to be deployed on wire line, slick line, coil tubing or conventional tubing, the STX-SPAN is versatile and can be used in a variety of applications. The STX-SPAN is also ideal for wells with limited rig up height and on wells that have severe dog legs where only short sections will pass. Each section seals to the previous one via a ratchet latch stinger and seal bore receptacle, making it easy to use and efficient. Our stackable X-SPAN products allow for long straddle systems to be deployed in multiple runs, making it perfect for when lubricator length or well accessibility is an issue. With the ability to isolate the top and bottom of the intended zone using X-SPAN or GTX-SPAN elements, this technology allows for extremely long isolation systems to be deployed. Additionally, specially engineered seal assemblies are utilized between each sequential intermediate section for added reliability. The STX-SPAN can incorporate standard off-the-shelf customer supplied tubulars as straddle base pipe material, and can incorporate sand screens, slotted liner, flow control devices such as profile nipples and sliding sleeves. It is also rated for high pressure and high temperature applications, making it perfect for a variety of environments. So, if you're looking for a versatile, reliable, and easy-to-use system for isolating longer intervals in your wells, look no further than the STX-SPAN from ID OILTOOLS! Contact our Tech Services department for assistance and more information on this game-changing product.

Navigating Through Technological Challenges: Nulux Offers Unparalleled DCS Infrastructure Technical Support In the fastidious realm of the oil and gas industry, a well-oiled Distributed Control System (DCS) isn’t just an ancillary asset; it’s the digital backbone supporting the streamlined operations, analytical assessments, and safety protocols so critical in such a challenging environment. With Nulux Network Solutions at your helm, not only is your DCS infrastructure skillfully designed and implemented, but its continual functionality is upheld through our impeccable technical support. Nulux: A Beacon of Robust Networking in the Industrial Sector With a prestigious track record of over two decades, Nulux Network Solutions spearheads the industry in telecommunication and networking solutions. We’ve diligently crafted, upgraded, and meticulously maintained a myriad of copper cabling systems, including telephone, ethernet, coax, and hybrid networks, to ensure your industrial projects always remain a step ahead technologically. Our specialization extends beyond mere installation and permeates every aspect of network management, providing you a comprehensive turnkey solution. With our eyes fixed on providing unparalleled service quality, we've carved our niche, particularly in upgrading and maintaining DCS networks, proving time and time again that when it comes to networking, we're a name you can trust. Technical Support that Speaks Volumes We don’t just stop at providing you a stellar DCS infrastructure; our technical support is always at your beck and call, ensuring that your network runs seamlessly, uninterrupted, and continues to facilitate operational excellence. Here’s how our Technical Support stands apart: 24/7 Availability: In an industry that never sleeps, our technical support is available round the clock, ensuring that help is always a call away. Expert Troubleshooting: With a team adept in diagnosing and resolving issues swiftly, any disruptions are promptly addressed, minimizing downtime and keeping your operations in perpetual motion. Life Cycle Management: From planning and implementation to upgrades and maintenance, our support encompasses every phase, ensuring your DCS infrastructure continually evolves and aligns with technological advancements. Tailored Solutions: Understanding that no two networks are identical, our solutions are customized, catering to the specificities of your DCS infrastructure, providing targeted, effective, and efficient support. Why Our Copper Network Reigns Supreme Our copper network doesn’t just promise high-bandwidth transmission and long-term reliability; it assures your DCS infrastructure is equipped with a network that is inherently: Cost-Effective: Ensuring you don’t have to compromise quality for cost. Flexible and Durable: Capable of withstanding the demanding operational environment and evolving in tandem with your expanding needs. Easily Terminated: Allowing for swift modifications and expansions as per operational demands. Ensuring Your Success is Uninterrupted with Nulux In the multifaceted world of the oil and gas industry, ensuring that your business is equipped with an unshakeable DCS infrastructure, backed by an unwavering support system, isn’t just beneficial; it’s quintessential. With Nulux Network Solutions, you’re not merely adopting a network; you’re embracing a partnership where your success becomes a shared objective. Engage with Nulux and explore how our unparalleled DCS infrastructure technical support can ensure that your operations never falter, your network never falters, and your success story continues unabated. Contact us today for a consultation that will pave the way toward a technologically fortified future.

The FXE wireline-retrievable flapper valve, which is normally closed, is held open by hydraulic control pressure from the surface. The valve operates on a hydraulic piston principle. To open, hydraulic pressure slightly higher than the well pressure is applied to move the piston downward. This pressure unseats the secondary seat, allowing pressure to enter through equalizing ports. Then, as additional hydraulic pressure is applied to the piston, it continues downward movement, pushing the flapper open. The flapper hinge assembly is designed such that the force on the piston is not applied directly on the hinge pin. Upon loss of hydraulic pressure in the control line, the valve’s large spring serves to lift the hydrostatic head of the control fluid. The flapper spring is designed to close the valve when the piston moves up past the flapper. Opening Prong Nose Seal The FXE valve uses the valve housing as the downstop for the opening prong. This metal-to-metal (MTM) interface is designed to prevent flow from passing between the valve housing and the opening prong. The MTM interface isolates the flapper and seat from fluid flow while the valve is open. This design creates an MTM interface with the full force exerted by the hydraulic piston, minus the spring compression force, holding the two metal faces in contact. Radius of Curvature at Flow Entrance Halliburton conducted a study with various curvatures on the entrance to the valve. The study tested abrasive fluids flowing through different test subs and examined the resulting wear patterns. As a result, an optimum radius of curvature was determined and implemented on the valve housings of all wireline-retrievable safety valves. Applications » General production completions Features » Equalizing-type flapper closure » Solid construction flapper made from bar stock » Spherical radius seat on flapper improves seal reliability » Sealing and seating surfaces are out of the well production flow path when valve is in the open position *information referenced from supplier catalog.

HOCA Oil Tools: Enhancing Well Integrity with Circulating Type Blanking Plugs for Nipples In the intricate world of oil and gas extraction, maintaining well integrity while ensuring operational efficiency is paramount. HOCA Oil Tools, a leader in providing innovative downhole slick line tools, introduces its Circulating Type Blanking Plugs for Nipples, designed to meet and exceed these essential industry requirements. Tailored for seamless integration with landing nipples in wellbores, our products stand as a testament to our commitment to quality, efficiency, and safety in downhole operations. HOCA's Circulating Type Blanking Plugs for Nipples: Engineered for Superior Performance Our Circulating Type Blanking Plugs are meticulously designed to offer robust sealing and pressure control capabilities within the wellbore. These tools are essential for operators looking to manage fluid movement, conduct pressure tests, and maintain well integrity during various stages of well operations. Constructed from high-grade materials and engineered to meet the rigors of the downhole environment, our blanking plugs ensure reliability, durability, and performance. Experience the HOCA Oil Tools Advantage Opting for HOCA Oil Tools’ Circulating Type Blanking Plugs for Nipples means selecting a solution that embodies innovation, operational excellence, and reliability. Our commitment to delivering high-quality downhole solutions ensures that our products not only meet but surpass the challenges faced in modern oilfield environments. By incorporating our Circulating Type Blanking Plugs into your downhole operations, you take a step towards enhanced well integrity, safety, and operational efficiency. With HOCA Oil Tools, you gain not just a supplier but a partner dedicated to supporting your downhole challenges with state-of-the-art solutions and comprehensive service. Choose HOCA Oil Tools for your downhole needs and unlock the full potential of your operations with our Circulating Type Blanking Plugs for Nipples. Partner with us, and elevate your downhole operations to new levels of success and efficiency. With HOCA Oil Tools, enhance your downhole activities with tools that set new industry standards for reliability, safety, and performance in the competitive world of oil and gas extraction.

The spill kit contains a curated selection of components designed for effective and targeted response to oil-based spills. 5 Oil-Only Absorbent Pads Size: Standard 8” x 11.5” Purpose: Swiftly absorb and contain oil-based liquids, preventing further spread and facilitating quick cleanup. 3 Oil-Only Absorbent Pillows Size: 18” x 18” Purpose: Larger pillows for enhanced absorption, particularly useful for managing larger volumes of spilled oil. 2 Oil-Only Absorbent Socks (3"x4') Size: 3 inches in diameter, 4 feet in length Purpose: Contain and control the spread of oil spills, especially effective in restricting the movement of liquids in confined spaces. Disposal Bags Purpose: Facilitate the proper containment and disposal of used absorbent materials, ensuring a responsible and hygienic cleanup process. Nitrile Gloves (1 Pair) Purpose: Essential personal protective equipment for safe handling during the cleanup, protecting hands from direct contact with oil-based substances. Advantages and Applications • The combination of pads, pillows, and socks caters to different spill sizes and scenarios, providing a versatile solution for oil-based spills. • The inclusion of larger pillows enhances the kit's capacity to address spills effectively, ensuring a swift and comprehensive cleanup process. • Nitrile gloves prioritize the safety of personnel involved in the cleanup, preventing direct contact with potentially harmful substances. • Disposal bags contribute to responsible waste management, ensuring the proper containment and disposal of used absorbent materials. The spill kit is well-suited for a range of industrial operations, where oil-based spills may occur. Its comprehensive components make it a valuable tool for addressing various spill sizes and ensuring a quick, efficient, and environmentally responsible cleanup process. The spill kit boasts a total absorption capacity, capable of absorbing up to 15 liters (3.87 gallons) of liquid. This capacity signifies the kit's effectiveness in managing spills of varying sizes, making it a reliable and versatile solution for fluid cleanup. Whether addressing smaller incidents or more substantial spills, the spill kit's impressive absorption capacity ensures a comprehensive and efficient response to liquid-based challenges. Water-Resistant Spill Kit is designed for oil-based spills, showcasing water-resistant properties. The kit's composition ensures effective cleanup of oil spills in diverse environments, including land, rivers, lakes, and oceans. By selectively absorbing oil while repelling water, it provides a reliable solution for managing oil spills in various settings, making it versatile and suitable for a wide range of spill response scenarios.

ELEKS Data Science Services: Unleash the Power of Data for Business Growth In the age of information, harnessing the potential of your data is paramount for business success. At ELEKS, we don't just work with data – we transform it into actionable insights that supercharge your business performance. Our Data Science Services are your gateway to unlocking the untapped potential within your data and driving growth. Dive Deep into Data and Elevate Business Performance: Utilize Data for Sales Boost: Our offerings span across diverse sectors such as e-commerce, retail, fashion, and finance. With expert data analysis and machine learning development services, we empower businesses to extract insights that fuel personalized customer experiences. Enhance sales, reduce churn, optimize conversions, and elevate your Average Order Value (AOV) by harnessing tailored solutions. Enhance Operational Efficiency: The logistics and agriculture sectors benefit from our data science consulting and optimization services. Embrace machine learning models for predictive maintenance, smart route planning, yield optimization, and fraud detection. Revolutionize business efficiency and drive results with cutting-edge insights. Navigate Risks with Confidence: Make informed decisions that mitigate risks. We empower you with prescriptive analytics and machine learning models that predict market demand, qualify leads, and enhance your business processes. Gain a competitive edge by focusing your efforts where they yield maximum Return on Investment (ROI). Elevate Operational Performance: Efficiency is the hallmark of success. Our data scientists leverage proven machine learning techniques to optimize processes, whether it's managing call center workloads or inventory. Achieve cost-effective asset management and precise controls, streamlining your operations for maximum effectiveness. Deliver Exceptional User Experiences: Elevate user experiences with intelligent digital assistants powered by natural language processing (NLP), computer vision (CV), and deep learning. Transform unstructured content into meaningful insights, enhance customer acquisition and retention, and usher in a new era of interaction. ELEKS Data Science Services: Unlocking Your Potential: 1. Data Analytics and Modelling Modules: Identify insights, seize opportunities, and optimize outcomes. 2. Predictive/Optimization Model Microservices: Realize intelligent solutions tailored to your needs. 3. Comprehensive Documentation and Source Code: Transparent and accessible deliverables. 4. Data Flow Consultancy, Reporting, and Demos: Stay informed and engaged. 5. Guaranteed Quality Level: Excellence is non-negotiable. 6. Analytics Models' Deployment: Bringing insights to life. Why Choose ELEKS’ Data Science Services? 1. Leading Data Science Team: With one of Ukraine's largest data science teams, we tailor approaches to your needs. 2. Expertise and Experience: Decades of expertise in building machine learning models that deliver results. 3. Cost-Effective Consultation: Test your hypotheses efficiently with our data science consulting services. 4. Business-Centric Approach: Our experts combine technical prowess with business acumen. 5. Descriptive Analytics: Interpreting historical data to optimize your business value chain. 6. Predictive Analytics: Focused insights to drive ROI, manage risks, and quantify success. 7. Prescriptive Analytics: Evidence-based decision-making for strategic planning. 8. Process Optimization and Automation: Automate workflows and enhance controls. 9. ELEKS Data Science Platform (eDSP): Streamlining model management for streamlined success. Embrace the Future with ELEKS Data Science Services: In a world awash with data, ELEKS is your compass, guiding you towards data-driven excellence. From sales enhancement to risk mitigation, we empower businesses with insights that drive success. With ELEKS, your data is not just a resource – it's your competitive advantage. Welcome to the realm of data transformation – welcome to ELEKS Data Science Services.

Stay Committed to Your Home Country with Dunbridge Financial's Personal Services: Simplify Tax Payments Life can take us to different corners of the world, but it's essential to stay connected to our home country and fulfill our commitments, especially when it comes to tax payments. At Dunbridge Financial, we understand the importance of keeping your home country obligations up to date, and that's why we offer Personal Services tailored to your specific needs, including hassle-free tax payments. Ensure Your Home Country Commitments with Ease Paying taxes to your home country while living abroad can be a daunting task. But with Dunbridge Financial, it's a breeze. Our streamlined services enable you to fulfill your tax responsibilities promptly and securely, no matter where you are in the world. Stay committed to your financial duties and gain peace of mind knowing that your tax payments are in safe hands. Experience Our Personal Services At Dunbridge Financial, we believe in providing services that make managing your personal finances simple and stress-free. Here's what sets us apart: 1. Live Rates with No Hidden Fees Transparency is the foundation of our services. When you choose Dunbridge Financial, you won't encounter any hidden fees. What you see is what you get - access our live exchange rates and ensure that you're making the most out of your money. 2. Security is Our Priority The security of your funds and data is of utmost importance to us. We partner with payment service providers who adhere to ISO27001 compliance, ensuring that your finances are managed with the highest levels of safety and security. Enjoy peace of mind knowing that your financial transactions are protected. 3. Easy to Use, Easy to Save Managing your finances shouldn't be complicated. With Dunbridge Financial, it's as simple as can be. Sending money to over 100 countries is just a few clicks away. Select your destination, choose the recipient, lock in your exchange rate, and you're done! Saving time and money has never been easier. Why Choose Dunbridge Financial? We are more than just a financial service provider - we are your trusted partner in managing your personal finances. When you choose Dunbridge Financial, you gain access to: • Cutting-edge technology for seamless and efficient transactions • Expert guidance from our dedicated team, ensuring your needs are met • Secure and compliant processes that prioritize your financial well-being Join Us Today and Simplify Your Tax Payments Don't let tax payments be a source of stress. Join Dunbridge Financial today and experience a world of ease, convenience, and security when it comes to managing your personal finances. Whether you're making tax payments to your home country or sending money to loved ones abroad, we are here to make your financial journey a breeze. Simplify your tax payments with Dunbridge Financial. Sign up now and embrace a worry-free, well-connected financial experience.

SSG Consulting is a Project, Engineering and Construction Management Consulting firm, specializing in the implementation of Business and Project Management solutions on Mega projects in various industries. - Authorised KEY360 channel partner Our services cover the following: - Project Advisory & Audits - EMPCM Execution - Specialist Project Controls & Forensics - Project Digitalisation - Project Resourcing - Analytics & Dashboarding Our Track Record: - 25 BILLION MANAGED VALUE - 300 MILLION PLATFORM TRANSACTIONS - 80 DEDICATED STAFF - 10X BUSINESS PROCESSES IMPROVEMENT

Transform Your Perforation Operations with HOCA Oil Tools' Mechanical Tubing Perforator In the competitive landscape of the oil and gas industry, achieving precise, efficient, and cost-effective downhole operations is crucial. At HOCA Oil Tools, we understand these challenges and are committed to providing state-of-the-art solutions. Our Mechanical Tubing Perforator stands out as a pinnacle of innovation, specifically designed to enhance the efficiency and accuracy of perforation operations. HOCA’s Mechanical Tubing Perforator: Engineering Precision for Downhole Success The Mechanical Tubing Perforator by HOCA Oil Tools is meticulously engineered to provide precise and efficient perforations in tubing, essential for effective production and injection operations. Crafted from robust materials and designed to withstand harsh downhole environments, our Mechanical Tubing Perforator ensures optimal performance and reliability, delivering clean, precise perforations that enhance fluid communication and well productivity. Experience the HOCA Advantage in Downhole Perforation At HOCA Oil Tools, we pride ourselves on advancing the field of downhole operations with innovative, reliable, and cost-effective solutions. Our Mechanical Tubing Perforator is a testament to this commitment, offering a level of precision, efficiency, and safety that sets new industry standards. Incorporating the HOCA Mechanical Tubing Perforator into your downhole operations signifies a move towards enhanced operational efficiency, safety, and cost-effectiveness. With HOCA Oil Tools, you not only acquire a tool; you gain a strategic partner dedicated to supporting your operational success with leading-edge solutions and comprehensive service. Choose HOCA Oil Tools' Mechanical Tubing Perforator for your downhole needs and join the ranks of industry leaders who trust our products to enhance their operations. Elevate your downhole operations with HOCA Oil Tools – where innovation, precision, and efficiency drive everything we do.

Pipe Tally Tracking Made Effortless with PipeDNA: Enhancing Accuracy and Efficiency Accurate and efficient pipe tally tracking is crucial in the oil and gas industry to ensure the smooth flow of operations and maintain optimal inventory levels. Introducing PipeDNA, a smart cloud-based platform dedicated to managing pipe and tube throughout the oil and gas supply chain. With its powerful features and innovative technology, PipeDNA empowers stakeholders to proactively manage their pipe tally operations, automate workflows, and increase visibility, ultimately improving productivity and reducing costs. Streamline Pipe Tally Operations: PipeDNA offers a comprehensive set of tools to simplify the creation and management of pipe tally operations. With intuitive functionalities, users can effortlessly create and configure tally jobs, define parameters, and automate the entire tallying process. By eliminating the need for manual calculations and paperwork, PipeDNA streamlines pipe tally operations, saving time and reducing the potential for errors. Automated Workflows for Increased Efficiency: The automation capabilities of PipeDNA revolutionize pipe tally tracking, enabling stakeholders to implement standardized and efficient workflows. Once the tally operations are set up, PipeDNA automates the process by capturing real-time data and performing calculations, ensuring accurate and up-to-date tally results. By eliminating manual data entry and reducing human errors, PipeDNA enhances the overall efficiency of pipe tallying processes. Real-Time Visibility and Reporting: PipeDNA's inventory management and tracking feature provide real-time visibility into pipe utilization, activity, and trends. With a centralized dashboard, stakeholders can access comprehensive reports and analytics, allowing them to make data-driven decisions regarding inventory optimization, resource allocation, and operational planning. The ability to track pipe movements and monitor tally results in real-time empowers stakeholders with valuable insights, fostering informed decision-making. Seamless Integration for Enhanced Traceability: Identification and traceability are essential aspects of pipe management. PipeDNA excels in providing quick and accurate pipe identification through its integration capabilities. By seamlessly integrating with popular barcode standards such as UPC, EAN, and QR codes, PipeDNA enables users to easily identify and track pipe details, activity history, and traceability documentation. This integration ensures that stakeholders can swiftly locate and trace specific pipes, reducing downtime and improving operational efficiency. Designed for the Oil and Gas Industry: PipeDNA was meticulously crafted by drilling engineers and technology innovators to cater to the unique needs of stakeholders across drilling, manufacturing, and oilfield services. Whether it's drilling contractors, oilfield rental companies, oilfield and inspection services, steel pipe manufacturers, or pipe distribution and storage providers, PipeDNA offers tailored solutions to enhance their pipe tally tracking processes. Leveraging Emerging Technologies: At its core, PipeDNA leverages the latest advancements in technology to streamline workflows and digitize pipe management processes. The platform is RFID ready, offering seamless integration with RFID technologies such as labels and asset tags. Additionally, PipeDNA supports IoT data integration using the MQTT standard, enabling fast and efficient integration of sensor data. These emerging technologies empower stakeholders to harness the power of automation and data-driven insights for improved pipe tally tracking. PipeDNA revolutionizes pipe tally tracking in the oil and gas industry by providing a smart cloud-based platform that enhances accuracy, efficiency, and visibility. With its powerful features, seamless integration capabilities, and commitment to leveraging emerging technologies, PipeDNA empowers stakeholders to proactively manage their pipe tally operations, automate workflows, and make informed decisions based on real-time data. Streamline your pipe tally tracking processes with PipeDNA and elevate your operational efficiency to new heights.

The WellStar® tubing-retrievable safety valve (TRSV) is a general production, hydraulically operated, downhole TRSV. The rugged hydraulic actuator of the WellStar safety valve provides durability and isolates the internal workings from well fluids through its unique construction. The metal-to-metal (MTM) sealing integrity in the body joints and closure mechanism places it in a premium valve category while featuring an economical price. Proven through years of installations, the simple, compact design enhances the valve’s overall reliability and provides for trouble-free operation. Applications » General production completions Features » Simple, compact design » Complete MTM well containment in the closed position (body/seat connections and flapper) » MTM flapper sealing (no resilient seal required) » Unique hydraulic actuation (single-piece piston/ flow tube) » Hydraulic chamber construction isolates the majority of the internal valve components and exposes them to clean hydraulic fluid » Positive debris barrier at both ends of flow tube in full open position » Maximized piston area and spring force » Flow tube construction prevents well solids and debris from settling on top of the piston *information referenced from supplier catalog.

Illuminate Your World with the Wisdom Lamp 4A Retail Blister Pack – Now at Provix Provix is delighted to present the Wisdom Lamp 4A Retail Blister Pack, the ultimate lighting solution for a range of activities. Whether you're into rock climbing, night fishing, diving, or need reliable lighting for construction and emergency rescue, the Lamp 4A is your go-to source of illumination. Complete Package for Versatile Use The Lamp 4A Retail Blister Pack includes a 3A or 4A Cap Lamp, a magnetic USB charger, and a head strap. This comprehensive package offers everything you need for hands-free lighting in various environments. The easy-to-use head strap ensures the lamp stays secure, whether you're scaling a cliff or navigating a dark construction site. User-Friendly and Efficient Charging Charging the Lamp 4A is hassle-free. Simply connect the magnetic head to the lamp's charging interface and the USB connector to a Wisdom power adapter or any USB port. This flexibility allows you to charge your lamp at home, in the office, or even in your car. Outstanding Technical Specifications The Lamp 4A boasts impressive technical data, ensuring it meets your lighting needs: • Rated Capacity: 7,000mAh • Rated Voltage: 3.7V • LED Working Current: HI 1,400 mA, ME 570 mA, LO 80 mA • Initial Lighting Degree in 1m: HI 25,000 lx, ME 12,000 lx, LO 1,800 lx • Light Luminous Flux: HI 533 lm, ME 265 lm, LO 50 lm • Continuous Discharging Time: HI 5 hours, ME 13 hours, LO 60 hours • Light Power: HI 4.2W, ME 1.17W, LO 0.24W • Charging Time: 5 hours • Weight: 169g (5.96 oz) • Dimensions: 84x69x50mm (3.3x2.7x2.0in) Safety and Durability With a short circuit protection time of less than 320μs and a battery lifespan of 1,200 cycles, the Lamp 4A is not only safe but also durable. Its robust construction ensures it can withstand the rigors of various activities and work environments. Your Ideal Companion for Any Adventure or Task The Wisdom Lamp 4A Retail Blister Pack is an essential tool for anyone needing reliable and versatile lighting. Available now at Provix, this pack is perfect for all your adventures and professional tasks. Visit www.provix.net to learn more and get your hands on this indispensable lighting solution.

Full moon sheaves are designed to be used in conjunction with Sivam spooling units. Spooling units designed to ensure cables or control lines are kept in tension while running in or out of hole. Our spooling units are fully designed, manufactured and assembled with sheaves (half or full moon) to guide control, injection, or mono-conductor cable preventing damage while being tripped in hole. Units are available in pneumatic, hydraulic, or electric drive and are ATEX zone and DNV certified as required by location. Spooling units can also be equipped with a filling pump to monitor pressure while tripping – improving efficiency as a sudden pressure drop indicates line damage.

Streamlining Downhole Diagnostics: InWaTec Combined’s Integrated GR-CCL Services In the intricate world of well logging and evaluation, the ability to gather comprehensive data efficiently is a vital component of operational success. InWaTec Combined is proud to introduce our integrated Gamma Ray & Casing Collar Locator (GR-CCL) Services, a dual-function tool that synergizes gamma radiation measurement with precise casing collar detection. The GR-CCL is a testament to the power of combined diagnostics. It merges the functionality of a Gamma Ray tool, utilizing a Sodium Iodine Scintillation Detector, with the precision of a Casing Collar Locator. This powerful combination allows for the passive measurement of natural gamma radiation alongside the identification of changes in metal thickness, indicative of casing collars. Our GR-CCL Services empower operators with a two-fold diagnostic capability. The Gamma Ray aspect of the tool is essential for understanding the stratigraphy and identifying the presence of potentially productive zones. The Sodium Iodine Scintillation Detector is meticulously calibrated to capture the nuances of gamma radiation within the geological formations, providing a reliable indicator of downhole lithology. Simultaneously, the CCL component of the GR-CCL tool pinpoints the precise location of casing collars. This feature is crucial for depth correlation and ensuring that interventions such as perforating or sidetracking are executed at the correct depths. The ability to detect changes in metal thickness with high accuracy ensures that operators have a clear understanding of the casing's structural transitions. By integrating these two critical measurements, InWaTec Combined’s GR-CCL Services eliminate the need for multiple runs, saving time and reducing operational costs. The efficiency of this dual-action tool translates into faster decision-making and enhanced well intervention planning. InWaTec Combined’s commitment to innovation is embodied in our GR-CCL Services, where we provide more than just data—we offer a comprehensive solution that enhances the accuracy and efficiency of well logging operations. By deploying our GR-CCL tool, clients benefit from a streamlined approach to well diagnostics, bolstering their ability to make informed decisions with confidence. Choose InWaTec Combined’s GR-CCL Services for your well logging needs and embrace the clarity and precision that come with cutting-edge downhole diagnostic technology. Let our integrated solutions illuminate the path to optimized well performance and operational excellence.